My Orders
01058-0 Briggs and Stratton Pressure Washer - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Muffler rusted out
7 of 18 people
found this instruction helpful.
-
Snoopy from TYRONE, GA
- Very Easy
- 30 - 60 mins
hand tightened with threads into threaded insert
Was this helpful?
Thank you for voting!
Had stripped thread had to rethread and install pump unloaded rebuild kit.
2 of 3 people
found this instruction helpful.
-
Leonard from SAGINAW, MI
- Very Difficult
- More than 2 hours
The reinstall was the hardest because the amount of tension with the spring. Had to cobble something together to hold spring tension until I got the new nut plug started. To bad you don’t give instructions and or tools to help with the actual install.
Was this helpful?
Thank you for voting!
Push mower leaked under neath.
1 person
found this instruction helpful.
-
Raymond from Coalport, PA
- Easy
- 15 - 30 mins
-
Pliers, Socket set
Pulled the old seal out, replaced it with seal #391483S and so far looking good !
Was this helpful?
Thank you for voting!