My Orders
Admiral Range Switches
GET YOUR OFFICIAL Admiral PARTS TO ENSURE VICTORY
Popular Admiral Range Switches
This infinite switch is for 8-inch range burners. When an element is unable to produce any heat on a modern oven, the problem may lie with the infinite switch. This switch is responsible for sending power to the surface elements. Check the element and terminal block to ensure they are working properly. If they are in working order, check the infinite switch at the control panel for any wires that have overheated, or broken terminals to or from the infinite switch. If the infinite switch is damaged or malfunctioning, it will need to be replaced. Remember to unplug your range before beginning this repair.
This infinite switch is for 8-inch range burners. When an element is unable to produce any heat on a modern oven, the problem may lie with the infinite switch. This switch is responsible for sending power to the surface elements. Check the element and terminal block to ensure they are working properly. If they are in working order, check the infinite switch at the control panel for any wires that have overheated, or broken terminals to or from the infinite switch. If the infinite switch is damaged or malfunctioning, it will need to be replaced. Remember to unplug your range before beginning this repair.
Installation Instructions
JACK from FRANKLINVILLE, NJ
Burner switch would not regulate heat
Turn off breaker in electric panel fore stove. Put screw driver into slots in front of glass top surface. Pry top up carefully until top pops up.Remove burner dial, remove two philips head screws holding switch. Lift top carefully and prop up.With new switch close remove wires from old switch one at a time and place on new switch. Place n
... Read more
ew switch back in place, securing with philips screws. Remove prop and carefully press top down until it snappes into place.Replace dial, turn breaker back on and try burner.
Read less
This dual surface element control switch is a genuine OEM replacement part designed to fit select models of stoves, ovens, and ranges. The control switch is an essential component that allows you to turn the surface element on and off, as well as regulate the amount of heat the element produces. If your stove’s surface element isn’t heating properly, fluctuates in temperature, or won’t turn off, replacing the control switch can restore full functionality. Before installation, ensure the range is unplugged, or disconnect the power at the house circuit breaker to avoid electrical hazards. The surface element control switch is usually located behind the stove’s front control panel. To install, remove the panel and disconnect the old switch from the wiring harness. Install the new switch by securing it in place and reconnecting the wiring to match the original configuration. After installation, turn the power back on and test the surface element to verify it operates correctly.
This dual surface element control switch is a genuine OEM replacement part designed to fit select models of stoves, ovens, and ranges. The control switch is an essential component that allows you to turn the surface element on and off, as well as regulate the amount of heat the element produces. If your stove’s surface element isn’t heating properly, fluctuates in temperature, or won’t turn off, replacing the control switch can restore full functionality. Before installation, ensure the range is unplugged, or disconnect the power at the house circuit breaker to avoid electrical hazards. The surface element control switch is usually located behind the stove’s front control panel. To install, remove the panel and disconnect the old switch from the wiring harness. Install the new switch by securing it in place and reconnecting the wiring to match the original configuration. After installation, turn the power back on and test the surface element to verify it operates correctly.
Installation Instructions
Vanessa from Castleberry, AL
The right front dual burner went to high no matter the setting
I located the model number. Then searched the problem on YouTube. I saw that it was most likely the infinite switch and was an easy fix, so I ordered the part from this site and replaced it following the directions on the video. It's now as good as new!
Does your appliance need a quick fix? Our GE Controller Assembly is here to help. This genuine GE part is the heartbeat of your appliance, keeping everything running smoothly and efficiently. It's specifically designed to fit your GE appliances perfectly, meaning you won't have to worry about any compatibility issues. This precision-crafted part doesn?t just improve appliance performance - it enhances its life and reliability too. The GE Controller Assembly is made with sustainability in mind, promising durability that makes for a lasting solution to your appliance woes. When you choose to repair your appliance with this GE part, you're choosing superior results and reliability. It's a simple, effective way to restore your appliance to its former glory. So why wait? Lay your worries to rest and boost your appliance's efficacy with the GE Controller Assembly.
