My Orders
Magic Chef Range Hinges
GET YOUR OFFICIAL Magic Chef PARTS TO ENSURE VICTORY
Popular Magic Chef Range Hinges
This passive oven door hinge is designed for use on either the left or right side of select ranges, ensuring smooth and controlled door movement. As a genuine OEM component, it helps restore proper door function by allowing the oven door to open and remain at a stable angle. The passive designation indicates that the spring mechanism is sold separately. Constructed for durability and precision, this hinge is compatible with a wide range of models across Whirlpool and affiliated brands. Replacement is recommended when the door no longer opens or closes smoothly. Before installation, consult your appliance’s service manual to confirm compatibility and follow safety procedures.
This passive oven door hinge is designed for use on either the left or right side of select ranges, ensuring smooth and controlled door movement. As a genuine OEM component, it helps restore proper door function by allowing the oven door to open and remain at a stable angle. The passive designation indicates that the spring mechanism is sold separately. Constructed for durability and precision, this hinge is compatible with a wide range of models across Whirlpool and affiliated brands. Replacement is recommended when the door no longer opens or closes smoothly. Before installation, consult your appliance’s service manual to confirm compatibility and follow safety procedures.
Used for white and black models.
Used for white and black models.
Sold individually.
Sold individually.
Sold individually.
Sold individually.
Installation Instructions
Patrick from MORAGA, CA
Two digits on the touch pad didn't work "9" & "0". Went to utube and they said hinges go bad causing heat to leak affecting touch pad
Pull range out 6 inches. Open door to 45 degrees and pull up to remove door. Remove both side plates, two screws each side. Remove both hinges by loosening two small bolts on the front of range that connect to the hinges. Place new hinges in place. Bolt hinges using bolts you removed, replace side panels. Slide door on hinges and push ba
... Read more
ck range.
Read less
MAKE THIS REPAIR A GUARANTEED WIN
OVER 2 MILLION PARTS TO ENSURE VICTORY
This door hinge kit is a genuine replacement part designed to support and guide the oven or range door, ensuring smooth opening, closing, and proper sealing. Typically sold as a set of two or more hinges, it helps prevent issues such as sagging, rubbing, or doors that fail to close correctly. Over time, hinges can wear out or become misaligned, affecting performance and heat retention. Replacing them restores the appliance’s functionality and efficiency. Installation involves removing the old hinges and securing the new ones for a precise fit.
This door hinge kit is a genuine replacement part designed to support and guide the oven or range door, ensuring smooth opening, closing, and proper sealing. Typically sold as a set of two or more hinges, it helps prevent issues such as sagging, rubbing, or doors that fail to close correctly. Over time, hinges can wear out or become misaligned, affecting performance and heat retention. Replacing them restores the appliance’s functionality and efficiency. Installation involves removing the old hinges and securing the new ones for a precise fit.
Installation Instructions
Ross A from Sugar City, ID
Oven door would not close completely
Open door 1/4 an slide the little latches on each hinge toward you. This will lock them in place. Close the door a little and lift it up. The door will slide out. Lay it face down on a table and undo all the screws. Do not remove the glass, frame etc. Slide old hinge out and new one in being careful not to slide the glass and frame out of
... Read more
alignment. It is a pain to get it all back together if you take every part out. Just do the hinges. Screw it back together. Reverse the door removal process by lowering the hinges into the oven receiver from a 75% closed position. Once in place, open the oven about halfway and slide the locks forward. This will allow the door to close completely. Note: Three hinges came with my set. Not sure what the third odd one is for.
Read less
This hinge can be used for either the left or the right side of the oven door. Sold individually.
This hinge can be used for either the left or the right side of the oven door. Sold individually.
Installation Instructions
Lar from Cary, NC
Oven Door hinge broke
0. Throw oven circuit breaker 1. Open oven door and slide/lift door off of hinge posts 2. Remove oven drawer 3. Slide oven out from between cabinets and turn so that the back is accessible. 4. remove Phillips screws holding the cover-rear and side panel to the stove. Note which screws have pan heads and which are hex head. 5. remove stov
... Read more
e elements and pans 6. Raise stove Top Assembly and release ceramic element sockets from their clips. 7. Push the supports for the Top Assembly fornt and back to release them from their sockets so that the Top Assembly can be lifted to near vertical. 8. Remove the hex head screw holding the Control Panel End Cap to the side panel. (Steps 5-7 might be avoided if you have a small socket wrench that can get to this screw without removing the elements.) 9. Remove the other screws holding the top of the side panel to the "Box Burner" pan that sits under the Top Assembly. 10. Pull side panel slightly away from the oven and lift it to disconnect it from the posts that hold the side panel to the front of the oven. 11. Remove the two screws on the front of the oven that hold the hing mechanism. 12. tilt and remove the hinge. 13. Open the replacement hinge so that it can fit through the hinge opening in the front of the oven. 14. Reassemble.
Read less
Each hinge is sold seperately.
Each hinge is sold seperately.
Installation Instructions
James from Elmont, NY
broken door hinge
unplug unit remove rear panel screws lift up stove top remove top two screws remove panel remove two hinge screws remove replace hinge and follow in reverse order
