My Orders
Toro Trimmer Parts
GET YOUR OFFICIAL Toro PARTS TO ENSURE VICTORY
Popular Toro Trimmer Parts
This metric height-guide assembly, also called a mow ball, mounts beneath the cutting head of a string mower. It acts as a ground-contact reference that helps keep the cutting head at the selected height for a more consistent cut. Replace the guide if it is cracked, damaged, heavily worn, or worn through from repeated contact with the ground. Before installation, shut off the engine, wait for all moving parts to stop, and disconnect the spark-plug wire. Verify equipment fit before ordering.
This metric height-guide assembly, also called a mow ball, mounts beneath the cutting head of a string mower. It acts as a ground-contact reference that helps keep the cutting head at the selected height for a more consistent cut. Replace the guide if it is cracked, damaged, heavily worn, or worn through from repeated contact with the ground. Before installation, shut off the engine, wait for all moving parts to stop, and disconnect the spark-plug wire. Verify equipment fit before ordering.
This replacement bump-feed button mounts at the bottom of a string trimmer head and operates the line-advance mechanism. Tapping the trimmer head lightly against the ground during use allows additional cutting line to feed from the spool without stopping for a manual adjustment. Replace the button if it is worn, cracked, missing, or no longer responds when tapped. This component replaces the bump button rather than the complete trimmer head. Remove the battery before installation and verify fit before ordering.
This replacement bump-feed button mounts at the bottom of a string trimmer head and operates the line-advance mechanism. Tapping the trimmer head lightly against the ground during use allows additional cutting line to feed from the spool without stopping for a manual adjustment. Replace the button if it is worn, cracked, missing, or no longer responds when tapped. This component replaces the bump button rather than the complete trimmer head. Remove the battery before installation and verify fit before ordering.
This is a genuine OEM sourced component which is specially designed for use with Toro handheld string trimmers. It is a high-quality replacement for a missing or a faulty retainer cap that helps to secure the spool. Please make sure to refer to the appropriate diagrams of your model for the correct application of this part. Keep in mind this high-quality cover is made of durable plastic and is sold individually. Replacing it is a simple task that does not require any tools, simply press two tabs on the old cap to remove it and secure the new one.
This is a genuine OEM sourced component which is specially designed for use with Toro handheld string trimmers. It is a high-quality replacement for a missing or a faulty retainer cap that helps to secure the spool. Please make sure to refer to the appropriate diagrams of your model for the correct application of this part. Keep in mind this high-quality cover is made of durable plastic and is sold individually. Replacing it is a simple task that does not require any tools, simply press two tabs on the old cap to remove it and secure the new one.
A loose or broken spool cap can allow the line spool to shift during trimming. This replacement cover closes the bottom of the trimmer head and helps protect the spool and line from contact with yard debris. Check the cover for cracks, worn edges, or damaged clips if it will not stay attached. Also inspect the spool, spring, and head housing because damage to those pieces may prevent a secure fit or proper line movement. Turn off the trimmer and remove its battery before touching the cutting head. Clear away packed grass, seat the spool correctly, and make sure every cover tab clicks into position before use.
A loose or broken spool cap can allow the line spool to shift during trimming. This replacement cover closes the bottom of the trimmer head and helps protect the spool and line from contact with yard debris. Check the cover for cracks, worn edges, or damaged clips if it will not stay attached. Also inspect the spool, spring, and head housing because damage to those pieces may prevent a secure fit or proper line movement. Turn off the trimmer and remove its battery before touching the cutting head. Clear away packed grass, seat the spool correctly, and make sure every cover tab clicks into position before use.
This bump feed head assembly is a genuine OEM replacement designed for string trimmers, providing automatic line advancement with a simple tap on the ground. It ensures consistent cutting performance without the need for manual adjustments, reducing downtime and improving efficiency. Built for durability and convenience, this assembly is ideal for restoring smooth operation when your trimmer line no longer feeds properly. Installation is quick and straightforward—remove the old head and secure the new one for reliable performance.
This bump feed head assembly is a genuine OEM replacement designed for string trimmers, providing automatic line advancement with a simple tap on the ground. It ensures consistent cutting performance without the need for manual adjustments, reducing downtime and improving efficiency. Built for durability and convenience, this assembly is ideal for restoring smooth operation when your trimmer line no longer feeds properly. Installation is quick and straightforward—remove the old head and secure the new one for reliable performance.
