Little Wonder Edger Parts

This Primer Bulb is a clear, plastic, individually sold part with an Outer Diameter of 0.720 inches (18.30 mm) and a Height of 0.674 inches (17.12 mm). With Flange: 0.842" (21.40 mm). This part is rated as Easy to install by customers, and attaches to the primer pump assembly. If the part shows signs of breakage, such as cracks appearing due to the bulb drying out, or fatigue, then it must be replaced. Refer to your owners manual/model number to ensure you are choosing the correct part.

This is a genuine ECHO/Shindaiwa replacement part It is compatible with over 150 machines listed below. The Fuel Line Grommet is placed into the fuel tank. The Vent tube, Fuel return line and fuel line are inserted through the three holes. A worn Fuel Line Grommet will cause fuel to leak from the tank. When replacing the Grommet it is advisable to replace the fuel lines at the the same time.

This a a genuine OEM replacement check valve for your small engine. It is also known as a fuel tank vent. You may need to replace this part if you are noticing debris or dirty oil in the reservoir. Make sure the engine is cool before you begin this repair, and remove the wire and boot from the spark plug to prevent the engine from starting up.

This tune-up kit is a genuine OEM replacement kit used in lawn and garden equipment. It is specially designed to provide you with everything you need to maintain your engine in one easy package. The kit includes one air filter, one spark plug, and one fuel filter. The air filter prevents contaminants in the air from flowing into the equipment engine. The fuel filter prevents contaminants from entering the fuel tank, and the spark plug is responsible for igniting the fuel and air mixture that allows the engine to run. It is normal for the filters to wear down or become clogged with debris over time while the spark plug can become fouled or damaged as well. If these parts are faulty, you will have difficulties starting your equipment, your engine may overheat and stall, and you will notice reduced power output from your equipment. It is recommended to replace these parts at the beginning of each season for optimal performance. Detach the air filter cover and clean the housing before placing the new air filter in place. Drain the fuel from the tank, disconnect the fuel lines, and replace the fuel filter. Finally, use a spark plug wrench to remove the faulty spark plug, and use a gaping tool to set the correct gap size on your new spark plug according to your model specifications. Thread the new spark plug in by hand and then tighten it with the wrench to complete your repair.

This genuine fuel clip is a silver, metal, individually sold part. It can be installed with pliers and is rated as Easy to install by customers. This part attaches to the fuel filter to secure the fuel line ot the fuel filter. If broken, likely due to fatigue, there may be a fuel leak. If damaged or missing, the part should be replaced. Refer to your owners manual or model number to ensure you are choosing the correct part.

Also referred to as a Spark Arrester, this Spark Arrester Screen is an authentic OEM replacement part that is not part of a kit or assembly. It is made of metal and sold individually. The purpose of this screen is to prevent flammable debris from entering the engine and becomes worn through regular use. If the screen is clogged, remove the screen from the muffler, hold it with pliers, and use a torch to burn off the debris before reinstalling the screen. This part needs to be replaced when it becomes damaged or worn. When the screen is malfunctioning, you may notice debris exiting through the muffler. To complete this repair, you will need a screwdriver and pliers. This screen is located within the muffler; refer to your owner's manual for the exact location on your model. Customers rated this repair as Easy.

This OEM nut is a 5mm, gold, metal nut, which is sold individually. It can be installed with a Wrench or Socket and Torque Wrench by torquing to the manufacturer specifications. This nut is used to secure another part in place, and should be replaced if damaged due to fatigue (such as damaged threads or rounded ends). This nut can have various uses on various equipment, and as such the difficulty of the installation can vary, but generally this is an easy repair.

This OEM maintenance kit can be installed in less than 5 minutes and contains all the necessary parts to get your engine running at peak performance. The air filter, fuel filter, and spark plug are all items that need to be inspected and replaced at least every 3 months or 90 hours. This kit includes: Fuel filter Air filter Spark plug

This oil seal is an OEM part that is used in trimmers, blowers, and edgers made by Shindaiwa and Echo. This item is a part of the small block assembly and is used to prevent oil leaks from between the crankshaft and the crankcase. The oil seal is priced individually, please note that two seals might be required.

This OEM metal washer is commonly used on a variety of different small engine/lawn equipment models and is sold individually. This washer is used to help evenly distribute pressure from the securing bolt or screw with the cylinder cover, to reduce any effects of vibration from the engine. If the connection between the securing fastener becomes loose, or if you are replacing the fastener itself, it is recommended that you replace this washer as well.