Craftsman Edger Parts
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Craftsman Edger Parts
Your Price
$15.27
In Stock
Craftsman Edger Fuel Line
PartSelect Number PS9008192
Manufacturer Part Number 530069599
This Fuel Line is a 25-inch, clear, plastic line used to deliver fuel. It requires a screwdriver, pliers, socket set, and nut driver and is rated as "Easy" to install by customers. If the fuel line wear out to the point of breaking, cracks and/or leaking will appear and the part should be replaced. Refer to your make, model and diagram to ensure this is the correct part for you.
Fixes these symptoms
- Will Not Start
- See more...
Installation Instructions
Steve from SALEM, OH
Broken fuel line
Removed broken fuel line from gas tank. Threaded new line into tank routed it to the carb and cut to length needed. Attached to the carb.
Read more...
Your Price
$34.40
In Stock
Craftsman Edger Fuel Tank Asm
PartSelect Number PS11812933
Manufacturer Part Number 753-06797
The fuel tank assembly is responsible for storing and supplying fuel to the engine in lawn and outdoor power equipment. It includes the tank, fuel cap, and fuel lines. The fuel tank assembly will fail if the tank develops cracks or leaks, or if the fuel lines can become clogged. When the fuel tank assembly fails, you will notice fuel leakage, restricted fuel supply, stalling, difficulties starting and overall lower performance. Before beginning any repairs, first drain any remaining fuel from the tank for your safety. Disconnect the fuel lines from the tank and remove the fuel tank from the equipment. Position the new tank on to the mounting holes and secure it in place. Connect the fuel lines to the engine and vent to complete your repair.
Fixes these symptoms
- Will Not Start
- See more...
Installation Instructions
Robert from ORANGE, CA
One of the two fuel lines cracked and leaking
Removed the 6 screws holding the red plastic cover, tank, and the old fuel lines from the carburetor. Placed the new tank in the sunlight for a few minutes to soften the new fuel lines. Then attached the new lines to the carburetor and replaced the cover
Read more...
Your Price
$32.55
In Stock
Craftsman Edger Lawn Mower Ground Drive Belt
PartSelect Number PS9172714
Manufacturer Part Number 954-04032B
This genuine drive belt is an original replacement part sourced directly from the manufacturer and is commonly used in Craftsman lawn mowers and edgers. Made from flexible rubber, it transfers power from the engine to the pulley that drives the cutting blades. Over time, the belt may become brittle or cracked due to wear and exposure, requiring replacement to maintain optimal performance. Measuring 3L x 35.80 inches, this belt is sold individually. A wrench may be needed for installation, depending on your equipment model.
Your Price
$12.20
In Stock
Craftsman Edger Blade
PartSelect Number PS9129938
Manufacturer Part Number 781-0080-0637
This Edger Blade is a black, metal blade which is sold individually and comes certified from the manufacturer. Installation is rated as "Easy" and requires a socket set and wrench set. This blade attaches to the drive shaft and is used for edging the grass around driveways and walkways. If this part becomes worn/fatigued/damaged (which may happen after hitting the pavement) you will notice an odd vibration and poor trimming, at which time the part should be replaced.
Your Price
$6.40
In Stock
Craftsman Edger Cultivator Air Filter
PartSelect Number PS9117898
Manufacturer Part Number 753-05996
This foam air filter in your lawn equipment serves as a protective barrier, preventing dirt, dust, and debris from entering the combustion chamber. Clean air is crucial for efficient fuel combustion. Typically located in the air intake system, a dirty, damaged, or torn air filter indicates the need for replacement. If you have trouble starting, reduced power, or rough operation, it may be due to a compromised air filter. To replace the air filter, unscrew the knob on the housing cover, swing it out, and remove the old filter. Consult the user guide for installation instructions. Before adding this to your cart, please be aware that this OEM replacement part is sold individually.
Your Price
$22.11
In Stock
Craftsman Edger Blade
PartSelect Number PS11925341
Manufacturer Part Number 243801-00
This is a genuine replacement Blade for the Black and Decker Edgers shown below. This is a new style Blade for these edgers. If this is the first time you have used this new Blade, you will need to order two of the part number 243797-00 Washers for this new Blade. Or you can order part number EB-007AL 7 1/2" Blade (Includes 2 Washers).
