EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

10362 - Instructions

All Instructions for the 10362
121 - 135 of 323

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Oven was burning food
0 of 1 people found this instruction helpful.
  • Dane from Baton Rouge, LA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Two screws hold the element to the oven wall. two wires attached to the back of the element. very simple removal and replacement.
Was this helpful?
Thank you for voting!
bake element burnt out
0 of 1 people found this instruction helpful.
  • Ronald from MAHWAH, NJ
  • Really Easy
  • Less than 15 mins
  • Socket set
unscrewed it unhooked the wires and replaced with new part
Was this helpful?
Thank you for voting!
My bake element broke in half
0 of 1 people found this instruction helpful.
  • John from Medford, NY
  • Really Easy
  • Less than 15 mins
  • Socket set
First i turned off the main electricity for the oven. Then I removed the two screws with my socket wrench. Then i pulled the element out about 3 inches then disconnected the 2 wires that heated the element. I simply reversed the process to put in the new bake element and i was done.
Was this helpful?
Thank you for voting!
Live in an apartment and they had generic drip pans on the stove causing pots to tilt when cooking.
0 of 1 people found this instruction helpful.
  • Jennifer from Cleveland, OH
  • Really Easy
  • Less than 15 mins
Replaced drip pans that the apartment Superintendent had in place with the correct drip pans and now cooking is beautiful again! No more uneven cooking on the stove top.
Was this helpful?
Thank you for voting!
Oven wouldn't heat
0 of 1 people found this instruction helpful.
  • Craig from Catasauqua, PA
  • Really Easy
  • Less than 15 mins
  • Nutdriver
Turned power off. Removed two screws holding the element. Pulled element out 3 inches, disconnected the two wires, pulled out old element, connected wires of new element, replaced screws. Turned power back on. Eureka!! the oven heats again. :-)
Was this helpful?
Thank you for voting!
the old oven element burned in two.
0 of 1 people found this instruction helpful.
  • Kenneth from Newport, OR
  • Really Easy
  • Less than 15 mins
  • Nutdriver
After removing the screws holding the element in I disconnected the wires and attached alligator clips to the wires to keep them from pulling back inside the holes. I would have had to pull the stove out and removed some covers if they disappeared through the holes. After getting the part number off of the old element, I ordered a new e lement from Partselect.com and received the new one in less the a week. Reinstalling the new element took about 5 minutes.
Was this helpful?
Thank you for voting!
Bottom element cracked/split - open circuit
0 of 1 people found this instruction helpful.
  • Al from Charlotte, NC
  • Really Easy
  • Less than 15 mins
  • Nutdriver
Removed oven shelves (30 seconds). Removed 2 screws holding broken element to oven (2 minutes). Pulled broken element assembly out & removed 2 wires attached to element (1 minute). Connected wires to new element (just push them into place) and mounted new element with the 2 screws (1 1/2 minutes). Turned on oven element to test & sinc e I was so tired from all of this 5-minute activity, I rested.

Al S.
Was this helpful?
Thank you for voting!
Element broke
0 of 1 people found this instruction helpful.
  • Kim from Vancouver, WA
  • Really Easy
  • Less than 15 mins
  • Nutdriver, Pliers
First I switched the fuse to the oven had no power and then I removed the old element and wiped down the inside with a damp towel.
I then attached the new element and then used the screws to attach the element firmly into place.
I then restored power by switching the fuse back and then burned the element to remove and chemicals and then done
Was this helpful?
Thank you for voting!
Oven would not heat up
0 of 1 people found this instruction helpful.
  • John from Wetumpka, AL
  • Really Easy
  • Less than 15 mins
  • Pliers, Socket set
Took out the hexagon screws, used pliers to pull the connecting ends apart, slid in the new element in to the connecting slots, reattached to screws, turned on the oven to see if it would heat up and it did. It was really easy. I had waited for a week to get the part from my local Sears parts house. You sent it out and I had it in 3 da ys. They still don't have the part. Thanks so much.
Was this helpful?
Thank you for voting!
For some time our oven had been working eratically, temperature spikes and drops during baking process. I thought the thermostat was the problem. The last time baking, element sparked and overheated in one spot so we removed the element. It was warped and cracked. We replaced it with the new ele
0 of 1 people found this instruction helpful.
  • Marshall from Prosser, WA
  • Really Easy
  • Less than 15 mins
  • Nutdriver
I removed the two screws with a nut driver, pulled the element out far enough to expose the connection point and disconnected the electrical clips. Upon receipt of the new element I did those things in reverse order and it worked great.
Was this helpful?
Thank you for voting!
10-yr old Baking Element gave out
0 of 1 people found this instruction helpful.
  • Timothy from Boise, ID
  • Really Easy
  • Less than 15 mins
  • Nutdriver
This repair was idiot-proof. Removed 2 screws, unplugged the old part, plugged in the new one, and replaced the 2 screws.
Literally a 2 minute repair!!
Was this helpful?
Thank you for voting!
Element no longer heated
0 of 1 people found this instruction helpful.
  • Karen from Gladstone, OR
  • Really Easy
  • Less than 15 mins
  • Pliers, Socket set
Piece of cake. 2 screws and a flashlight. I needed needle nose pliers to insert the "plugs" into the "sockets."
Was this helpful?
Thank you for voting!
botton bake element burned out
0 of 1 people found this instruction helpful.
  • John from Plano, TX
  • Really Easy
  • Less than 15 mins
  • Nutdriver
Removed to screws holding the bake element in place. pulled out element to get to the 2 electrical connectors. removed connectors from old unit. connected new unit and secured with the screwes. very simple.
Was this helpful?
Thank you for voting!
Baking element was broken.
0 of 1 people found this instruction helpful.
  • Brenda from Orem, UT
  • Really Easy
  • Less than 15 mins
  • Screw drivers
I had grease on the baking element when I turned the oven on. I thought it would burn off, it caught fire and destroyed the baking element. I ordered a new element, it came within two days. I didn't wait for my husband to come home. I got a screw driver, took off the screw, used pliers to pull apart the old baking element from the wire s. I did this carefully , our oven is old and the element was not pulling away easily. I inserted the new element, put the screws in and it worked perfectly! I was very proud of myself but the truth is that this is a simple job.
Was this helpful?
Thank you for voting!
burner broke apart under a pot
0 of 1 people found this instruction helpful.
  • Mary from south bristol, ME
  • Really Easy
  • Less than 15 mins
Pulled out the burner. Just pulled and out it came. Looked you up online. Crawled around on the floor trying to find the model number. (This was the hardest part of the whole process.) Ordered the part; it came the very next day despite the fact that I didn't order special shipping. Unpacked the part, plugged it in. And it worked!!!! ... Read more />
FABULOUS service. Thank you so much.
Was this helpful?
Thank you for voting!
All Instructions for the 10362
121 - 135 of 323