EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

1026 - Instructions

All Instructions for the 1026
1 - 4 of 4

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Leaked Water
15 of 25 people found this instruction helpful.
  • Jack from Soddy Daisy, TN
  • Easy
  • 15 - 30 mins
First I removed the old seal and comparied it with the new one and they were the same.
Then my wife put the new seal on. I helped her on the corners, very little. She did a very good job and it does not leak now.
Was this helpful?
Thank you for voting!
No Rinse cycle
3 of 5 people found this instruction helpful.
  • Tim from Forest Grove, OR
  • Easy
  • Less than 15 mins
  • Screw drivers
Removed the front panel below door, 4 screws. Removed 1 screw that help relay on frame. Moved 3 wires from old relay to new. Installed relay to frame, installed panel and done.
Was this helpful?
Thank you for voting!
No problems encountered
2 of 2 people found this instruction helpful.
  • Calvin from LOVINGTON, NM
  • Very Easy
  • 15 - 30 mins
There were 4 zip ties holding old silverware basket on to bottom rack snip them, remove basket install new basket with zip ties both ends 2 more in middle about 1-2” apart. Try to install ties about 1/2 way up on basket so it doesn’t get top heavy.
Was this helpful?
Thank you for voting!
All Instructions for the 1026
1 - 4 of 4