Trimmer Switches

Trimmer Solenoid This solenoid is an authentic manufacturer replacement part for use in lawn tractors. It sends the electrical current from the battery to the motor to allow the tractor to start and run. The solenoid will need to be replaced if it is damaged or experiencing electrical failure. Signs of a failed solenoid include difficulties cranking the engine, hearing clicking or no sound at all when turning the ignition key, and a starter that cannot stop running. Begin the repair by disconnecting the battery for your safety. Take a note/picture of how the wire connectors are routed before disconnecting them. Remove the bolts that secure the solenoid in place and pull the faulty part out. Position the new solenoid in its place and secure it with the mounting bolts. Use your notes to reconnect the wiring and battery.

Trimmer Switch This OEM switch is used on a variety of different lawn equipment models and is sold individually. This switch is used to turn your lawn equipment on and off, so if your equipment is either not turning on, or this switch feels loose within its housing, it may be time to replace it. To remove it, separate the two halves of the housing which it connects to, disconnect the throttle and other wires with pliers, and depress the securing tabs. To install the new switch, click it into place within the housing and connect the appropriate wires to the two terminals, and then reconnect the throttle cable and other wires, and then simply align the two halves of the housing and secure with screws.

Trimmer Switch Trigger This Switch Trigger is an Authentic OEM replacement part sourced directly from Ryobi for the use in a Power Head Trimmer. The switch trigger allows the user to have control of the speed of the tool. The amount of pressure that is applied to the trigger the more speed you get. A screwdriver will be needed to repair this part. This is made of a high-quality plastic and is sold separately.

Trimmer On-off Switch This is a Genuine Manufacturer Sourced replacement part used on a variety of Black and Decker Trimmers/Edgers. This item is Sold Individually. Switches are a commonly replaced part in power tools, handling on/off operations. Because switches use mechanical internals, they will degrade and wear out over time, eventually requiring replacement.

Trimmer Switch This Switch is a black, plastic on/off switch for a trimmer. Installation of this manufacturer-certified switch is rated as "Easy" and requires a screwdriver, wrench set and socket set. Refer to your make, model, and diagrams to ensure this switch is correct for you.

Trimmer Switch-ignition This is an authentic replacement part sourced from the original manufacturer for use with Toro lawn tractors and riding mowers. The ignition switch goes next to the hour meter. If this part becomes broken it will need to be replaced and may require a screwdriver during the installation. This part is available individually and is made of plastic and metal.

Trimmer Switch Trigger, Lock-out Butto Introducing Echo's high-quality Switch Trigger, Lock-Out Button, and On/Off Assembly. This assembly is excellently designed to offer a seamless replacement to enhance your Echo equipment's efficiency. It comes with an easy-to-use switch trigger, ensuring peak performance in operation. Also included is a lock-out button that ensures your equipment remains safe during non-use periods. The on/off switch assembly facilitates easy control, making your product thoroughly user-friendly. Trust in Echo's quality and experience the difference in your equipment's operation.

Trimmer Trigger Switch This authentic OEM sourced replacement part is designed for use with Ryobi power heads. This trigger allows user to control the switch. It is made out of plastic and it is sold individually. To complete this repair you would need a screwdriver. • Remove screws securing the housing • Remove the old trigger (keep the springs) • Replace trigger and reassemble the power head

Trimmer Switch This is a genuine replacement part manufactured for use with gas powered trimmers. This rocker switch, also called a kill switch has two positions. The run position allows the trimmer to start, and stay on, the the off position will shut down the engine. The switch is sold individually.

Trimmer Switch V-15-3a6 This replacement service switch is specially designed for use with Makita saws. It is a high-quality component which is supplied directly from the original equipment manufacturer. This part plays an important role because it controls the on/off function of the tool. Over time switch may develop mechanical or electrical issues eventually requiring replacement. It is a durable plastic body switch which is sold individually.