My Orders
1065179 Kenmore Refrigerator - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Snack pan drawer was out when refrigerator door was closed. The snack pan drawer was cracked and needed to be replaced.
4 of 5 people
found this instruction helpful.
-
Jack from Austin, TX
- Really Easy
- Less than 15 mins
Replacing the drawer was extremely easy. The refrigerator door need to be completely opened. Drawer slides out very easily and new drawer slides in where old drawer came out. Three minute job, tops.
Was this helpful?
Thank you for voting!
Broken shelf for snack drawer
4 of 5 people
found this instruction helpful.
-
Kay from LA CRESCENTA, CA
- Very Easy
- Less than 15 mins
Slide drawer in and fit perfectly.
Was this helpful?
Thank you for voting!
old filter was overdue for replacement
4 of 5 people
found this instruction helpful.
-
gene from COTTONDALE, FL
- Very Easy
- Less than 15 mins
ordered new filter, removed old filter from fridge, and installed new one
Was this helpful?
Thank you for voting!
LED Light was out in freezer
5 of 8 people
found this instruction helpful.
-
Victoria from SCARBOROUGH, ME
- Very Easy
- Less than 15 mins
Unplugged the old one and put in new one. So simple I didn’t need my husband’s help
Was this helpful?
Thank you for voting!
needed another shelf
4 of 5 people
found this instruction helpful.
-
Carol from JUPITER, FL
- Very Easy
- Less than 15 mins
slide right in. Easy
Was this helpful?
Thank you for voting!
Old one leaks on one side
4 of 5 people
found this instruction helpful.
-
Orlando from Bayonne, NJ
- Very Easy
- Less than 15 mins
Simply cut the water tube on both sides of connector and push in the new one.
Was this helpful?
Thank you for voting!
One of the shelves broke and needed to be replaced
3 of 3 people
found this instruction helpful.
-
Susan from Bloomington, IL
- Very Easy
- Less than 15 mins
It took less than one minute to open the box and place the shelf in the fridge!
Was this helpful?
Thank you for voting!
Replaced cracked slide out glass shelf with new one
3 of 3 people
found this instruction helpful.
-
Michael from ROYSE CITY, TX
- Very Easy
- Less than 15 mins
Simply slid out damaged shelf and slid in new one
Was this helpful?
Thank you for voting!
ice container bin cracked and had a hole in it.
5 of 9 people
found this instruction helpful.
-
Joseph from MESQUITE, NV
- Very Easy
- Less than 15 mins
Took it out of the box. Emptied the ice out of the broken bin. Slid the new one in and all done.
Was this helpful?
Thank you for voting!
Used a flat head screwdriver to pop the old light out.
4 of 6 people
found this instruction helpful.
-
Linda from MURFREESBORO, TN
- Really Easy
- Less than 15 mins
-
Screw drivers
Plugged the new one in and snapped it into place. Only other need is a lantern or someone to shine a flashlight over your shoulder since the old light is, presumably, out.
Was this helpful?
Thank you for voting!
Bin right mounting rail worn, requiring a new bin.
3 of 3 people
found this instruction helpful.
-
Roy from BEAUMONT, TX
- Really Easy
- Less than 15 mins
From the Expanded view on the website, I chose the bin -I thought. The expanded view picture is too small and I got the shelf instead. -But a phone call got everything back on track.
Repair involved a knife to open the box!
Repair involved a knife to open the box!
Was this helpful?
Thank you for voting!
Drum broken; ice wouldn't dispense
3 of 3 people
found this instruction helpful.
-
Brenda from Downs, IL
- Really Easy
- Less than 15 mins
-
Nutdriver
1. Pull out drawer. 2. Remove screws to release the auger. 3. Unscrew the end of the auger. 4. Pull parts off. 5. Replace drum. 6. Replace parts in the correct order. 7. Twist end of auger back on. 8. Replace unit onto drawer and install mounting screws. 9. Place drawer in freezer. 10. Test ice dispenser. 11. Watch kitten run t
... Read more
o refrigerator and beg for ice cube. 12. See smiles on family members faces.
Read less
Was this helpful?
Thank you for voting!
Auger would not turn properly
6 of 12 people
found this instruction helpful.
-
Tanya from Lakebay, WA
- Easy
- Less than 15 mins
I took out the ice bin and in the back where the auger meets the ice bin I had to replace the small plastic piece to hold the auger in place when using the automatic ice maker. It was an easy fix.
Was this helpful?
Thank you for voting!
Shelf broke when I was trying to remove it.
3 of 3 people
found this instruction helpful.
-
Rebecca from ELYRIA, OH
- Really Easy
- Less than 15 mins
I ordered another shelf w glass. Put back in refrigerator and it fit perfectly.
Was this helpful?
Thank you for voting!
Part went bad the freezer was freezing up and refrigerator not getting cold
3 of 3 people
found this instruction helpful.
-
Jessica from WILLIAMSBURG, VA
- Really Easy
- 15 - 30 mins
-
Nutdriver
I pulled off the panel covering the part in the freezer cut and stripped the wires. Used crimper and connectors put the new part on put the wires band panel back on and plugged the refrigerator back in. Everything works just fine now.
Was this helpful?
Thank you for voting!