Dishwasher Racks | Replacement Parts & Accessories | PartSelect

Popular Dishwasher Racks

Your Price
$38.07
Rack Adjuster Kit - Left and Right Side
PartSelect Number PS10064063
Manufacturer Part Number W10712394
The rack adjuster connects to the dishrack and is used to change the height of the rack. This kit includes the parts to replace the left and right-side rack adjusters and has been upgraded to a more durable metal design. This kit includes 2 adjuster assemblies, 1 left-hand and 1 right-hand actuator cover, 2 gray adjuster covers, and 2 gray adjuster housings. The most common symptoms linked with faulty rack adjusters include: leaking, door latch failure, door not closing, dishes not cleaning properly, and failure to start the washing cycle. It is recommended to replace both the right and left side adjusters at the same time.
Fixes these symptoms
Door latch failure
Door won’t close
Leaking

See more...
Installation Instructions
Paul from Encinitas, CA says,

Replace rack adjusters - wheel were broken
Replacement was pretty easy after figuring out how to unsnap/unlock the old pieces. Tools only used to do a little prying and poking, but really aren't needed. Everything either snaps or slides toge...read more

Your Price
$63.08
Lower Dishrack Assembly
PartSelect Number PS8760885
Manufacturer Part Number 808602302
This white lower dish rack assembly comes with eight light-gray rollers for easy access. The dish rack is approximately 21 inches wide x 22 inches deep. The dish rack holds dishes in place during the dishwashing cycle. If you see rust spots on the dishes, the lower rack will not pull out, or the lower rack is visibly rusted or damaged, you will need to replace the part. Other common symptoms include: unusual or loud noises coming from the unit, or the dishes on the lower rack not being washed properly.
Fixes these symptoms
Not cleaning dishes properly


Installation Instructions
Lauren from Monmouth, IL says,

Rusty racks
It was amazing, the items were shipped within days of placing the order. They arrived ready for installation. My husband had the new racks in place in 10 minutes. He removed the wheels from the old...read more

Your Price
$54.21
Upper Dishrack with Wheels
PartSelect Number PS10062929
Manufacturer Part Number 5304498211
The upper dishrack, a vital part in a dishwasher, holds the dishes in place as the dishwasher goes through its cycle. If the wheels are missing/broken, the upper rack is damaged, or it starts to rust, replacing and installing a new dishrack could solve this problem. Customers rate this installation process as easy and no tools are required. Make sure to remove any items on the top rack before unhooking the tab of the rack stop on both ends and pulling it from the rail. Next step is to remove the upper spray nozzle and replace it with new one. Refer to the manual instructions for further guidance.
Fixes these symptoms
Not cleaning dishes properly


Installation Instructions
Lauren from Monmouth, IL says,

Rusty racks
It was amazing, the items were shipped within days of placing the order. They arrived ready for installation. My husband had the new racks in place in 10 minutes. He removed the wheels from the old...read more

Your Price
$54.04
Silverware Basket
PartSelect Number PS11746119
Manufacturer Part Number WP8531233
This silverware basket holds utensils in your dishwasher. If it becomes damaged or goes missing, you can replace it with this part. No disassembly is required to replace this part; simply remove the existing basket and replace it with the new one. To keep the basket in good shape, place silverware carefully inside, and be careful when removing and replacing the basket when unloading utensils.
Fixes these symptoms
Leaking
Not cleaning dishes properly


Installation Instructions
Stephanie from Huntington, IN says,

Silverware basket damaged.
Mine was an easy fix, lift out old and insert new. I just want to comment on the excellent service I received. I ordered on one day and my product arrived the next! Amazing! Thank you,PartSelect!...read more

Your Price
$10.05
Single Rack Roller Kit
PartSelect Number PS452448
Manufacturer Part Number 5300809640
The single rack roller kit comes with one axle/clip and one wheel/roller. The rack wheel is designed to allow the rack of your dishwasher to roll in and out. If the rack will not complete this task, or you notice that your dishwasher is not cleaning dishes properly, you may need to replace the rack wheel. The single rack roller kit is made of white plastic, and clips to the dishwasher rack with the included axle/clip. Many of our customers have described this repair as easy, and you will not require any tools to complete it.
Fixes these symptoms
Not cleaning dishes properly


Installation Instructions
CHRIS from ROANOKE, VA says,

Water leaking from Inlet Valve
Remove the bottom cover plate. Disconnect the water inlet and black rubber hose. Remove 2 mounting screws. Pull out electrical connector. Reverse order. Be sure to get the brass inlet connector r...read more

Your Price
$24.50
Silverware Basket
PartSelect Number PS959351
Manufacturer Part Number WD28X10128
This is a basket for washing flatware or silverware in your dishwasher.
Fixes these symptoms
Not cleaning dishes properly


Installation Instructions
Jack from PHOENIX, AZ says,

OLD ONE HAD HOLES IN IT AND SILVERWARE WAS SLIPPING THRUGH THE BASKET TO THE INTERIOR OF THE DISHWASHER
1. remove old basket. 2 Place new basket.. Done...read more

Your Price
$2.96
Tine Holder
PartSelect Number PS8712513
Manufacturer Part Number 00418498
This plastic holder is also known as a tine clip, or a rack flip tine clip. It is used in the lower rack of a dishwasher, it is part of the rack assembly that allows to convert your rack to better the dishes you need washed. When you select the position you want the tines to be in, this clip hold the tines in place. This clip is designed to hold two tine rows in place. This tine clip is simple to install, you do not need any tools, it simply snaps into place on the dishrack.
Fixes these symptoms
No Symptoms for this part
Installation Instructions
Tom from MACOMB, MI says,

Missing Tine Holders on upper/lower dish rack.
The old Tine holders used on the upper and lower dish rack dried up and cracked/broke. So I purchased new Tine holders for the upper and lower racks and snapped the new parts in place....read more

Your Price
$64.11
Lower Dishrack Assembly
PartSelect Number PS9494212
Manufacturer Part Number 808602402
This lower dishrack assembly comes with 8 rollers enabling it to roll in and out with ease. The dishrack is approximately 22 inches long x 20 inches wide. The dishrack holds dishes in place during the dishwashing cycle. If you see rust spots on the dishes, the lower rack will not pull out, or the lower rack is visibly rusted or damaged, the part should be replaced. Other common symptoms include: unusual or loud noises coming from the unit, or the dishes on the lower rack not being washed properly. This part is also known as a dish rack or a dishwasher rack.
Fixes these symptoms
No Symptoms for this part
Installation Instructions
Deb from MARIA STEIN, OH says,

Needed to replace some racks that were rusted and coming apart
All we had to do was remove the old racks and pop in the new. Very easy to do!...read more

Your Price
$22.99
Silverware Basket
PartSelect Number PS1481966
Manufacturer Part Number WD28X10209
This silverware basket has 7 pieces: 3 compartments, 3 covers and 1 handle. Gray in color.
Fixes these symptoms
Leaking
Not cleaning dishes properly


Installation Instructions
Carrie from Naples, FL says,

wheels were broken;basket was broken
This worked great. Cheap and easy....read more

Your Price
$159.63
Lower Dishrack with Wheels
PartSelect Number PS3486947
Manufacturer Part Number WD28X10284
This part includes the wheels.
Fixes these symptoms
Not cleaning dishes properly


Installation Instructions
michael from Bloomington, IN says,

lower dishrack rusted
replaced rack, no repairs required...read more