My Orders
Uni Refrigerator Hinges
GET YOUR OFFICIAL Uni PARTS TO ENSURE VICTORY
Popular Uni Refrigerator Hinges
This mullion hinge pin is a genuine OEM replacement part, measuring 1.5 inches by 1.25 inches by 0.85 inches. It is specially designed to secure the mullion in refrigerators, allowing it to pivot and ensure smooth door movement. The mullion acts as a barrier between the refrigerator and freezer to maintain the desired temperatures for each section. A damaged or loose hinge pin will result in temperature fluctuations, frost buildup along the door edges, and difficulties opening and closing the door. Therefore, it is important that you replace the pin as soon as it is no longer functioning. Note that your appliance may require two hinge pins, one near the top of the mullion and one near the bottom. Remove the mullion cover, detach the hinge pin, and install a the new one into the hinge assembly. Place the cover back on and verify that the hinge assembly is working by carefully opening and closing the refrigerator doors to check that they are moving smoothly. Each sold individually.
This mullion hinge pin is a genuine OEM replacement part, measuring 1.5 inches by 1.25 inches by 0.85 inches. It is specially designed to secure the mullion in refrigerators, allowing it to pivot and ensure smooth door movement. The mullion acts as a barrier between the refrigerator and freezer to maintain the desired temperatures for each section. A damaged or loose hinge pin will result in temperature fluctuations, frost buildup along the door edges, and difficulties opening and closing the door. Therefore, it is important that you replace the pin as soon as it is no longer functioning. Note that your appliance may require two hinge pins, one near the top of the mullion and one near the bottom. Remove the mullion cover, detach the hinge pin, and install a the new one into the hinge assembly. Place the cover back on and verify that the hinge assembly is working by carefully opening and closing the refrigerator doors to check that they are moving smoothly. Each sold individually.
Installation Instructions
Bernard from NEW WINDSOR, NY
1 Broken plastic mullion hinge. Mullion was not operating correctly.
Removed screw on Mullion so that the replacement hinge can slide onto the small plastic bracket on the door. Slid the mullion on the hinges and screwed in muliion (1 screw).
Designed to support proper door alignment and sealing, this hinge mullion flipper closes the gap between refrigerator doors, helping to maintain optimal cooling performance. It plays a key role in reducing energy loss and keeping food fresh by preventing warm air from entering the fridge. This part fits select models and installs between the doors—please verify compatibility before purchase.
Designed to support proper door alignment and sealing, this hinge mullion flipper closes the gap between refrigerator doors, helping to maintain optimal cooling performance. It plays a key role in reducing energy loss and keeping food fresh by preventing warm air from entering the fridge. This part fits select models and installs between the doors—please verify compatibility before purchase.
This is a replacement hinge bearing for your refrigerator. The hinge bearing is found on the door hinge, and reduces friction when the door opens and closes. If the bearing is damaged, you may not be able to open or close the door properly, and in this case, it will need to be replaced. It is made of white plastic and is approximately 2 inches long and 1 inch in diameter. This part is sold individually and is a genuine OEM part.
This is a replacement hinge bearing for your refrigerator. The hinge bearing is found on the door hinge, and reduces friction when the door opens and closes. If the bearing is damaged, you may not be able to open or close the door properly, and in this case, it will need to be replaced. It is made of white plastic and is approximately 2 inches long and 1 inch in diameter. This part is sold individually and is a genuine OEM part.
Installation Instructions
amy from SOMERVILLE, MA
Door sagging, creating a gap to let in condensation
You tube is my best friend for DIY repair. I supported the door with wood blocks, removed the bottom bracket and was able to slide the refrigerator door down and out without removing the freezer door. Replaced both hinge bearings and door stop and washer on bottom hinge and slid the door back into place. Door is very light when empty. Fas
... Read more
t and easy, door opens and closes smoothly and no problem with condensation anymore.
Read less
This door hinge bushing, or hinge bearing, is a genuine OEM replacement part for your refrigerator. The hinge bearing helps the refrigerator door stay on track when opening and closing, ensuring it is flush with the cabinet when closed. You will need a screwdriver and a ratchet in order to complete this repair.
This door hinge bushing, or hinge bearing, is a genuine OEM replacement part for your refrigerator. The hinge bearing helps the refrigerator door stay on track when opening and closing, ensuring it is flush with the cabinet when closed. You will need a screwdriver and a ratchet in order to complete this repair.
Installation Instructions
Edward from Andover, CT
Refrigerator door was not sealing correctly.
