EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

10362 - Instructions

All Instructions for the 10362
106 - 120 of 323

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Heating element broke and not working
0 of 1 people found this instruction helpful.
  • brad from flatwoods, KY
  • Really Easy
  • Less than 15 mins
  • Socket set
Watched youtube....
Was this helpful?
Thank you for voting!
old bake element broke
0 of 1 people found this instruction helpful.
  • Andrew from Cary, MS
  • Easy
  • Less than 15 mins
  • Nutdriver, Pliers
This is how I did it--but I would strongly recommend you do step 4 first, and skip step 3! Remember, because 240V circuits have 2 "hot" wires, they may be "hot" (120V to ground) even when switched off!

1. Removed the mounting screws with a nut driver.
2. Pulled out the old element. BARE lug connectors on loose wires came out with it.
3. Watched an impressive show of sparks.
4. TURNED OFF THE CIRCUIT BREAKER.
5. Separated the connectors. Had to use pliers on the one I "fried".
6. Connected new element (connectors pushed together easily.
7. Reattached with screws
8. Turned breaker back on.
Was this helpful?
Thank you for voting!
Heating element broke and not working
0 of 1 people found this instruction helpful.
  • brad from flatwoods, KY
  • Really Easy
  • Less than 15 mins
  • Nutdriver
Watched youtube. Easy and fast!
Was this helpful?
Thank you for voting!
metal "Y",shape metal long arm attached to burner came loose.holding the coil to burner
1 of 4 people found this instruction helpful.
  • Audret K, from San Diego, CA
  • Really Easy
  • Less than 15 mins
just plugged in the two prings into burner into outlet. Very simple and quick.
Was this helpful?
Thank you for voting!
bake element in oven burned out
0 of 1 people found this instruction helpful.
  • Amy from Etna, CA
  • Easy
  • Less than 15 mins
  • Wrench set
Using a wrench, removed old element and simply installed new one - took less than 10 minutes and the oven was working again! Best part was how quickly the item reached us - ordered it on a Wednesday afternoon and had it by Friday afternoon, with no expedited shipping - Great Service!
Was this helpful?
Thank you for voting!
Bake element burns out heating up easter dinner
0 of 1 people found this instruction helpful.
  • joseph from mastic, NY
  • Really Easy
  • Less than 15 mins
Uplugged the oven and undid the back contact cover, removed the nuts inside the oven and slid out the element. Pushed the new element into place and secured it. Attached the contacts and replaced the cover. Plugged it in and got cookin'.
Was this helpful?
Thank you for voting!
Stove element broke
0 of 1 people found this instruction helpful.
  • Harold from Harrison, AR
  • Really Easy
  • Less than 15 mins
  • Nutdriver, Screw drivers
I removed the 2 nuts and pulled the element out until I reached the disconnect and unhooked the elements from the wire. Replaced the new one in reverse order. It was great finding the part here after Sears said they no longer made the part.
Was this helpful?
Thank you for voting!
bake element burned out, lower unit
0 of 1 people found this instruction helpful.
  • Murray from Franklin Square, NY
  • Really Easy
  • Less than 15 mins
  • Nutdriver, Screw drivers
removed nuts from inside, removed rear panel, pulled old
part out, slipped new part in.
DONE
SHIPPING AHEAD OF TIME, YOUR COMPANY SAVED ME THE PURCHASE
OF A NEW STOVE. THANK YOU FOR FAST & GOOD SERVICE.
NO ONE HAD THE PART BUT YOU FOLKS.
Was this helpful?
Thank you for voting!
oven was not heating properly
0 of 1 people found this instruction helpful.
  • Susan from SAlisbury, NC
  • Really Easy
  • Less than 15 mins
  • Screw drivers
took out the old element after cutting the circuit breaker, put in the new one, it was that easy
Was this helpful?
Thank you for voting!
Bake Element Defective
0 of 1 people found this instruction helpful.
  • Glenn from Newnan, GA
  • Really Easy
  • Less than 15 mins
  • Nutdriver
Cut power to oven from breaker box. Remove two retaining screws using a nutdriver at rear of oven. Slowly pull Bake Element from rear of range exposing connector clips. Disconnect at clips from oven wiring. Connect new Baking Element to wiring connectors. Push new baking element into rear of oven. Reconnect baking element using origin al screws with nutdriver at rear of oven. Turn on power to oven from breaker box. Job complete in 10-15 mins.
Was this helpful?
Thank you for voting!
Bake element had broke and caught fire
0 of 1 people found this instruction helpful.
  • Joey from barto, PA
  • Really Easy
  • Less than 15 mins
  • Wrench (Adjustable)
It was real easy all I had to do was turn the breaker off,Undo two srews and disconnect the two wires. Then repeated the process to install
Was this helpful?
Thank you for voting!
element broke
0 of 1 people found this instruction helpful.
  • joseph from conover, NC
  • Really Easy
  • Less than 15 mins
  • Nutdriver
shut power off to range, took 2 screws out, took 2 snap on clips off old element. put snap on clips on new element, put 2 screws back in, and turned breaker on.
Was this helpful?
Thank you for voting!
Oven bake element burned out (literally!)
0 of 1 people found this instruction helpful.
  • Robert from Dumfries, VA
  • Really Easy
  • Less than 15 mins
  • Socket set
Removed oven door & shelves. Removed the 2 mounting screws & compared parts to verify I ordered the right one, then plugged it right in! Managed to drop & lose one of the screws while re-installing them. Got a stainless sheet metal screw from the hardware store that fits, but will probably order an exact replacement because the size & thread are slightly different. All in all, other than losing the screw, it was a quick, easy task.
Was this helpful?
Thank you for voting!
Bake element was broken
0 of 1 people found this instruction helpful.
  • Shane from Roy, UT
  • Really Easy
  • Less than 15 mins
  • Nutdriver
Remove the oven racks, remove the two retaining screws, unplugged the wires. Install wires on new bake element, insert element into opening, install & tighten retaining screws, replace oven rack's & there you have it.
Was this helpful?
Thank you for voting!
Bake element set itself on fire and burned in half
0 of 1 people found this instruction helpful.
  • Cynthia from Okeana, OH
  • Really Easy
  • Less than 15 mins
  • Screw drivers
First - really check that the part you order will fit. Our oven is 30 years old and the first part we ordered was not correct, but it came the very next day after we ordered it which is amazing. We were more careful about measuring for the second one and it came almost as quickly. It only took a few seconds to unscrew the old element and then reattach the wires to the new one and screw it back into the oven. Very simple. I highly recommend PartSelect.
Was this helpful?
Thank you for voting!
All Instructions for the 10362
106 - 120 of 323