Weber Built-In Cooking Parts

Connect the grill hose and regulator to the main gas line with this bulkhead assembly for select gas grills. It includes a metal connector, mounting bracket, screw, and washer. Replace it if the connector is corroded, damaged, or leaking. Turn off the gas supply before repair. Have all connections checked for leaks before using the grill. Confirm fit with the exact model number.

A burner with uneven flames or poor heating may have a dirty, damaged, or incorrectly placed burner cap. This black cap covers a high-output burner head and helps guide the flame outward for steady heat. First, let the cooktop cool and remove any grease or food blocking the burner openings. Dry every surface completely and reseat the cap before testing. Replacement may be needed if the cap is chipped, bent, corroded, or no longer rests evenly. Match the new cap to the appliance model and burner location because similar caps can differ. Stop using the cooktop and shut off the gas supply if you detect a gas odor.

This is a genuine Weber replacement part that is sourced from original equipment manufacturer for use on gas grills. It is a high quality part that is secured to the nozzle of the propane tank to supply fuel to the burners. This assembly includes the metal regulator with a plastic knob and the durable rubber hose with a brass fitting. To replace this part you will need an adjustable wrench.

This is a genuine item that is supplied directly from the original equipment manufacturer for use with Weber grills. It is an identical replacement for a missing or damaged side burner ring that was originally installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this component. Keep in mind this high-quality part is made of durable metal and is sold individually.

Better heat control begins with Flavorizer bars that are clean and free from major damage. These stainless steel covers spread burner heat across the cooking area while turning food drippings into smoke and reducing grease buildup below. Replace the set if the bars are warped, rusted through, or difficult to clean. Measure the old bars and check the full grill model before ordering. Close the fuel valve, disconnect the tank if required, and wait until every surface is cool before installation.

This crossover tube is an OEM part direct from the Weber manufacturer. Made use with several gas grills, this item includes four drip shields on a bracket. The tube transfers the flame from the left main burner to the right tubes. Please refer to the manual for further instructions. The crossover tube is sold individually. A pair of pliers, screwdriver and a socket set is helpful in making the replacement.

This replacement bezel is a genuine Weber item, it is not an aftermarket imitation. It is sourced from original equipment manufacturer for use with grills. It is the bezel for the lid mounted thermometer which is sold separately. Please note, this metal item is sold individually.