Ariens Edger Parts

Why Genuine OEM Matters

Shop By Appliance Type Shop By Part Type

Popular Ariens Edger Parts

Blade- Edger-9-inch – Part Number: 03789800

Your Price

$22.44

Ariens Edger Blade- Edger-9-inch

PartSelect Number PS8790566

Manufacturer Part Number 03789800

This edger blade is a genuine OEM sourced replacement part that is designed for use with Ariens lawn edgers. It is used for edging level ground around sidewalks and driveways. This blade is made from strong durable metal and it is sold individually, to replace it you will need a wrench to remove and secure the blade nut.

Installation Instructions

Jimmy from Dickinson, TX

9" EDGER BLADE HAS WORN DOWN TO ABOUT 8"

Start by disconnecting spark plug wire. Using a 3/4" boxed end wrench to back up the edger blade shaft on the side opposite the blade, use a 1/2" ratchet with a 3/4" socket to remove the nut holding the blade on. It should be tight, and comes off by turning to the left. May need a small piece of 2 X 4 to go between the end of box wrench and your driveway to lock in place. Remove old blade and install new. As there is not a slot or key to hold the blade in place, tighten nut as tight as you can in order to hold the blade on the shaft. Replace spark plug wire and job is complete. Read more...

Wheel- 8.0x1.75x.50 - Ball Brg – Part Number: 07100823

Your Price

$38.33

Ariens Edger Wheel- 8.0x1.75x.50 - Ball Brg

PartSelect Number PS8802935

Manufacturer Part Number 07100823

This is an authentic replacement part, sourced from the original manufacturer for use with Ariens riding lawnmowers. The special wheel is used to provide mobility of the lawnmower. This wheel is a complete part assembly and the wheel is available as an individual replacement part.

Your Price

$62.32

Ariens Edger Guard-blade

★★★★★

1 Review

PartSelect Number PS9250474

Manufacturer Part Number 03779559

This is a genuine Ariens replacement part that has been sourced from the original manufacturer to be used with lawn edgers. The metal blade guard attaches to the spindle bracket and is used to limit debris that is kicked up by the blade. The guard is available as an individual replacement part.

V-belt- 4l-wrapped – Part Number: 07200507

Your Price

$39.15

Ariens Edger V-belt- 4l-wrapped

PartSelect Number PS8802503

Manufacturer Part Number 07200507

This is an authentic Ariens replacement part that has been sourced from the original manufacturer to be used with lawn edgers. The v-belt is used to link the motor pulley and the blade pulley to drive the cutter. This item is available as an individual replacement part, please see illustrated diagram for associative parts.

Bkt-lh Wheel Support – Part Number: 03780451

Your Price

$56.64

Ariens Edger Bkt-lh Wheel Support

PartSelect Number PS8791473

Manufacturer Part Number 03780451

Blt-hex .25-20x2.50 Gr5 Zcc – Part Number: 05961600

Your Price

$6.40

Ariens Edger Blt-hex .25-20x2.50 Gr5 Zcc

PartSelect Number PS8799306

Manufacturer Part Number 05961600

Spark Plug-sp-170 – Part Number: 20020001

Your Price

$21.02

Ariens Edger Spark Plug-sp-170

PartSelect Number PS8910200

Manufacturer Part Number 20020001

This spark plug is an OEM direct from the Ariens manufacturer. Composed of metal and porcelain, this item is compatible with many log splitter machines. The spark plug delivers an electric current to the splitter's engine, igniting the fuel and air mixture. Please note, this item is sold individually. A spark plug wrench or a socket wrench is needed to complete this repair.