Samsung Cooktop Parts

Weak flames or a burner that will not light can point to a cracked, warped, or blocked burner base. This metal support helps hold the small surface burner assembly in place and directs gas toward the head for steady cooking. First clean the removable pieces and confirm that the burner cap is level. Also check the igniter and nearby connections before ordering a replacement. Verify fit using the full appliance model and burner location because similar bases may differ. Turn off the gas valve, unplug the range, and wait for every surface to cool. Avoid bending the igniter or changing the gas orifice. After installation, confirm an even flame and discontinue use if gas odor is present.

The burner cap protects the burner head from spills and helps spread out the burner flame for even heating.

*Sold Individually: Pack of 1*

Sold individually.

If a surface burner clicks but lights poorly or burns more strongly on one side, inspect the cap before replacing other components. A chipped, misplaced, or grease-covered cap can disturb the flame pattern. Lift it off only after the burner is off and cool, then clean and dry both mating surfaces. Also check the burner ports for debris without enlarging the openings. If replacement is needed, use the complete range model and burner position to confirm fit. Set the cap level on its matching head before replacing the grate. Test the burner briefly, and turn it off at once if flames remain uneven or you smell gas.

This terminal block assembly is designed for use within various models of ranges and is sold as an individual OEM part without any other hardware included. Terminal blocks are responsible for receiving, managing, and distributing the power within an appliance. Electrical shorts or surges can cause this terminal block to overheat and melt and become inoperable, thus needing immediate replacement. If you smell melting plastic when operating your range, turn it off and disconnect it from power immediately and inspect this terminal block and all other electrical components. To replace this terminal block, disconnect your range from the power and remove it from the wall. Remove the back panel of the range and locate the terminal block, making note of its wire configuration. Unscrew the wires and the ground wire if there is one, and then do the same for the mounting screws. Install the new terminal block in the same position as the previous one, attaching all necessary wires as they were originally, before you reconnect and reposition the range.

Uneven heating or flames that appear only on one side can point to a dirty, warped, or damaged surface burner head. The metal head sits below the burner cap and guides gas around the burner for steady cooking. First remove loose food, inspect the ports, and make sure the cap lies flat. If damage remains, match a replacement to the complete appliance model and exact burner location. Allow all surfaces to cool, close the gas valve, and disconnect electrical power before removal. Do not bend the igniter or change the gas opening. After assembly, check that the flame is even and stop using the range if you smell gas.

This knob assembly offers a comfortable grip and smooth rotation for adjusting appliance settings. Made from durable materials with a polished finish, it combines functionality with a sleek, modern look.