My Orders
Ariens Edger Blades
GET YOUR OFFICIAL Ariens PARTS TO ENSURE VICTORY
Popular Ariens Edger Blades
This edger blade is a genuine OEM sourced replacement part that is designed for use with Ariens lawn edgers. It is used for edging level ground around sidewalks and driveways. This blade is made from strong durable metal and it is sold individually, to replace it you will need a wrench to remove and secure the blade nut.
This edger blade is a genuine OEM sourced replacement part that is designed for use with Ariens lawn edgers. It is used for edging level ground around sidewalks and driveways. This blade is made from strong durable metal and it is sold individually, to replace it you will need a wrench to remove and secure the blade nut.
Installation Instructions
Jimmy from Dickinson, TX
9" EDGER BLADE HAS WORN DOWN TO ABOUT 8"
Start by disconnecting spark plug wire. Using a 3/4" boxed end wrench to back up the edger blade shaft on the side opposite the blade, use a 1/2" ratchet with a 3/4" socket to remove the nut holding the blade on. It should be tight, and comes off by turning to the left. May need a small piece of 2 X 4 to go between the end of box wrenc
... Read more
h and your driveway to lock in place. Remove old blade and install new. As there is not a slot or key to hold the blade in place, tighten nut as tight as you can in order to hold the blade on the shaft. Replace spark plug wire and job is complete.
Read less
This is a genuine Ariens replacement part that has been sourced from the original manufacturer to be used with lawn edgers. The metal blade guard attaches to the spindle bracket and is used to limit debris that is kicked up by the blade. The guard is available as an individual replacement part.
This is a genuine Ariens replacement part that has been sourced from the original manufacturer to be used with lawn edgers. The metal blade guard attaches to the spindle bracket and is used to limit debris that is kicked up by the blade. The guard is available as an individual replacement part.