EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

Admiral Range Trim

Popular Admiral Range Trim

NOTE: The trim has been re-designed and no longer requires the screws. The dimples on the bottom hold them in place instead.
NOTE: The trim has been re-designed and no longer requires the screws. The dimples on the bottom hold them in place instead.
Installation Instructions
William from HADLEY, PA
Broken Trim Pieces
Remove vent trim from oven and set oven glass to the side. Next remove handle from vent trim (two screws). Next place handle on new vent trim. Place glass in place, (it is held in place by bottom of oven door and vent trim). next place side trim in place and place that side of the vent trim and loosely tighten screw holding trim into place at top of the glass. Next place the other trim into place under the vent trim and tighten the screws on both sides.
NOTE: The trim has been re-designed and no longer requires the screws. The dimples on the bottom hold them in place instead.
NOTE: The trim has been re-designed and no longer requires the screws. The dimples on the bottom hold them in place instead.
Installation Instructions
William from HADLEY, PA
Broken Trim Pieces
Remove vent trim from oven and set oven glass to the side. Next remove handle from vent trim (two screws). Next place handle on new vent trim. Place glass in place, (it is held in place by bottom of oven door and vent trim). next place side trim in place and place that side of the vent trim and loosely tighten screw holding trim into place at top of the glass. Next place the other trim into place under the vent trim and tighten the screws on both sides.
This white right-hand side oven door trim is a functional and aesthetic component designed to frame the outer edge of the oven door. Positioned along the door’s right side, it enhances insulation, helps retain heat, and protects the glass panel from damage. Its durable construction ensures long-term performance while contributing to a clean, finished appearance. Replacing a cracked or damaged trim restores the door’s structural integrity and visual appeal. Installation requires partial disassembly of the oven door and may involve removing screws or panels to access the mounting points.
This white right-hand side oven door trim is a functional and aesthetic component designed to frame the outer edge of the oven door. Positioned along the door’s right side, it enhances insulation, helps retain heat, and protects the glass panel from damage. Its durable construction ensures long-term performance while contributing to a clean, finished appearance. Replacing a cracked or damaged trim restores the door’s structural integrity and visual appeal. Installation requires partial disassembly of the oven door and may involve removing screws or panels to access the mounting points.
Installation Instructions
Philip from Vandalia, MI
Replace shattered outer door glass
This is not the best design. You'll need to have an extra set of hands to hold the trim pieces in place. Remember the glass is positioned outside [on top of]the trim pieces. Be careful as the trim pieces are rather brittle and can be hard to locate in their proper position. Position glass in the holding tabs at the bottom, hold glass against the trim pieces and gently position door handle over glass and trim.The handle holds everything together. No instructions are shipped w/ parts.
Screws are not included with the trim. Must order screws separately.
Screws are not included with the trim. Must order screws separately.
Installation Instructions
Philip from Vandalia, MI
Replace shattered outer door glass
This is not the best design. You'll need to have an extra set of hands to hold the trim pieces in place. Remember the glass is positioned outside [on top of]the trim pieces. Be careful as the trim pieces are rather brittle and can be hard to locate in their proper position. Position glass in the holding tabs at the bottom, hold glass against the trim pieces and gently position door handle over glass and trim.The handle holds everything together. No instructions are shipped w/ parts.
Installation Instructions
Elijah from Killeen, TX
I had several broken appilances broken with parts to be replaced.
I had ordered the parts from Part Select and came with in a week. I ahd a Whrilpool microwave that had a door panel and vent grille that needed to be replaced and that was rplced with ease took less that five minutes to do. My Maytag refridgerator had it kickplate grille replace along with the pivot block that took all of about two minutes. The longest job that took about 5 minutes was my Whirlpool glass oven door that needed to be replaced, but that was pretty ease to replace also with an extra hand from my son. I just didn't want to break another glass door or I would have done it myself plus I was teaching him how to do self reparts.
Original Equipment Manufacturer

MAKE THIS REPAIR A GUARANTEED WIN

OVER 2 MILLION PARTS TO ENSURE VICTORY

Installation Instructions
Bruno from LE ROY, NY
bottom piece of range rusty
took old one off and installed new one used electrical tape to hold glass from sliding.Unscrewed moulding and installed new one
$103.32
In Stock
This black slide-in range trim kit is designed to create a clean, built-in appearance by neatly covering the gaps between a 30-inch slide-in range and the surrounding countertop. The three-piece set includes side and rear trim panels that help prevent crumbs and spills from falling into hard-to-clean spaces while giving the installation a polished, finished look. With an overall depth of approximately 34 inches, the low-profile design integrates seamlessly with the range without affecting performance or accessibility. Installation is quick and tool-free, making this an easy, do-it-yourself upgrade that improves both the appearance and practicality of a slide-in range setup.
This black slide-in range trim kit is designed to create a clean, built-in appearance by neatly covering the gaps between a 30-inch slide-in range and the surrounding countertop. The three-piece set includes side and rear trim panels that help prevent crumbs and spills from falling into hard-to-clean spaces while giving the installation a polished, finished look. With an overall depth of approximately 34 inches, the low-profile design integrates seamlessly with the range without affecting performance or accessibility. Installation is quick and tool-free, making this an easy, do-it-yourself upgrade that improves both the appearance and practicality of a slide-in range setup.
$103.20
On Order
$101.36
Special Order
$92.88
Special Order