Your Price
$24.50
In Stock
Craftsman Edger Rod-adjust
PartSelect Number PS10007704
Manufacturer Part Number 747-04110A
This is a Manufacturer Approved replacement part designed for Trimmers/Edgers. This blade adjustment rod is made out of Metal and it is Sold Individually. Blade adjustment rod lets you adjust the position of the blade for bevel cutting. When replacing this Rod you will need Pliers, Socket set, Wrench Set.
Your Price
$18.24
In Stock
Craftsman Edger Sa Spool And Line Dual
PartSelect Number PS18988542
Manufacturer Part Number 90567225N
This is a genuine Black and Decker replacement part,it is sold individually. This is the part of the String Trimmer that contains the cutting line. This part includes the spool and cutting line for the models shown below. This is a dual line spool. The cutting line is .065 gauge. It is replaced by removing the spool cover and placing it inside the spool housing, then feed some line through the spool housing and replace the spool cap.
Your Price
$10.88
In Stock
Craftsman Edger Snow Blower Star Knob
PartSelect Number PS9109078
Manufacturer Part Number 720-04072A
This Star Knob, which may also be simply referred to as a Knob, is sourced directly from the manufacturer for use in lawn mowers and snow blowers. This part provides a quick-release for handles to fold down, and connect upper and lower handles. It is made of metal, is black, is not part of a kit or assembly, and is sold individually.
This part will need to be replaced if it has become cracked, worn, or damaged. The most common cause for this part needing to be replaced is worn or stripped threads no longer being able to grip. You will need a wrench or socket set and a torque wrench to complete this repair. It should be torqued to the manufacturer's recommendation.
Customers rate this repair as Easy.
Your Price
$7.01
In Stock
Craftsman Edger Blade
PartSelect Number PS16352908
Manufacturer Part Number 530095086
These Weed Eater Blades are 8-3/8 x 1-1/2 inch black, metal blades which come individually sold and attach to the output shaft. Installation requires a wrench set and socket set, and is rated as "Easy". This blade is used for edging the grass around walkways and driveways. If the blade hits pavement it may break, and you will notice a vibration or poor trimming, and the part must be replaced. Refer to your make model, and diagrams to ensure you're choosing the correct part.
Craftsman Edger Appliance Types
Related Craftsman Edger Parts
- Craftsman Edger Bearings
- Craftsman Edger Belts
- Craftsman Edger Blades
- Craftsman Edger Brackets and Flanges
- Craftsman Edger Brushes
- Craftsman Edger Carburetors
- Craftsman Edger Control Cables
- Craftsman Edger Deflectors and Chutes
- Craftsman Edger Dipsticks
- Craftsman Edger Drums and Tubs
- Craftsman Edger Engines
- Craftsman Edger Fans and Blowers
- Craftsman Edger Filters
- Craftsman Edger Gears
- Craftsman Edger Handles
- Craftsman Edger Hoses and Tubes
- Craftsman Edger Ignitions
- Craftsman Edger Knobs
- Craftsman Edger Manuals and Literature
- Craftsman Edger Motors
- Craftsman Edger Power Cords
- Craftsman Edger Pulleys
- Craftsman Edger Seals and Gaskets
- Craftsman Edger Spark Plugs
- Craftsman Edger Spindles
- Craftsman Edger Springs and Shock Absorbers
- Craftsman Edger Starters
- Craftsman Edger Switches
- Craftsman Edger Transmissions and Clutches
- Craftsman Edger Wheels and Rollers
- Craftsman Edger Wire Plugs and Connectors
Popular Craftsman Edger Models
Below are the most popular Craftsman Edger models we have. Enter your model number in the search box to find your model.
- 247762660 Walk-Behind Edger
- 247762660 Walk-Behind Edger
- 247762660 Edger
- 247762660 Walk-Behind Edger
- 316773800 Lawn Edger
- 316773800 Edger
- 536772341 Edger
- 29270 Cultivator Edger
- E410 Edger
- E410 Edger
- CMEED400 Cm Ac Edger
- SE2200 Edger
- CMXGKAME2979 Edger
- CMXGKAME2979 Edger
- CMXGKAME2979 Lawn Edger
- 316772370 Lawn Edger
- 316772370 Edger
- 536796537 Edger
- 536797400 Edger
- 247772460 Edger