1065921 Kenmore Refrigerator - Parts

This screw is sold individually. It is a genuine OEM replacement part, and it is designed for use with refrigerators. Most often it is used with the ice bucket ice deflector, retainer clip, and front cover. Due to varied uses we recommend referring to model-specific diagrams for exact placement. This screw measures 8-18 by 1/2 inch.

This door gasket is used to make an air-tight seal for the cabinet when the door is closed.

This screw is sold individually.

Sold individually.

The speed nut (also referred to as a condenser motor fan nut), fits onto the condenser fan motor. The motor for this fan turns on simultaneously with the evaporator and the compressor motors, so a malfunction in the condenser fan motor could cause your fridge to cycle on and off more frequently or run too warm, or too noisily. Make sure t...Read morehat the speed nut is properly attached and tight. Check the nut for any signs of wear or damage. If the nut is damaged and refuses to tighten, you should replace the part immediately. Remember to unplug your refrigerator before starting this repair.

Sold individually.

Sold individually.

This is an ejector arm, and it is used in conjunction with your refrigerator. The function of this part is to act as a cube ejector inside your ice maker. The arm will rotate inside the ice maker to allow the ice cubes to fall out of the marker and into the ice bucket. This part is made entirely of plastic, is white in color, and has eigh...Read moret teeth. It measures just over 9 inches long, and one and a half inches wide. To make this installation the tools you will need include a quarter-inch nut driver, a flat-head screwdriver, and a Phillips screwdriver.

This water inlet valve, used in refrigerators, releases water from the water supply line to the ice maker and water dispenser to make ice. If your ice maker is not making ice, leaks, or no water is coming out of the dispenser, replacing this part can fix the problem. Remember to unplug your refrigerator from the power source and disconnec...Read moret the water supply as a safety precaution. Refer to the manual provided by the manufacturer for further installation instructions and a detailed diagram.

Sold individually.

Sold individually.