Compressor Valves

Frequently referred to as a Drain Plug, this Drain Valve is used to drain any condensation that has collected inside the tank to prevent the tank from rusting. It is not part of a kit or assembly, is sold individually, made of brass, is gold, and will be found at the bottom of the air tank. This part will need to be replaced when it is no longer able to provide a proper seal, or if it is visibly worn or damaged. You will need a wrench to complete this repair. Customers rate this repair as Easy.

This air compressor regulator repair kit restores proper pressure control and airflow by replacing worn internal components such as seals and the piston. Designed to address leaks or inconsistent pressure, it helps return the regulator to reliable working condition. Replacing damaged parts with this kit can improve performance and ensure consistent operation.

Genuine Porter Cable replacement part, this item is sold individually. Head Gasket Sold Separately. This part is used in the all of the compressors models listed below. When air is pumped by the piston it passes through the Valve Plate into the compressor tank. There are reeds on the valve plate that will eventually wear out, and the Valve plate will need to be replace. It is advisable at this time to replace the Graphite Gasket Kit, part number D30139.

This is a genuine Campbell Hausfeld replacement part designed for use with air compressors. It is used to regulate the air pressure in the compressor tank. It is also used to regulate the air pressure of the air exiting the tank. In some instances you will need to lower or higher the air pressure of the tank and the air coming from the tank. It is made out of metal with a plastic knob. This regulator is sold individually. To complete this repair you would need a set of wrenches.

Sourced directly from the manufacturer, this part is an exact replacement for various air compressors. Its primary purpose is to control the airflow through the pump. This part is an assembly that includes the plate gasket and seals. When this part is malfunctioning, the tank will take longer to fill or will not be able to fill at all. It will need to be replaced once it becomes damaged or worn. You will need a wrench set and a socket set to complete this repair. Customers rated this repair as Easy.

This drain valve is an OEM direct from Rolair. Compatible with electric and gas compressors, the metal part is fitted at the base of the tank. This item allows the operator to drain the tank following each extended use. Regularly draining the tank prevents rust and leakage. The drain valve is sold individually. A wrench set may be necessary for the proper removal and installation.

This is a genuine Campbell Hausfeld replacement drain valve, sold individually. When using an air compressor, moisture naturally condenses inside the tank. If this water is left sitting for too long, it can lead to internal rust and damage. The drain valve allows you to release this built-up moisture easily. It's especially important to drain your tank after each use—particularly if you tend to leave air in the tank for extended periods. Regular draining helps extend the life of your compressor and maintain its performance. Be sure to open the valve regularly to prevent water buildup and potential tank corrosion.

This check valve is used to direct air from the cylinder to the tank, and to prevent air from going back into the pump. It is a genuine OEM part used on air compressors. It features threaded fittings to attach it to the tank, pump, and pressure switch. A faulty check valve can cause the pump to restart even with a full tank, that in turn can overload the motor. This brass part is sold individually, and the tubes are sold separately. Always make sure to drain the tank before beginning the repair.

The Husky regulator manifold body is part of a large line of genuine replacement parts. This regulator manifold body is constructed with heavy duty aluminum. It accommodates tank and regulated gauges.

Pilot Unloader Valve - 1/4" Tube, Pilot 1/4" M NPT