46513101 - Overview

This stainless steel fixed side table adds convenient prep and storage space to your grill setup. Featuring a durable stainless steel surface with sleek plastic trim, it provides a sturdy area for marinating, cutting, or holding plates and utensils. The table can be mounted on either the left or right side of your grill, and installation ...Read moreis simple with the included hardware—just attach and secure for a more organized grilling experience.

This is a genuine replacement part sourced directly from the manufacturer. The bulkhead assembly is commonly found in Weber gas grills. This part includes a metal connector nozzle with a metal bracket and a screw and washer for attachment. It is used to connect the main gas line with the hose and regulator. You will require a screwdriver when replacing this item.

This is a manufacturer sourced replacement thermometer designed for use with Weber grills. It can be used to measure temperature inside the grill and the temperature of the food. This part is made out metal and it is sold individually. Wingnut is included. Dial reads 150 - 600 degrees.

This is a genuine Weber replacement part that is sourced from original equipment manufacturer for use on gas grills. It is a high quality part that is secured to the nozzle of the propane tank to supply fuel to the burners. This assembly includes the metal regulator with a plastic knob and the durable rubber hose with a brass fitting. To replace this part you will need an adjustable wrench.

This is a genuine Weber replacement part that has been sourced from the original manufacturer. The metal manifold assembly is used to carry propane from the tank to the burners. This assembly includes the tubes and the valves. This item is available as an individual replacement part.

This is an authentic OEM sourced replacement set of flavorizer bars that are specially designed for use with Weber grills. The purpose of these bars is to direct grease and drippings away from the burner tubes, this will help to cut down on flare-ups tremendously. After each use allow the parts to cool down and wash them with warm water a...Read morend soap to prevent rusting or warping. Plese note this set includes five high-quality porcelain enameled steel bars.

An authentic OEM sourced set of control knobs designed for use with Weber gas grills. These knobs are secured over control valves to allow user to adjust the gas flow. Over time due to weathering the plastic may deteriorate and crack eventually requiring replacement. This set includes three dark gray plastic knobs with a chrome finish top and the red Weber logo.

This crossover tube is an OEM part direct from the Weber manufacturer. Made use with several gas grills, this item includes four drip shields on a bracket. The tube transfers the flame from the left main burner to the right tubes. Please refer to the manual for further instructions. The crossover tube is sold individually. A pair of pliers, screwdriver and a socket set is helpful in making the replacement.