03021 - Parts

It is an OEM component which is designed for Briggs and Stratton engines that are commonly installed on a variety of lawn and garden equipment. The cap helps to secure the spring in the pump. Over time it may wear out, get damaged or lost eventually requiring a replacement. To ensure the exact location and the correct application of this ...Read morehardware, refer to the appropriate diagrams of your specific model. This high-quality cap-spring is made of durable metal and is sold as an individual component. You may need a screwdriver and a wrench set to perform this repair.

This is a metal star screw. It is a genuine OEM sourced part which is specifically designed for use with Briggs & Stratton engines and generators, and Toro snowthrowers, tillers, blower-vacuums, lawn tractors, and lawn mowers. This is available as an individual replacement part. A Torx screwdriver will be needed to replace this part if it becomes stripped or lost.

This is a genuine Briggs & Stratton and Toro part sourced directly from the manufacturer for use in engines, generators, and blower-vacuums. The pump diaphragm spring attaches to the spring cap and is made of metal. Keep in mind this high-quality part is sold individually. When replacing this part a screwdriver, wrench set, and a nutdrive...Read morer may all be needed. Over time this part may bend or break and will need to be replaced.

The stop switch is made of plastic and metal and helps to turn off the device. This is an authentic replacement part that is sourced from the original manufacturer for use with engines, generators, snowthrowers, and blower-vacuums made by Toro, Murray, and Briggs & Stratton. This part is available individually. During the installation pro...Read morecess, a wrench set and wire stripping pliers might be needed to replace this part. It may become bent or broken and will need to be replaced.

This replacement screw is a genuine hardware that is supplied directly from the original equipment manufacturer for use with Briggs and Stratton engines commonly installed on lawn and garden equipment. This part is made of high-quality metal and it is sold individually, you will need either a wrench or a flat-head screwdriver to install or remove it.

This is an authentic OEM component from Briggs & Stratton. The magneto armature screw is compatible with many lawn and garden engines. The hardened metal screw helps to mount the magneto armature. A wrench is required for the removal and installation. The magneto armature screw is sold individually. It is recommended to refer to engine manual and diagrams for further instruction.

The clutch ball allows the center part of the ratchet to turn backwards freely but catch when turned forward in your engine. This is an OEM part that is made of metal, and it is silver in color. This part will break due to fatigue and wear, and you will know if the part needs replacing if it is no longer able to swing outward to catch t...Read morehe outside of the clutch to start the engine. If this occurs, it is time to replace the clutch ball, which our customers found to be a challenging repair.

This is a genuine OEM sourced replacement part designed for use with generators. This assembly includes a plastic brush holder, two (2) carbon brushes with a lead wires and springs attached. Carbon brushes are a commonly replaced part on power tools. Due to normal use and friction brushes will gradually wear down and will require replace...Read morement. It is advised to replace both brushes at the same type. You would need a screwdriver to complete this job. • Make sure the unit is unplugged • First remove the cover and gain access to the brush assembly • Take our old brushes and replace them with the new ones • Reassembly the cover

This is an authentic Briggs & Stratton replacement part, sourced from the original manufacturer for use with small engines. The special air cleaner cover is commonly used to secure the air filter to the air cleaner base. This air cleaner cover is available as an individual replacement part, please see model diagram for associative parts.

This choke link is an OEM direct from Briggs & Stratton. The metal component is made for use with many small engines. The choke link is fastened between the choke thermostat and the carburetor. This item helps to manage the air flow in the carburetor when the engine is activated. A hex key and a pair of pliers are often needed for the repair. The choke is sold individually.

This is a Briggs & Stratton and Toro replacement part directly sourced from the manufacturer for use in engines, generators, tillers, blower-vacuums, and lawn mowers. The breather assembly is made of metal and helps to vent the air from the engine. It might require a socket set, a set of pliers, and a screwdriver to replace this part if i...Read moret becomes broken. The part is sold individually but also includes the gasket-breather.

It is a genuine OEM sourced replacement control cable which is commonly installed on garden tillers. This is is the cable that stops the blade when the control handle is released, if the cable is broken it will cause the brake to not release even when the lever is pressed. Make sure to refer to the appropriate diagrams of your model for t...Read morehe correct location and application of this component. Please note this high-quality rubber insulated cable is sold individually.