MAKE THIS REPAIR A GUARANTEED WIN
OVER 2 MILLION PARTS TO ENSURE VICTORY
This Gear gear head assembly is designed to transfer power from the drive shaft to the cutting head, allowing the string trimmer or brush cutter to operate smoothly and efficiently. Housed in a durable gearcase, it supports reliable rotation and helps maintain consistent cutting performance during use. Replacing a worn or damaged gear head can resolve issues such as loss of power to the cutting head, excessive noise, or erratic operation, restoring dependable performance. A properly functioning gear head also helps reduce strain on the drive system, contributing to longer service life and more efficient trimming results.
This Gear gear head assembly is designed to transfer power from the drive shaft to the cutting head, allowing the string trimmer or brush cutter to operate smoothly and efficiently. Housed in a durable gearcase, it supports reliable rotation and helps maintain consistent cutting performance during use. Replacing a worn or damaged gear head can resolve issues such as loss of power to the cutting head, excessive noise, or erratic operation, restoring dependable performance. A properly functioning gear head also helps reduce strain on the drive system, contributing to longer service life and more efficient trimming results.
This is an OEM replacement part. It has a left hand threaded screw to remove and attach it to the trimmer head. Its purpose is to hold the spool with the cutting line, in the spool housing. It also acts as the bumper to advance the line from the spool. This is a well used and abused part of the trimmer. It may be a good idea to order an extra one.
This is an OEM replacement part. It has a left hand threaded screw to remove and attach it to the trimmer head. Its purpose is to hold the spool with the cutting line, in the spool housing. It also acts as the bumper to advance the line from the spool. This is a well used and abused part of the trimmer. It may be a good idea to order an extra one.
This item has been sourced from the original manufacturer to be used with electric trimmers from Toro. The plastic cap is used to secure and protect the bottom of the spool. The cap has tabs that snap into the spool housing, so tools may not be needed to install the cap. This part is priced as a single item.
This item has been sourced from the original manufacturer to be used with electric trimmers from Toro. The plastic cap is used to secure and protect the bottom of the spool. The cap has tabs that snap into the spool housing, so tools may not be needed to install the cap. This part is priced as a single item.
Springs are used within outdoor power equipment to provide tension and shock absorption, depending on their application and use. This spring is designed for use within trimmers/brush cutters and is made to provide tension on the spool reel mechanism, and in some cases may be used to advance the line whenever portions of it are cut off. This spring measures approximately 1.3-inches in length when extended and comes as an individual part. If you notice the line/spool in your trimmer is not advancing or is coming too quickly, the spring may be damaged and need replacing. Since this spring is a high-use part, it is not uncommon for it to lose tension over time and need to be replaced. To replace the spring, you will need to unscrew the covering cap, remove the spool feeding reel, remove the old spring and install the new spring with the rest of the assembly. Make sure to feed the line back into the appropriate feeding holes prior to operation of the trimmer.
Springs are used within outdoor power equipment to provide tension and shock absorption, depending on their application and use. This spring is designed for use within trimmers/brush cutters and is made to provide tension on the spool reel mechanism, and in some cases may be used to advance the line whenever portions of it are cut off. This spring measures approximately 1.3-inches in length when extended and comes as an individual part. If you notice the line/spool in your trimmer is not advancing or is coming too quickly, the spring may be damaged and need replacing. Since this spring is a high-use part, it is not uncommon for it to lose tension over time and need to be replaced. To replace the spring, you will need to unscrew the covering cap, remove the spool feeding reel, remove the old spring and install the new spring with the rest of the assembly. Make sure to feed the line back into the appropriate feeding holes prior to operation of the trimmer.
This bump-feed spring is used inside a string trimmer head to help return the spool to position after the head is tapped, allowing the cutting line to advance properly. It ensures smooth, consistent line feeding during trimming. Ideal for replacement when the line no longer advances or the spring becomes worn, bent, or broken.
This bump-feed spring is used inside a string trimmer head to help return the spool to position after the head is tapped, allowing the cutting line to advance properly. It ensures smooth, consistent line feeding during trimming. Ideal for replacement when the line no longer advances or the spring becomes worn, bent, or broken.