Craftsman Compressor Valves

Craftsman Compressor Drain Valve

★★★★★

★★★★★

1 Review

Frequently referred to as a Drain Plug, this Drain Valve is used to drain any condensation that has collected inside the tank to prevent the tank from rusting. It is not part of a kit or assembly, is sold individually, made of brass, is gold, and will be found at the bottom of the air tank. This part will need to be replaced when it is no longer able to provide a proper seal, or if it is visibly worn or damaged. You will need a wrench to complete this repair. Customers rate this repair as Easy.

Craftsman Compressor Regulator Repair Kit

★★★★★

★★★★★

1 Review

This is a genuine OEM replacement part, it is sold as a individual kit. The purpose of the N008792 Regulator Repair Kit is to repair the regulator on the models shown below. Over time the internal parts of the regulator will become worn and have to be replaced. This is a huge feature on these compressors, inasmuch as on other compressors you have to replace the complete manifold assembly. It also includes instructions on how to install it.

Craftsman Compressor Valve Plate Assy Genuine Porter Cable replacement part, this item is sold individually. Head Gasket Sold Separately. This part is used in the all of the compressors models listed below. When air is pumped by the piston it passes through the Valve Plate into the compressor tank. There are reeds on the valve plate that will eventually wear out, and the Valve plate will need to be replace. It is advisable at this time to replace the Graphite Gasket Kit, part number D30139.

Craftsman Compressor Valve Check 1/2npt X This check valve is used to direct air from the cylinder to the tank, and to prevent air from going back into the pump. It is a genuine OEM part used on air compressors. It features threaded fittings to attach it to the tank, pump, and pressure switch. A faulty check valve can cause the pump to restart even with a full tank, that in turn can overload the motor. This brass part is sold individually, and the tubes are sold separately. Always make sure to drain the tank before beginning the repair.

Craftsman Compressor Valve Check 1/2npt X This is an OEM Authorized part designed for Air Compressors. It is a metal Valve which is sold Individually. Check valve lets pressurized air flow into the tank and prevents air from flowing back into the pump. When replacing this part make sure to unplug the air compressor and release the air from the tank.

Craftsman Compressor Regulator, 3 Port 1/4 Npt

★★★★★

★★★★★

5 Reviews

This is an original Craftsman replacement part manufactured for use with air compressors. The regulator is used to adjust the amount of pressure in the tank. This regulator is sold as an individual replacement part.

Craftsman Compressor Valve Safety This is an authentic part that is intended to be used with air compressors from Porter Cable, Black & Decker, and Bostitch. This safety valve attaches to the switch box or the manifold, and is used to release air from the tank if the pressure becomes too high inside the tank. If the safety valve goes off it will need to be replaced, because it can not be reused. The safety valve is sold individually.

Craftsman Compressor Valve This safety valve is a genuine replacement part manufactured for use with air compressors. If the compressor's pressure switch malfunctions, and does not turn the motor off when the amount of pressure is met, the safety valve will open to release the extra air pressure. The amount of pressure required to open the safety valve is set by tension of the spring inside the valve. The spring can wear out, and leave the valve open at a lower pressure than what is set to turn the switch off, and will not allow pressure to build inside the tank. This safety valve has a thread sealant pre-applied, so additional thread sealant is not required, the safety valve is sold individually.

Craftsman Compressor Regulator 3port P2 L This replacement regulator is a high quality item that is supplied from original equipment manufacturer for use with air compressors. It allows user to adjust the pressure of the air coming from the tank to the desired level. Make sure to unplug the air compressor release all the air from the tank before installing this part. Please note one durable metal three port regulator with a plastic knob is included per order.

Craftsman Compressor Assy Regulator This is a genuine manufacturer supplied pressure regulator for Porter Cable Air Compressors. This part adjusts the pressure of the air coming from the tank to the desired level. Includes Regulator Body, Two (2) Brass Quick Connect Fittings, One (1) Elbow Fitting, And a Regulator Knob. Make sure to unplug the air compressor release all the air from the tank before installing this part.