Poulan Trimmer Starters
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Poulan Trimmer Starters
Your Price
$10.89
In Stock
Poulan Trimmer Starter Recoil Spring
PartSelect Number PS9030463
Manufacturer Part Number 545008013
Also referred to as a Recoil Spring, this OEM replacement part is used to rewind the pull rope back into the starter housing. This Spring is sold individually, not as part of a kit or assembly, and is made of metal.
If the pull cord will not retract into the housing, inspect the Recoil Spring for signs of wear or damage, replacing if necessary. You will need a screwdriver to complete this repair.
Customers rate this repair as Easy.
Your Price
$34.75
In Stock
Poulan Trimmer Starter Pawl Bridge
PartSelect Number PS9282878
Manufacturer Part Number 503873305
The Starter Pawl bridge provides the resistance needed for the starter rope to start the trimming engine. It is an OEM part that attaches inside the recoil assembly. If broken due to weaar or fatigue, the engine will not engaged when the rope is pulled, and the part should be replaced. Installation is rated as easy and requires a screwdrvier, pliers and nutdriver. Refer to your make, model and diagram to check if this part is correct. This part is metal, individually sold, and comes in gold.
Your Price
$7.63
In Stock
Poulan Trimmer Rope Kit
PartSelect Number PS9008182
Manufacturer Part Number 530069232
The chainsaw starter rope is a three-foot-long white rope that is approved by the original equipment manufacturer, and which wraps around the recoil pulley and is pulled to start the engine. Installation is rated as "Easy" by customers and requires a screw driver, pliers, and torx screwdriver. If the rope breaks it should be replaced. Refer to your make, model and diagram to ensure this rope is right for your machine.
Your Price
$18.34
In Stock
Poulan Trimmer Starter Pulley Kit
PartSelect Number PS9982864
Manufacturer Part Number 585530301
It is a genuine component that is supplied by the original manufacturer to use for a Husqvarna trimmers. This part is made of steel and hard plastic. This part includes the drive pulley, rewind pulley, recoil spring and a drive spring. If the engine does not start, has a hard time starting or the pull rope does not retract then it is time to replace this part. Before replacing this part, please make sure the engine is cooled and you remove the wire and boot from the spark plug to avoid the engine by starting.
Your Price
$15.91
In Stock
Poulan Trimmer Starter Housing Assembly
PartSelect Number PS18528461
Manufacturer Part Number 574673401
This replacement starter housing assembly is an authentic item that is supplied from original manufacturer for use with Poulan hedge trimmers. It is the assembly which allows a user to pull-start the unit. It is a complete assembly which includes a durable plastic housing, starter pulley, starter spring and the pull rope with the grip-handle. Please note the hardware to secure this item is sold separately.
Your Price
$15.27
In Stock
Poulan Trimmer Start Spring
PartSelect Number PS16365370
Manufacturer Part Number 545008014
This is a genuine OEM approved replacement starter spring is specially designed for use with gandheld gas powered blowers and trimmers. The purpose of this spring is to retract the starter assembly on the engine, so it engages the drive cup on the flywheel to start the engine when pulled. This spring is made out of metal and it is sold individually.
Your Price
$18.34
In Stock
Poulan Trimmer Recoil Starter Pulley
PartSelect Number PS12619390
Manufacturer Part Number 545050407
This is a genuine OEM sourced replacement part that has been sourced from the original manufacturer to be used with trimmers, blowers, and edgers from Poulan and Weed Eater. The pulley is used to actuate the flywheel when starting the engine. This item is priced as an individual item.
Your Price
$9.23
Special Order
Poulan Trimmer Spring
PartSelect Number PS9289230
Manufacturer Part Number 545008015
This is a genuine OEM approved starter spring which is specially designed for use with handheld lawn and garden equipment. It is an identical replacement for a missing or a faulty component that was installed on a new unit. The purpose of this spring is to retract the starter assembly on the engine, so it engages the drive cup on the flywheel to start the engine when pulled. This high-quality spring is made of durable metal and is sold individually. Please make sure to check the appropriate diagrams of your model for the correct location and application of this item.
Your Price
$15.27
In Stock
Poulan Trimmer Rewind Spring
PartSelect Number PS12643271
Manufacturer Part Number 545008011
The recoil starter spring is a genuine item that is supplied by the original equipment manufacturer for use with trimmers and blowers made by Poulan and Weed Eater. It attaches to the fan housing assembly and helps to retract the starter rope. To replace this item it may require the use of a screwdriver, a set of pliers, and a wrench. This high-quality part is made of metal and is priced individually.
Your Price
$2.99
In Stock
Poulan Trimmer Spring
PartSelect Number PS16365671
Manufacturer Part Number 545188301
This is an original replacement part sourced directly from the manufacturer. The spring is found in Craftsman trimmers. This part is made of metal, and is used in the starter assembly to provide torsion to the starter hub. You may require an Allen wrench or screwdriver when replacing this item. The spring is sold as an individual replacement part.
Related Poulan Trimmer Parts
- Poulan Trimmer Caps and Lids
- Poulan Trimmer Carburetors
- Poulan Trimmer Control Cables
- Poulan Trimmer Engines
- Poulan Trimmer Filters
- Poulan Trimmer Handles
- Poulan Trimmer Hardware
- Poulan Trimmer Hoses and Tubes
- Poulan Trimmer Ignitions
- Poulan Trimmer Seals and Gaskets
- Poulan Trimmer Springs and Shock Absorbers
- Poulan Trimmer Transmissions and Clutches
- Poulan Trimmer Wheels and Rollers