Microwave Grates
Find your part
Enter your model number or a part number and click "Search"Here is an example model number plate:
Popular Microwave Grates
Your Price
$57.87
Vent Grille - Black
PartSelect Number PS2361025
Manufacturer Part Number W10259625
This part mounts on the top of the microwave above the door.
Fixes these symptoms
- Door not closing properly
- See more...
Installation Instructions
Richard from San Antonio, TX
Mounting brackets are fragile and plastic support is easily broken
Replaced the intake grille. The grille should be removed prior to cleaning. The entire part is plastic and easily broken so that the two tabs for the mounting screws are shattered and will not hold the part in place. If one attempts to clean the grille using only a moderate amount of pressure with a cloth the fragile plastic will break. The part is poorly designed. When the vent is removed to replace the charcoal filter, one may discover that the grille has already been broken in a previous cleaning operation.
Read more...
Your Price
$45.14
Vent Grille - Black
PartSelect Number PS3507407
Manufacturer Part Number W10450187
This vent grille mounts on the top of the microwave above the door.
Installation Instructions
J Richard from Long Beach, MS
Broken grill
Adjusted clips inserted grill less then two minutes.It took me longer to unwrap the package then it took to install.Ordered part on line 10:45 am delivered 2:30 pm next afternoon.Less then 28 hours later. What service.
Read more...
Your Price
$52.04
Stainless Steel Vent Grill and Clips
PartSelect Number PS3507409
Manufacturer Part Number W10450189
This part is plastic with a stainless color finish and comes with the clips needed to mount the grill. The actual stainless steel option is no longer available.
Installation Instructions
John from Chicago, IL
vent grill fell off microwave and broke
ordered part from partselect, it showed up 3 days later, the part was easily replaced and the microwave looked like new. it couldn't have been easier....thanks.
Read more...
Your Price
$45.61
Vent Grille - Black
PartSelect Number PS391931
Manufacturer Part Number 8183851
The vent grille, used in microwaves, mounts on the top of the appliance and covers parts inside the microwave without blocking off airflow. Instead, the vent allows air to pass through the slats. If the vent is blocked or damaged, it is best to repair the vent grille. To repair, first remove the screw that holds the grill tabs with a Phillips screwdriver and clean the vent area. Next, install new grill into the appropriate tabs and make sure to secure the screws to prevent it from falling. Refer to the manual provided by the manufacture for installation instructions and accurate guidance. Remember to unplug appliance from power source.
Fixes these symptoms
- Door not closing properly
- See more...
Installation Instructions
Lawrence from Langhorne, PA
Replaced vent grill and grease filters
The repair was simple and easy. It required a Phillips head screw driver only. I Removed the vent grill and replaced it with the new grill there were only two screws that needed to be removed then refastened. Total five minutes. I also replaced the grease filters which took about a minute total time. I do many of my own repairs to my home and appliances .I've found your service parts delivery prompt and precise.
Read more...
Your Price
$45.61
Vent Grille
PartSelect Number PS392273
Manufacturer Part Number 8184608
The vent grille mounts to the top of the microwave, above the door. If you notice that your vent grille is damaged, or your door is not closing properly, you may need to replace the vent grille. This vent grille is black in color and is made of plastic. This part is approximately 30 inches in length, by 3.5 inches in height. This part is sold individually and can be used on stainless models. Many of our customers have rated this repair as easy. To complete the repair, simply unscrew the damaged vent grille, and screw on the replacement part.
Fixes these symptoms
- Door not closing properly
- See more...
Installation Instructions
Bobby from Shelley, ID
old vent grill broken
Removed to screws from oven to grill. removed grill. put in new grill and replaced the two screws.
Read more...
Your Price
$45.61
Vent Grille
PartSelect Number PS391973
Manufacturer Part Number 8183948
This white plastic vent grille mounts on the top of the microwave above the door, and covers components inside the microwave while allowing airflow through the slats. If the door on your microwave will not close properly, the vent grille could be at fault. If you notice that the vent grille is discolored, cracked, or broken, or if the mounting brackets on the grille are damaged or broken, you should replace the part. To replace the part, you will only need a Phillips head screw driver. Make sure this part is compatible with your microwave before ordering. This part does not include the screws used to mount it to your microwave.
Fixes these symptoms
- Door not closing properly
- See more...
