Kawasaki Small Engine Parts | Same Day Shipping | Millions of Parts
You are logged in as a customer LOG OUT

Hello!

You're visiting the PartSelect site in U.S.

Would you like to shop on the Canadian site?

Stay on this site
Go to Canadian site

Popular Kawasaki Small Engine Parts

Plug-Spark,Bpr4Es(Ngk),Solid – Part Number: BPR4ES
Your Price
$4.92
Plug-Spark,Bpr4Es(Ngk),Solid
PartSelect Number PS9314547
Manufacturer Part Number BPR4ES
Fixes these symptoms
No Symptoms for this part
Filter-Fuel – Part Number: 49019-0027
Your Price
$6.41
Filter-Fuel
PartSelect Number PS11835770
Manufacturer Part Number 49019-0027
This OEM Fuel Filter is a white, individually sold, plastic part, which measures 3 x 1.25 inches. It can be installed using pliers and is rated as Easy to install by customers (Tip: Make sure the fuel clip is secure when installing). This part is attached along the fuel line, between the fuel tank and carburator, and is used to filter contaminents out of the fuel. If broken fuel will leak, and it will smell. If clogged, there will be no fuel flowing out of it. If broken or clogged, it should be replaced. It should also be replaced during regular maintenance. Check your owners manual or model number to ensure you are selecting the right part.
Fixes these symptoms
No Symptoms for this part
Seal-Oil-So 8X14X5 Hs – Part Number: 92049-7019
Your Price
$3.08
Seal-Oil-So 8X14X5 Hs
PartSelect Number PS9157914
Manufacturer Part Number 92049-7019
This genuine oil seal is a brown, rubber part, measuring 8 x 14 x 5mm. This part can be installed using a screwdriver, wrench set, pliers, and pick, and a seal puller may also be required for maintenance. This repair is rated as "Easy" to install by customers. It attaches to the governer shaft to provide a tight seal, and if broken due to general wear or drying out, there will be visible oil coming out around the shaft. If damaged or missing, it should be replaced. Check your owners manual for the correct part number.
Fixes these symptoms
No Symptoms for this part
Bolt-Flanged,6X10 – Part Number: 130BA0610
Your Price
$3.08
Bolt-Flanged,6X10
PartSelect Number PS8861594
Manufacturer Part Number 130BA0610
Fixes these symptoms
No Symptoms for this part
O Ring-16mm – Part Number: 670D2016
Your Price
$3.08
O Ring-16mm
PartSelect Number PS9058832
Manufacturer Part Number 670D2016
Fixes these symptoms
No Symptoms for this part
Rod-Push – Part Number: 13116-2057
Your Price
$3.46
Rod-Push
PartSelect Number PS8860046
Manufacturer Part Number 13116-2057
This OEM Push Rod is a silver, metal part, approximately 5.5 inches long. It can be installed using a wrench or sockets. A Spark Plug Gap Tool may also be needed for maintenance. The installation of this partis rated as Medium difficulty by customers. It attaches inside the cylinder head, and is installed by tightening the rocker nut on top to manufacturer specs. This part opens and closes the intake and exhaust valves, and if broken there will be poor engine performance as well as an internal knocking or tapping sound from the engine. If damaged, likely due to fatigue or stress, it must be replaced. Refer to your owners manual or model number to ensure you are slecting the correct part.
Fixes these symptoms
No Symptoms for this part
Oil Seal, SD 35X62X8 – Part Number: 92049-7011
Your Price
$5.31
Oil Seal, SD 35X62X8
PartSelect Number PS9158704
Manufacturer Part Number 92049-7011
This manufacturer-approved Oil Seal, SD 35x62x8, is a Black, rubber, individually sold part with a 2 inch outer diameter. It can be installed with a wrench and screwdriver, and is rated as Easy to install by users. When installing, the housing must be clean and dry so use something that makes contact around the entire seal, such as a large socket or pipe, and tap into place evenly. This part attaches inside the crankcase around the crankshaft to provide a tight seal. If broken due to fatigue or drying out and cracking, there will be oil leaking from it, that you will be able to visually observe. If this happens, the part must be replaced. Refer to your owners manual or model number to ensure you are selecting the correct part. Note: this part may require a Seal Puller for maintenance.
Fixes these symptoms
No Symptoms for this part
Screen – Part Number: 14037-7008-9H
Your Price
$33.75
Screen
PartSelect Number PS8865096
Manufacturer Part Number 14037-7008-9H
Fixes these symptoms
No Symptoms for this part
Gasket-Chamber – Part Number: 11061-7009
Your Price
$4.11
Gasket-Chamber
PartSelect Number PS8840468
Manufacturer Part Number 11061-7009
The Chamber Gasket, also known as the Carburator Gasket, is a dark grayy, rubber part, certified by the original equipment manufacturer. It measures two inches, and is an individually sold part. It is installed using a wrench and screwdriver, and has been rated as Easy to install by customers. This part attaches to the carburator float chamber, and secures the chamber to the float inside the carburator. If broken, due to fatigue or drying out, there will be fuel leaking from the carburator. If broken, leaking, dryed out, or taken apart, the part should be replaced. Refer to your owners manual or model number to ensure you are choosing the correct part.
Fixes these symptoms
No Symptoms for this part
Plate – Part Number: 13270-7007
Your Price
$5.61
Plate
PartSelect Number PS9261938
Manufacturer Part Number 13270-7007
Fixes these symptoms
No Symptoms for this part