Does your appliance need a quick fix? Our GE Controller Assembly is here to help. This genuine GE part is the heartbeat of your appliance, keeping everything running smoothly and efficiently. It's specifically designed to fit your GE appliances perfectly, meaning you won't have to worry about any compatibility issues. This precision-crafted part doesn?t just improve appliance performance - it enhances its life and reliability too. The GE Controller Assembly is made with sustainability in mind, promising durability that makes for a lasting solution to your appliance woes. When you choose to repair your appliance with this GE part, you're choosing superior results and reliability. It's a simple, effective way to restore your appliance to its former glory. So why wait? Lay your worries to rest and boost your appliance's efficacy with the GE Controller Assembly.
Installation Instructions
Robert from Monroe, NJ
Burners were intermittently working.
It turns out that the 6" and 8" burners we actually broken and the infinite switch for the 8" burner was not working properly. These we very simple replacements. You just need to note the numbers on the original burners to make sure that you use the same numbers on the bottom of the burners so that they install in the same slots. The
... Read more
wires on the infinite switch match and this takes less than 5 minutes to remove the back of the stove top and the front switch handle. Simple replace the infinite switch and the burners and whoowhooo ,,.... the fix is done.
Read less
This surface element switch controls how much heat an electric burner makes. It turns power on and off in cycles as the knob moves from low to high. A burner that stays on high, will not heat, or heats at the wrong level may have a bad switch. Before replacing it, inspect the burner, wire ends, control knob, and nearby parts. Confirm fit with the full appliance model, terminal layout, and 15-amp, 240-volt rating. Turn off the breaker and verify that power is off. Move each wire one at a time before testing.
This surface element switch controls how much heat an electric burner makes. It turns power on and off in cycles as the knob moves from low to high. A burner that stays on high, will not heat, or heats at the wrong level may have a bad switch. Before replacing it, inspect the burner, wire ends, control knob, and nearby parts. Confirm fit with the full appliance model, terminal layout, and 15-amp, 240-volt rating. Turn off the breaker and verify that power is off. Move each wire one at a time before testing.
Installation Instructions
Albert from VALLEY MILLS, TX
Switch to the left front burner not working right.
Repair has not been made yet still waiting for the part. The part is on order and was told it would be shipped in 1/3 business days. Still waiting for the part to come from China. This is the problem with parts being made out side the U. S. A.
MAKE THIS REPAIR A GUARANTEED WIN
OVER 2 MILLION PARTS TO ENSURE VICTORY
This part has been updated by the manufacturer. This updated part now has 7 wire terminals instead of 5. The terminals are all labeled, however, the new switch needs to be tested before connecting the pilot lamp wire (P). To test the new switch:
1) Connect the Line Wires (L1 and L2), connect the Load Wires (H1 and H2).
2) Do not connect the pilot lamp (P) wire yet.
3) Reconnect the power to the range and turn on the new switch and one other switch.
4) Connect the leads of a volt meter on L1 of the new switch and P of the other switch you turned on.
5) If the volt meter reads 220V, the L1 and L2 wires on the new switch must be reveresed.
6) Disconnect power, reverse Line Wires if needed and connect the P wire.
7) Reconnect power to the range after reassembly.
This part has been updated by the manufacturer. This updated part now has 7 wire terminals instead of 5. The terminals are all labeled, however, the new switch needs to be tested before connecting the pilot lamp wire (P). To test the new switch:
1) Connect the Line Wires (L1 and L2), connect the Load Wires (H1 and H2).
2) Do not connect the pilot lamp (P) wire yet.
3) Reconnect the power to the range and turn on the new switch and one other switch.
4) Connect the leads of a volt meter on L1 of the new switch and P of the other switch you turned on.
5) If the volt meter reads 220V, the L1 and L2 wires on the new switch must be reveresed.
6) Disconnect power, reverse Line Wires if needed and connect the P wire.
7) Reconnect power to the range after reassembly.
