My Orders
1069534 Kenmore Dehumidifier - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
The humidifier would run continuously regardless of the humidity setting.
3 of 4 people
found this instruction helpful.
-
Stephen from Richfield, NC
- Easy
- Less than 15 mins
-
Nutdriver, Pliers
I removed the old humidistat and replaced it with the new one which was an exact fit.
Was this helpful?
Thank you for voting!
Dehumidifer collection pan (bucket) overflowing with water
-
Carl from Tuscaloosa, AL
- Easy
- 15 - 30 mins
-
Pliers, Screw drivers, Wrench (Adjustable)
The unit should cutoff when the pan gets full enough for it to depress the pan full switch on the back of the unit. Used an ohm-meter to check and see that this switch was bad. Replaced with this part and now it cuts off again when the pan is full. Not hard at all. Take the cover off the unit (screws) then take the switch out (nut) and re
... Read more
place.
Read less
Was this helpful?
Thank you for voting!