1065921 Kenmore Refrigerator - Parts

The defrost heater keeps the cooling coils from frosting over.

This door gasket is used to make an air-tight seal for the cabinet when the door is closed.

This part helps protect the motor from overheating. The relay is sold separately.

This is a 12oz (about 355 ml) can of black spray paint that is compatible with a variety of different home appliances and is used to cover and conceal any visible scuffs, scratches or chips. This can is sold individually, so consider how much paint you need for your appliances prior to placing an order. To use this spray paint, make sure ...Read moreto have the proper personal protective equipment, such as protective glasses or gloves, as well as a respirator. Clean the surface of whatever you are spraying before you begin and shake the can for 1 minute after hearing the internal mixing balls rattle. Do not spray during high heat or humidity, spray at room temperature and in several thin coats to ensure the best adherence.

This tray is used to collect the access water from the cooling system to prevent water from leaking on to your floor.

This is a terminal cover for the compressor in a refrigerator. This covers the relay and overload switch on the compressor. Once you have gained access to the terminal cover, you will see that the cover is held on by a tension or retaining clip. Simply pop the cover off and replace with the new cover. The cover is made of plastic and is b...Read morelack in color. It measure less than 3 inches long and less than 3 inches wide. This is a genuine replacement part from the original manufacturer.

This nut and insert assembly is used for plastic water lines in refrigerators.

This wire harness has a flat connector.

Sold individually.

This kickplate grille is attached to the bottom of the refrigerator.