Speed Queen Washer Hardware | Replacement Parts & Accessories | PartSelect

Popular Speed Queen Washer Hardware

Your Price
$5.03
Thrust Washer
PartSelect Number PS11740482
Manufacturer Part Number WP233520
This genuine OEM washer has a 3/4 inch outside diameter. This thrust washer can be used on most makes and models of dryers. A complete list of compatible dryers is available below. The washer is found on dryers around the drum support rollers and idler pulleys, and helps prevent the rollers and pulleys from bumping up against the brackets they are installed on. Your thrust washer could be defective if you notice your dryer wont tumble, rotate, or turn; or there is a load squealing or whining noise when the dryer tumbles. The repair is a relatively easy job. You will require a putty knife, 5/16 inch nut driver, and E-Ring pliers. Remember to disconnect the power to your dryer before you begin the repair.
Fixes these symptoms
Burning smell
Noisy
Pumps but will not spin

See more...
Installation Instructions
Chris from Hopedale, MA says,

Drum not centered , clothes getting stuck in dryer
The first thing I did was to unplug the dryer from the wall. Then I removed the bottom two screws and slid the bottom cover off so i could see all the way to the back, I tipped the dryer back against...read more

Your Price
$5.88
Hose Clamp
PartSelect Number PS11743008
Manufacturer Part Number WP596669
This hose clamp is used in a wide variety of household appliances. Most often it is found in washers, dishwashers, refrigerators, freezers, dehumidifiers, garbage disposals, or air conditioners. This clamp is used to securely attach a hose to another part of your appliance, which helps prevent leaks from those connections. Depending on the appliance, it can attach hoses to drain pumps, water inlet valves, pressure switches, and injector nozzles. We recommend you refer to model-specific diagrams for appropriate uses and exact placement. This hose clamp is made of metal, and is sold individually. To access and replace this part you will need a nut driver, pliers, and screwdrivers. Before you begin any repair work, make sure you have unplugged your appliance, and shut off the water supply if applicable.
Fixes these symptoms
Leaking
Will not stop filling with water


Installation Instructions
jeff from lindenhurst, IL says,

Washing Machine was leaking water
Loosened the hose clamp, removed the injector valve and injector nozzle assembly, replaced both and tightened with new hose clamp. Fixed the problem for less than $20!! Washing machine is 20 years o...read more

Your Price
$7.05
Retaining Ring
PartSelect Number PS11740487
Manufacturer Part Number WP23748
The metal retaining ring, which is under an inch long, holds the rear wheels on the axels of the dryer. The main reason why it would need to replaced is if the retaining ring has sprung out of place or is damaged. Some the symptoms could be that your dryer does not tumble, it makes a loud buzzing noise, or if it pumps, but will not spin. The tools needed for this project are a putty knife, 5/16 nut driver, and snap ring pliers. Refer to the installation video and diagram for further instructions and guidance. Customers ranked this replacement project as easy.
Fixes these symptoms
Burning smell
Noisy
Pumps but will not spin

See more...
Installation Instructions
David from Underwood, IA says,

Loud banging sound. Worn out roller.
Pulled off the lower panel with 5/16 socket.Pulled off the door assembly by removing the two screws at the bottom of the door assembly. I pulled down a little and then out. be carefull of the wires. O...read more

Your Price
$5.15
Lid Hinge Mounting Screw
PartSelect Number PS11748588
Manufacturer Part Number WPW10119828
Sold individually. NOTE: The color on the screw may not be the same as the image, but will still function the same.
Fixes these symptoms
No Symptoms for this part
Installation Instructions
Michael from Claremont, CA says,

Top part of agitator (auger) was not turning
Using kit 285587 was straight forward. Removed fabric softener dispenser & sealing cap. It took more time to find the socket set (needed a 7/16 socket) with a long driver (10 inch) than to unscrew & r...read more

Your Price
$6.47
Spring Retaining Clip
PartSelect Number PS11739294
Manufacturer Part Number WP22001650
This spring retaining clip is just under 1 inch long. The clip is made entirely of metal and is attached to the back wall of the washer, under the console. If your washer is vibrating and louder than usual during the wash cycle, your spring retaining clip could be faulty or damaged. Check the clip for visible damage, wear, and rust. If you notice any signs of damage, the part should be replaced. Remember to disconnect the power from your washing machine before starting this repair.
Fixes these symptoms
Noisy


Installation Instructions
Ralph from Moreno Valley, CA says,

unusually loud rumbling in spin mode, no spin out
removed outer enclosure to expose inside workings. removed all retaining springs to tub and transmission housing. Inverted tub to access agitator pulley and belt. Removed pulley and cut belt off.(...read more

Your Price
$5.93
Hose Clamp
PartSelect Number PS11740613
Manufacturer Part Number WP285655
The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installation, you will need a flat head screw driver to replace the clamp and a drill to access the screws to remove the front of the washer. Be careful if you do not have specific clamp pliers as the clamp could fly off. Once the front of the washer has been removed, take a quick look for water damage or any obvious signs of where the leak is coming from. If it is not obvious, run water to test.
Fixes these symptoms
Leaking


Installation Instructions
Stephen from Laveen, AZ says,

Drive Pump Leaked
It took some trial and error but overall not a difficult project. 1. Take the front covers off. 2. Undo the pully spring to loosen belt 3. Remove belt off idler pulley wheel and free up belt f...read more

Your Price
$5.83
Screw, 8/18 x 3/8
PartSelect Number PS11746840
Manufacturer Part Number WP90767
This screw is sold individually.
Fixes these symptoms
No Symptoms for this part
Installation Instructions
Alexander from Lakeland, FL says,

Broken Dryer Knob
First let me just say that Partselect.com is now one my stored favorites in my web browser. I came home from a business trip and saw a pair of pliers on the dryer. I thought that was odd until my wif...read more

Your Price
$4.97
Screw
PartSelect Number PS11757438
Manufacturer Part Number WPY014874
Sold Individually.
Fixes these symptoms
No Symptoms for this part
Installation Instructions
Gene from Virginia Beach, VA says,

Dryer made loud screeching noise.
After reading all the other repair stories on Partselect, by the way thank you all, I removed the door, then removed the two security hooks that hold the top secure. Then I removed the front panel. I ...read more

Your Price
$4.97
Wave Washer
PartSelect Number PS11757550
Manufacturer Part Number WPY504082
This is the replacement wave washer for your washing machine. It is approximately ¾ inch in diameter. This washer is sold individually and is an authentic OEM part.
Fixes these symptoms
Noisy


Screw
PartSelect Number PS11742743
Manufacturer Part Number WP489355
This screw is sold individually.
Fixes these symptoms
No Symptoms for this part