Installation Instructions
Michael from Myrtle Beach, SC
Vent Grill was broken
I slid the new grill into position and secured it with the original two screws. Could not have been easier.
Read more...
Your Price
$103.11
Vent Grille - Stainless Steel
PartSelect Number PS2350382
Manufacturer Part Number W10245216
This is replacement vent grille for your microwave. You will find the grill vent either above or below the microwave door, depending on your model. If your microwave vent grill is discolored or cracked, or if the mounting brackets for the grill are broken, you may need to replace it. You will need a Phillips-head screwdriver to detach the vent grill from the microwave. This part is made of stainless steel and is approximately 30 inches wide and 4 inches tall. This product is sold individually.
Installation Instructions
Susan K from Lacey, WA
While attempting to get some from the cabinet above my microwave, a guest accidently pulled on the top grill vent and caused the plastic screw tap to crack and break leaving the grill vent hanging.
I first went back Lowe's where I purchased my microwave in the hopes they would help in the ordering of the grill vent for my mircrowave. They advised me that they do not order parts and gave me a card of a company to call to order the part. I called the number on the card and was left on hold for 20 minutes then instead of helping me with the part I needed they proceeded to set up an appointment for someone in my local area to come to my home, order the part the later install. I knew that it was just 2 screws and bottom snaps to install and I didn't want to wait a week for someone to come to my home. I then went direct to the Whirlpool web-site and found "Partselect.com". I was unable to match my model# even though my microwave was only 13 months old but knew it was probably interchangeable with another so I then called "Partselect.com" and was just amazed at how helpful and knowledgeable the gentleman on the other end was. He found my part and was very patient in describing it to me to assure that it was the correct one. I was on the phone less than 10 minutes with him. The part came in 3 days and was the correct part:) It took me less than 5 minutes to gently snap the 2 bottom tabs in and screw in the left and right tabs on top. Thank you so much "Partselect.com" for making what could have been a timely and expensive part replacement be so very simply and inexpensive.
Read more...
Your Price
$134.01
Vent Grille
Three scres and that was it! Less thatn 5 minutes to install.
I just find it questionable why so many of these vent covers have to be replaced.(I saw all of the reviews before I purchased the part. Sure seems like a lot of broken covers.) Why do they break so easily and why hasn't KitchenAide made them ar bit more durable. Read more...
PartSelect Number PS2355583
Manufacturer Part Number W10250593
This stainless vent grille mounts on the top of the microwave above the door.
Installation Instructions
G. Vann from Ft. Lauderdale, FL
Plastic part that held the screw in place broke...into many pieces
The repair was easy beyond my biggest imagination. It took longer to get the part of the box than it did to install it.Three scres and that was it! Less thatn 5 minutes to install.
I just find it questionable why so many of these vent covers have to be replaced.(I saw all of the reviews before I purchased the part. Sure seems like a lot of broken covers.) Why do they break so easily and why hasn't KitchenAide made them ar bit more durable. Read more...
Your Price
$165.65
Vent Grille - Stainless Steel
PartSelect Number PS4704150
Manufacturer Part Number WB07X11385
This vent grille mounts on the top of the microwave above the door.
Fixes these symptoms
- Door not closing properly
- See more...
Installation Instructions
RONALD from WESTLAKE VLG, CA
Plastic in vent grill deteriorated in six years causing vent grill to fall of microwave.
Removed vent grill and replaced with new product from PartSelect. Three screws attach vent grill to microwave housing. Very easy to do, but not satisfied with original parts on vent grill uses by General Electric. Microwave is above range model and vents to the outside.
Read more...
Your Price
$94.58
Vent Grille - White
PartSelect Number PS1021630
Manufacturer Part Number WB07X10968
This vent grille mounts on the top of the microwave above the door.NOTE*** Part is only available in white.
Installation Instructions
Kelly from Austn, TX
The door panel and grille vent are plastic and thay both cracked and fell apart due to cheap plastic parts from GE.
Removed the screws at the top of vent and took the vent off and then removed the door by lifting it off the hinge. I had to break the old plastic door frame to get it off, but since it was no good anyway it didnt matter. Then I put the glass in the new frame put the handle on it and snapped the frame on to the door and put it back on the door hinge and then put the new vent on and screwed it down and closed the door. Job was not to hard at all.
Read more...
