Trimmer Starters

Trimmer Recoil Starter Assembly This is an authentic OEM sourced replacement recoil starter assembly. It is specially designed for use with Echo handheld lawn and garden equipment. This is the starter assembly that allows user to start the equipment. This assembly consists of a plastic shroud, starter pulley, recoil spring, plastic handle grip and the the pull rope. Please note, the hardware to secure this assembly is sold separately. To complete this repair you will need a hex key also known as an allen wrench. • First remove the (4) screws that secure the old assembly • Remove old assembly and secure the new one

Trimmer Starter Recoil Spring

★★★★★

★★★★★

1 Review

Also referred to as a Recoil Spring, this OEM replacement part is used to rewind the pull rope back into the starter housing. This Spring is sold individually, not as part of a kit or assembly, and is made of metal. If the pull cord will not retract into the housing, inspect the Recoil Spring for signs of wear or damage, replacing if necessary. You will need a screwdriver to complete this repair. Customers rate this repair as Easy.

Trimmer Starter Pawl Bridge

★★★★★

★★★★★

3 Reviews

The Starter Pawl bridge provides the resistance needed for the starter rope to start the trimming engine. It is an OEM part that attaches inside the recoil assembly. If broken due to weaar or fatigue, the engine will not engaged when the rope is pulled, and the part should be replaced. Installation is rated as easy and requires a screwdrvier, pliers and nutdriver. Refer to your make, model and diagram to check if this part is correct. This part is metal, individually sold, and comes in gold.

Trimmer Starter Assembly

★★★★★

★★★★★

1 Review

This is an authentic OEM sourced replacement starter housing which is designed for use with Husqvarna lawn and garden equipment. It is the starter housing assembly which is used to pull-start the engine. It is a complete assembly which includes a durable plastic housing, starter pulley, starter spring, and the pull rope with the grip, please note the hardware to secure this assembly is sold separately.

Trimmer Rope Kit The chainsaw starter rope is a three-foot-long white rope that is approved by the original equipment manufacturer, and which wraps around the recoil pulley and is pulled to start the engine. Installation is rated as "Easy" by customers and requires a screw driver, pliers, and torx screwdriver. If the rope breaks it should be replaced. Refer to your make, model and diagram to ensure this rope is right for your machine.

Trimmer Recoil Starter Assembly This is a genuine manufacturer sourced replacement starter assembly. It is designed for use with handheld lawn and garden equipment. This is the starter assembly that allows user to start the unit by pulling grip/rope. It includes a plastic shroud/housing, starter pulley, starter spring, grip and the the pull rope. Please note the hardware used to attach this assembly and the starter pawl assembly. To complete this repair you will need a screwdriver. • First remove four (4) screws that secure the assembly • Remove old assembly • Secure the new one and test the unit

Trimmer Starter Pulley Kit It is a genuine component that is supplied by the original manufacturer to use for a Husqvarna trimmers. This part is made of steel and hard plastic. This part includes the drive pulley, rewind pulley, recoil spring and a drive spring. If the engine does not start, has a hard time starting or the pull rope does not retract then it is time to replace this part. Before replacing this part, please make sure the engine is cooled and you remove the wire and boot from the spark plug to avoid the engine by starting.

Trimmer Starter Housing (includes 3 & 13) This is an authentic OEM sourced component which is specially designed for Bolens and MTD handheld string trimmers. The item provides an identical replacement for a missing or a damaged starter housing that allows a user to pull-start the engine. This high-quality part is sold individually, note it includes the plastic housing, the starter pulley, the starter spring, the pull rope with the grip and the hardware to secure. Please refer to the appropriate diagrams for your model to ensure the correct repair procedure. A screwdriver will be needed to replace this starter housing.

Trimmer Starter Pawl Assembly This item has been OEM sourced to be used with trimmers, blowers, hedge clippers, gas-powered drills, edgers, and pruners. The starter pawl is used as a connection between the flywheel and the recoil pulley. This item spins when the starter rope is pulled and in turn, the flywheel gets rotates to start the motor. This item is a complete part that includes both springs and both pawls.

Trimmer Starter Pulley Assembly This starter pulley assembly is an authentic Echo replacement part manufactured for use with outdoor power equipment. The starter pawls, and springs can wear out from normal use, and replacing the pulley assembly can be less time consuming than replace all the parts individually. The starter pulley assembly is sold individually.