Remove screws from lower hinge and carefully remove the door. In my case it was the lower bearing, flip door upside down being careful to remove anything which might fall off first. I removed the door stop and then pulled the broken bearing out with pliers. Then I pushed the new one in and reassembled it.
Installation Instructions
LEE from LEO, IN
cracked bottom hinge
My 4 year old grandson used the frig door as a swing.The bottom hinge cracked, then the door wouldn't seal. I propped the door up with some books, removed the broken hinge (2 bolts) and replaced with the new part. Simple fix on the door, only time will fix the 4 year old!
MAKE THIS REPAIR A GUARANTEED WIN
OVER 2 MILLION PARTS TO ENSURE VICTORY
The Frigidaire Lower Hinge Pin, a quality assured OEM part, is instrumental to your refrigerator's performance and durability. Specifically designed for Frigidaire, Electrolux, White Westinghouse, and Tappan refrigerators, this Lower Hinge Pin grants your refrigerator door the mobility to sway open and shut gracefully. Mentioned as the Pin-lower hinge, its vital role is to allow seamless door pivoting. Remember, this genuine OEM piece may differ slightly in size and shape from other similar looking parts, thus do verify the compatibility with your model before purchasing. Moreover, it's advisable to don personal protective equipment such as work gloves during the installation of this part to ensure safety. Rely on the Frigidaire Lower Hinge Pin for keeping your refrigerator working smoothly and efficiently.
The Frigidaire Lower Hinge Pin, a quality assured OEM part, is instrumental to your refrigerator's performance and durability. Specifically designed for Frigidaire, Electrolux, White Westinghouse, and Tappan refrigerators, this Lower Hinge Pin grants your refrigerator door the mobility to sway open and shut gracefully. Mentioned as the Pin-lower hinge, its vital role is to allow seamless door pivoting. Remember, this genuine OEM piece may differ slightly in size and shape from other similar looking parts, thus do verify the compatibility with your model before purchasing. Moreover, it's advisable to don personal protective equipment such as work gloves during the installation of this part to ensure safety. Rely on the Frigidaire Lower Hinge Pin for keeping your refrigerator working smoothly and efficiently.
Installation Instructions
Patrick from Hollis, ME
refrig. door fell off lower hinge
took door off to see damage / what caused it . put door back on with temporary fix. /
looked up parts online / ordered parts online.
received parts very quickly. removed doors again, put on repair parts , tested - ok now.
looked up parts online / ordered parts online.
received parts very quickly. removed doors again, put on repair parts , tested - ok now.
This is the top hinge.
This is the top hinge.
Installation Instructions
John from Lancaster, CA
The original part was plastic/and broke
unscrewed to little bolts and installed the new/metal part we got rfom partselect.If we may say.this is a great company to buy from! Fast!
Introducing the genuine Frigidaire appliance part- the Center Hinge Pin. As a crucial component of your refrigerator, this high-quality pin allows the door to pivot open and close smoothly. It is an original OEM part suitable for certain models of Frigidaire, Electrolux, White Westinghouse, and Tappan appliances. Featuring notable durability and great precision, this center hinge pin ensures your appliance operates at its best. Please verify the part number for compatibility with your model before purchasing as variations in size and shape may exist. Always wear work gloves for protection during installation.
Introducing the genuine Frigidaire appliance part- the Center Hinge Pin. As a crucial component of your refrigerator, this high-quality pin allows the door to pivot open and close smoothly. It is an original OEM part suitable for certain models of Frigidaire, Electrolux, White Westinghouse, and Tappan appliances. Featuring notable durability and great precision, this center hinge pin ensures your appliance operates at its best. Please verify the part number for compatibility with your model before purchasing as variations in size and shape may exist. Always wear work gloves for protection during installation.
Installation Instructions
Nasser from Paterson, NJ
Lost parts
screwed the center hinge and spacer on the refrigerator then installed the center pin on the hinge and bottom door placed the top door on the pin and then screwedthe top hinge to the refrigerator,like new
White in color.
White in color.
Installation Instructions
amy from SOMERVILLE, MA
Door sagging, creating a gap to let in condensation
You tube is my best friend for DIY repair. I supported the door with wood blocks, removed the bottom bracket and was able to slide the refrigerator door down and out without removing the freezer door. Replaced both hinge bearings and door stop and washer on bottom hinge and slid the door back into place. Door is very light when empty. Fas
... Read more
t and easy, door opens and closes smoothly and no problem with condensation anymore.
Read less