My Orders
Tappan Freezer Hardware
GET YOUR OFFICIAL Tappan PARTS TO ENSURE VICTORY
Shop By Part Type
View MorePopular Tappan Freezer Hardware
This gasket retainer clip kit is for freezers. There are 24 pieces in this kit. The clips are what secure the gasket and liner to the freezer lid. The clips are white in color and made of plastic. If you notice frost build up in your freezer or that is it is not maintaining its temperature, this might be because the retainer clips have broken, and this has caused the gasket to become loose. This is a genuine OEM part that is obtained right from the manufacturer, ensuring a quality repair.
This gasket retainer clip kit is for freezers. There are 24 pieces in this kit. The clips are what secure the gasket and liner to the freezer lid. The clips are white in color and made of plastic. If you notice frost build up in your freezer or that is it is not maintaining its temperature, this might be because the retainer clips have broken, and this has caused the gasket to become loose. This is a genuine OEM part that is obtained right from the manufacturer, ensuring a quality repair.
Installation Instructions
Michael from Milan, TN
Old panel lid broken and brittle
Removed lid and placed upside down on floor. Pulled plastic retainer clips and removed gasket. Removed old panel. Repositioned new panel and reversed assembly.
Ordered only one spare plastic clip. Too expensive to invest in more. Luckly only broke one of the old clips.
Carefully pulled clips with small claw hamm ... Read more er.
Ordered only one spare plastic clip. Too expensive to invest in more. Luckly only broke one of the old clips.
Carefully pulled clips with small claw hamm ... Read more er.
Read less
Sold Individually.
Sold Individually.
Installation Instructions
Terrence from WESLACO, TX
missing door handle
installed new handle
This genuine OEM hinge mounting screw is designed for use in Frigidaire and Electrolux refrigerators, providing a secure and reliable way to fasten door hinges to the cabinet. Built with a durable hex washer head and standard threading, it helps restore proper door alignment and maintain a tight seal to prevent cold air loss. Ideal for replacing worn, stripped, or corroded hardware, this heavy-duty screw ensures long-lasting stability and dependable everyday performance.
This genuine OEM hinge mounting screw is designed for use in Frigidaire and Electrolux refrigerators, providing a secure and reliable way to fasten door hinges to the cabinet. Built with a durable hex washer head and standard threading, it helps restore proper door alignment and maintain a tight seal to prevent cold air loss. Ideal for replacing worn, stripped, or corroded hardware, this heavy-duty screw ensures long-lasting stability and dependable everyday performance.
Installation Instructions
Janice from Osseo, MI
Lost hinges when moving
Put in new hinges and two screws
Sold individually.
Sold individually.
Installation Instructions
Glenn from Fort Worth, TX
Dryer squealed loudly
First, I removed the top panel which is held on at the front by pressure clips. Second, I removed the entire front panel which entailed removing 2 screws and 2 wire couplings. Third, I removed the 3 screws on the inside center of the drum which turned out to be unnecessary. Fourth, I slid the drum forward in order to access the rear be
... Read more
aring. Lastly, I replaced the entire bearing assembly including the shaft, bracket, bearing, grounding ball and clip. Again, probably not needed but I had ordered the parts in advance in preparation for the worst.
Read less
MAKE THIS REPAIR A GUARANTEED WIN
OVER 2 MILLION PARTS TO ENSURE VICTORY
This genuine shelf mounting grommet is designed to provide secure support for wire shelves inside your refrigerator or freezer. Made from durable molded plastic, it fits into the interior side wall to hold shelves firmly in place, helping prevent slipping or collapse under the weight of stored items. Small but essential, this component also helps maintain a clean and stable interior, making it a practical replacement if your existing support is worn or damaged.
This genuine shelf mounting grommet is designed to provide secure support for wire shelves inside your refrigerator or freezer. Made from durable molded plastic, it fits into the interior side wall to hold shelves firmly in place, helping prevent slipping or collapse under the weight of stored items. Small but essential, this component also helps maintain a clean and stable interior, making it a practical replacement if your existing support is worn or damaged.
This package contains 40 mounting clips.
This package contains 40 mounting clips.
This strap is designed for use with the evaporator in your refrigerator. The function of this part is to hold wires, tubes, defrost heaters and other parts in place. If you notice that any of these parts are not held in place properly, you will most likely need to replace the refrigerator strap. This part is made entirely of thin metal. The part is very bendable, and the smaller end is designed to fit inside the large one. This part is sold individually. It is an OEM part sourced directly from the manufacturer. Many of our customers have rated this repair as easy.
This strap is designed for use with the evaporator in your refrigerator. The function of this part is to hold wires, tubes, defrost heaters and other parts in place. If you notice that any of these parts are not held in place properly, you will most likely need to replace the refrigerator strap. This part is made entirely of thin metal. The part is very bendable, and the smaller end is designed to fit inside the large one. This part is sold individually. It is an OEM part sourced directly from the manufacturer. Many of our customers have rated this repair as easy.
Sold individually.
Sold individually.