10421 - Parts

It is an authentic Toro hardware. The washer-clutch is supplied from the original equipment manufacturer for use on lawn mowers. It helps to engage the pinion gear which is an important component that drives the wheel assembly. If the motor runs but the drive wheel is not spinning, a broken or worn washer-clutch may be the reason. To ensu...Read morere the exact location and the correct application of this item, refer to the appropriate diagrams of your model. Note, one durable plastic washer-clutch is included. You will need a wrench set to remove and resecure the wheel when replacing this hardware.

The Handle (or Knob Handle) is a black, plastic part which is rated as "Easy" to install by customers. It attaches onto the handle, so you can quickly release to fold down the handle bar. If the part is visibly broken (due to wear/fatigue), it should be replaced. Refer to your make, model and diagram to check if this is the right part for you.

This genuine replacement part is supplied from original equipment manufacturer. It is a commonly used item on Toro lawn mowers. The purpose of this shoulder bolt is to secure a wheel to the axle. This bolt has a hex head which requires a wrench to secure. Includes one (1) bolt per order.

This authentic item is supplied directly from the original equipment manufacturer for use with engines, outboard motors, portable generators, snowthrowers, and lawn mowers made by Briggs & Stratton and Toro. The o-ring seal attaches to the dipstick. When replacing this part a socket set might be required during the installation process. I...Read moret is made out of rubber and will need to be replaced if it breaks. This part is available as an individual replacement.

The blade within a lawn mower is one of the most important components, since it is what cuts the grass itself. This OEM blade is a high-lift blade made of high-quality metal and measures 21-inches in length and features 3 holes in its middle to attach to the spindle. Since this blade is high-lift, it is designed to cut the grass cleaner a...Read morend leave fewer clumps of grass behind and helps to generate more airflow within the mower deck. This blade is compatible with several different makes and models of lawnmower but is sold as an individual part without any securing hardware. If you notice that your blade is damaged, dull or warped, it will need to be replaced immediately. To replace this blade, you will need tools such as a socket wrench and it is recommended that you use gloves to prevent cutting your hands when installing the new blade. Put your mower on its side to prevent oil or fuel leakage, and then using a socket wrench, disconnect and remove the old blade carefully before cleaning the area and installing the new blade.

This part is an OEM from Briggs and Stratton, Toro for use with lawn and garden equipment engines. The air filter collar gasket seals the gap between the air filter collar and the carburetor. The most common reason for replacing the air cleaner gasket is if it is damaged, clogged, or missing, causing the engine to not start. This part is ...Read moresold individually. The tools that you will need to replace the air cleaner gasket are a 5/16" socket or nut driver and a Phillips head screwdriver.

This is an authentic Toro replacement part that has been sourced from the original manufacturer to be used with walk-behind lawnmowers. The plastic pivot stop attaches to the upper handle and is used prevent the control bail from pivoting too far and breaking the cable. This item is available as an individual replacement part.

This is an authentic replacement part manufactured for use with small engines. The gasket is used to seal the cylinder intake. It is recommended to replace gaskets when servicing the engine to ensure proper seals when the parts are reassembled. This gasket is sold as an individual replacement part, please see model diagram for associative parts.

It is an authentic OEM supplied exhaust gasket that is designed to provide an air tight seal between the muffler and the exhaust pipe. This part is specially produced for use with Briggs and Stratton engines commonly installed on Toro lawn and garden equipment. Over time gaskets tend to shrink, become brittle and crack eventually requirin...Read moreg replacement. It is made of high-quality composite material and it is sold individually.

This part is an OEM sourced directly from the manufacturer for use in Briggs & Stratton engines and Toro lawn mowers. The air cleaner screw attaches to the air cleaner. It may require a wrench during installation. Over time this screw may become stripped or broken and will need to be replaced. Keep in mind this part is made of metal and is sold individually.

It is a genuine OEM sourced replacement screw which is specially designed for use with Briggs and Stratton engines commonly installed on lawn and garden equipment. Please refer to the appropriate diagrams of your model for the correct location and application of this hardware. This durable metal screw is sold individually, you will need a wrench to secure or remove it.

This is a genuine OEM sourced component which is specially designed for use with Toro lawn and garden equipment. This is a special hardware that is secured on the transmission shaft. It is an identical replacement for a missing or a faulty item that was installed on a new unit, please make sure to refer to the appropriate diagrams of your...Read more model for the correct location and application of this compression spring. Keep in mind this high-quality part is made of durable metal and is sold individually.