Installation Instructions
Robert from Medina, OH
The old switch would not regulate the temperature - running too hot
flipped off breaker
Pulled the stove from the wall about 2 feet
Removed back cover (4 screws)
looked at existing switch - it was different than the new switch, but the instructions were spot on for the retrofit
I marked the back of the new switch with the retrofit locations of the wires
pulled off the knob
re ... Read more moved 2 screws from the front of the range that holds the switch
removed old wires using needle nose pliers
attached new switch re-using same 2 screws from the front
one at a time attached the wires to their proper location
pushed knob back on
reset the breaker
tested the new switch - all was OK
switched off breaker again
replaced the back cover
slid range back in place
Breaker back on
finished
Pulled the stove from the wall about 2 feet
Removed back cover (4 screws)
looked at existing switch - it was different than the new switch, but the instructions were spot on for the retrofit
I marked the back of the new switch with the retrofit locations of the wires
pulled off the knob
re ... Read more moved 2 screws from the front of the range that holds the switch
removed old wires using needle nose pliers
attached new switch re-using same 2 screws from the front
one at a time attached the wires to their proper location
pushed knob back on
reset the breaker
tested the new switch - all was OK
switched off breaker again
replaced the back cover
slid range back in place
Breaker back on
finished
Read less
Introducing the Infinite Switch Surface Element Control Switch, a genuine OEM part that remarkably enhances the performance of your Whirlpool appliance. Praised for its dependable function, it operates to turn your surface element on and off, deftly controlling the heat it produces. This versatile part is designed for ranges and contributes to a rich cooking experience. Informational tip: before installation, ensure your range is unplugged or your house circuit breaker is off to ensure a safe and efficient setup. Do remember to wear work gloves for your protection during this procedure. Turn to this part to revitalize the operation of your Whirlpool range.
Introducing the Infinite Switch Surface Element Control Switch, a genuine OEM part that remarkably enhances the performance of your Whirlpool appliance. Praised for its dependable function, it operates to turn your surface element on and off, deftly controlling the heat it produces. This versatile part is designed for ranges and contributes to a rich cooking experience. Informational tip: before installation, ensure your range is unplugged or your house circuit breaker is off to ensure a safe and efficient setup. Do remember to wear work gloves for your protection during this procedure. Turn to this part to revitalize the operation of your Whirlpool range.
This surface element infinite switch controls the heat output of an electric cooktop burner by cycling power on and off to maintain the temperature you select, allowing smooth adjustment from a low simmer to a full boil. Commonly used for the left-rear burner position, it operates on 240 volts and helps ensure consistent, reliable heating performance. Replacing a worn switch can resolve issues such as a burner that won’t heat, heats only partially, fluctuates between hot and cold, stays stuck at one temperature, or shows signs of electrical damage such as burnt contacts, sparking, or buzzing. Installation normally involves disconnecting the appliance from power, accessing the control panel, and transferring the burner’s wiring to the new switch.
This surface element infinite switch controls the heat output of an electric cooktop burner by cycling power on and off to maintain the temperature you select, allowing smooth adjustment from a low simmer to a full boil. Commonly used for the left-rear burner position, it operates on 240 volts and helps ensure consistent, reliable heating performance. Replacing a worn switch can resolve issues such as a burner that won’t heat, heats only partially, fluctuates between hot and cold, stays stuck at one temperature, or shows signs of electrical damage such as burnt contacts, sparking, or buzzing. Installation normally involves disconnecting the appliance from power, accessing the control panel, and transferring the burner’s wiring to the new switch.
This surface element control switch is a key component in select ranges, responsible for managing the operation of the cooktop heating elements. Also known as an infinite switch or indicator switch, it allows users to turn the element on and off and adjust the heat level with precision. The switch communicates selected settings to the appliance’s control board, regulating power flow to ensure accurate temperature control. This OEM part is designed for reliable performance and compatibility with various models. Installation should be performed with the appliance unplugged and protective gloves worn to ensure safety.
This surface element control switch is a key component in select ranges, responsible for managing the operation of the cooktop heating elements. Also known as an infinite switch or indicator switch, it allows users to turn the element on and off and adjust the heat level with precision. The switch communicates selected settings to the appliance’s control board, regulating power flow to ensure accurate temperature control. This OEM part is designed for reliable performance and compatibility with various models. Installation should be performed with the appliance unplugged and protective gloves worn to ensure safety.