My Orders
Maytag Cooktop Ignitions
GET YOUR OFFICIAL Maytag PARTS TO ENSURE VICTORY
Popular Maytag Cooktop Ignitions
This part may differ in appearance, but functions same as original part. : This part sends enough current to the igniter to create a spark to the bottom of the burner cap.
This part may differ in appearance, but functions same as original part. : This part sends enough current to the igniter to create a spark to the bottom of the burner cap.
What this part fixes:
- Element will not heat
- Gas igniter glows, but will not light
- Will Not Start
Installation Instructions
jonathan from Bryson City, NC
No spark at top burners, first one then eventually all 4.
Most of the repair time was spent researching the problem online, locating the spark module inside the range, and selecting the part online. Installation was easy. Key troubleshooting info for me was, if there is no clicking, the spark unit is probably worn-out. I traced the ignition wires from the burners down to the spark module, locate
... Read more
d inside a 2x3" metal housing next to the bottom drawer. I removed 2 screws and out it came. The replacement unit pictured on the PartSelect site was not identical to the original but had the same number of contacts. I ordered the part and it arrived a few days later. The old connectors slipped easily onto the new pins, and I screwed the new unit into the range using the new metal housing. All 4 burners now spark up quickly, and we saved at least $100 on a service call. It was well worth the time and effort -- thanks!
Read less
This part sends enough current to the igniter to create a spark to the bottom of the burner cap.
This part sends enough current to the igniter to create a spark to the bottom of the burner cap.
What this part fixes:
- Element will not heat
- Gas igniter glows, but will not light
- Will Not Start
Installation Instructions
scott from centreville, VA
top burners on stove won't ignite ,no clicking noise
remove small panel on right side of stove,then un clip moduke and put wires from old module to new one.
Exact fit nomproblems.
Exact fit nomproblems.
Sold individually. This part sends enough current to the igniter to create a spark to the bottom of the burner cap.
Sold individually. This part sends enough current to the igniter to create a spark to the bottom of the burner cap.
Installation Instructions
John from Lewes, DE
No spark to large burner
Switched spark module from one of the other burners to see if it would work and it did (presto)process of elimination and being in the propane business for 32 years helped
This spark module is designed to ignite the gas burners on a range or cooktop, delivering a precise electric spark for reliable ignition. It restores proper functionality when burners fail to start, light inconsistently, or produce insufficient heat. Engineered for durability, this component ensures safe and efficient operation. Installation requires disconnecting power, removing the old module, and securing the new one using existing connections. A dependable solution for maintaining optimal performance in your gas range.
This spark module is designed to ignite the gas burners on a range or cooktop, delivering a precise electric spark for reliable ignition. It restores proper functionality when burners fail to start, light inconsistently, or produce insufficient heat. Engineered for durability, this component ensures safe and efficient operation. Installation requires disconnecting power, removing the old module, and securing the new one using existing connections. A dependable solution for maintaining optimal performance in your gas range.
This part sends enough current to the igniter to create a spark to the bottom of the burner cap.
This part sends enough current to the igniter to create a spark to the bottom of the burner cap.
Installation Instructions
Carolyn from Bellingham, MA
Top burners would not light. No "clicking" .
My husband and I replaced the igniter module, following directions we found online. We removed the old one, replaced it with the new one, and thankfully everything is working great!
MAKE THIS REPAIR A GUARANTEED WIN
OVER 2 MILLION PARTS TO ENSURE VICTORY
This is a 4-point re-ignition spark module. NOTE: This part has been redesigned by the manufacture, it may appear different but will still function the same.
This is a 4-point re-ignition spark module. NOTE: This part has been redesigned by the manufacture, it may appear different but will still function the same.
Installation Instructions
Robert from Ranchos de Taos, NM
Burners kept clicking after ignited
This problem was driving me crazy for months. Of course, after I bought and installed the part and it still was not fixed I finally found a website that told me how to fix the clicking. The problem is that the removable head burners (#8 on the top assembly diagram) are not making good electrical contact with the base burners (#22). What I
... Read more
did was grab the head burners and grind them back and forth into the base burners with the weight on the heal of my hand. Steel wool or sandpaper would work too--you just want to clean the surfaces to restore electrical contact.
If you still want to know how to replace the spark module start by removing #24. This will allow the removal of #9 (after you take the knobs off). You may have to do some fiddling cause the rubber gasket is sticky. Next there are 2 obvious regular screws for #14 and 2 not so obvious star screws in the space where the burner valves are. After #14 is off there are 2 screws on the spark module to be removed and one that you can't loosen that is in a slot. You wriggle the module out of that one.
If you still want to know how to replace the spark module start by removing #24. This will allow the removal of #9 (after you take the knobs off). You may have to do some fiddling cause the rubber gasket is sticky. Next there are 2 obvious regular screws for #14 and 2 not so obvious star screws in the space where the burner valves are. After #14 is off there are 2 screws on the spark module to be removed and one that you can't loosen that is in a slot. You wriggle the module out of that one.
Read less
The Spark Module WPW10110486 is a genuine OEM replacement part designed for Whirlpool gas ranges and compatible models from KitchenAid, Maytag, Amana, Jenn-Air, and Magic Chef. This module controls the ignition process for the surface burners by generating the electrical spark needed to ignite the gas. It features a terminal configuration of three 3/16" terminals and six 1/8" terminals. Common signs that this part may need replacement include burners that click without igniting, inconsistent sparking, or no spark at all. For installation, be sure to disconnect both the power and gas supply before beginning. The module should be mounted in the designated control area, with terminals connected according to the appliance’s wiring diagram. Always refer to your appliance’s service manual for model-specific guidance.
The Spark Module WPW10110486 is a genuine OEM replacement part designed for Whirlpool gas ranges and compatible models from KitchenAid, Maytag, Amana, Jenn-Air, and Magic Chef. This module controls the ignition process for the surface burners by generating the electrical spark needed to ignite the gas. It features a terminal configuration of three 3/16" terminals and six 1/8" terminals. Common signs that this part may need replacement include burners that click without igniting, inconsistent sparking, or no spark at all. For installation, be sure to disconnect both the power and gas supply before beginning. The module should be mounted in the designated control area, with terminals connected according to the appliance’s wiring diagram. Always refer to your appliance’s service manual for model-specific guidance.
