Dishwasher Fuses
Popular Dishwasher Fuses
Your Price
$34.51
In Stock
Dishwasher Bi-Metal Fuse
PartSelect Number PS2360984
Manufacturer Part Number W10258275
This part is used as a safety device to protect the dishwasher circuit from overload. If the temperature gets to high it will shut off the electrical current to the heating unit in the appliance. Also known as Thermal Fuse.
Fixes these symptoms
- Not draining
- Will Not Start
- See more...
Installation Instructions
Douglas from Dallas, GA
would not turn on
I did a search on the website and read the instructions for trouble shooting. I took the inside door off by taking the screws out. I pulled the part and tested it and found it did not in fact have no ampage. I then ordered the part on line. It came in two days, I plugged it in, put the door back together and the total time was about 15-20 minutes. Easy, simple, great instructions and the entire thing only costed me the part itself. It's working great now! And I've never worked on appliances before.
Read more...
Dishwasher Thermal Fuse
PartSelect Number PS4704481
Manufacturer Part Number W10402110
This is a replacement thermal fuse for your dishwasher. The thermal fuse is sometimes known as the thermal cutoff. The thermal fuse shuts off the dishwasher if the dishwasher shorts out or overheats. If your dishwasher is cutting out during the cycle, or will not start, you may have an issue with your thermal fuse. If your dishwasher control panel does not light up, the first thing you should check is the fuse. Before you begin to repair this part, be sure to disconnect the dishwasher from the power source, as you will be working around electricity.
Fixes these symptoms
- Will Not Start
- See more...
Installation Instructions
Robert from BOULDER, CO
Faulty door handle shorted out the fuse.
First electrical power to the dish washer was turned off. The top portion of front door panel was then opened up to expose pocket handle and latch assembly. Old latch assembly was replaced with new latch assembly and a new fuse. The door panel was then re-closed and electrical power turned on.
Read more...
Your Price
$35.41
In Stock
Dishwasher Fuse Kit
PartSelect Number PS774514
Manufacturer Part Number 8193762
When replacing these fuses the wire harness must be replaced as well. It is located in the control panel. The harness is included with this part now.
Fixes these symptoms
- Not draining
- Will Not Start
- See more...
Installation Instructions
tony from carrollton, TX
Controller board replacement
Simple task - remove the front door cover to expose the cover for the control panel which is then also removed. Be sure electricity is disconnected from the appliance, then simply remove the old control board (remove the quick-connect wire harness) and slide the replacement board back in. Reconnect wiring harness, replace cover and door panel, then turn-on electricy. NOTE - I suggest you shut off power at the breaker panel vs. disconnected the direct wiring at the appliance. The reason for this is because the new controller board could be damaged in the process of connecting the wires and any sparking that would take place when working with hot wiring.
Read more...
Your Price
$37.25
In Stock
Dishwasher Thermal Fuse and Harness
2. Remove the 2 screws that attach the door outer cover.
3. Remove the 8 screws that attache the door inner cover.
4. Remove the plastic cover over the electronic controller.
5. Remove the two connections to the thermal fuse.
6. Remove the thermal fuse.
7. Install the new thermal fuse.
Reverse the above steps. Read more...
PartSelect Number PS382828
Manufacturer Part Number 675813
*Please Note - When changing the fuse always use a new wiring harness.
Fixes these symptoms
- Not draining
- Will Not Start
- See more...
Installation Instructions
Jeff from Boaz, KY
Touch pad on dishwasher dead
1. Remove the two screws that attach the bottom cover. 2. Remove the 2 screws that attach the door outer cover.
3. Remove the 8 screws that attache the door inner cover.
4. Remove the plastic cover over the electronic controller.
5. Remove the two connections to the thermal fuse.
6. Remove the thermal fuse.
7. Install the new thermal fuse.
Reverse the above steps. Read more...
Dishwasher Fuse, Thermal
PartSelect Number PS11741258
Manufacturer Part Number WP3368928
This part is used as a safety device to protect the dishwasher circuit from overload. If the temperature gets to high it will shut off the electrical current to the heating unit in the appliance.
Fixes these symptoms
- Not drying dishes properly
- Will Not Start
- See more...