NA30K7750TG Samsung Cooktop - Overview

If a surface burner clicks but lights poorly or burns more strongly on one side, inspect the cap before replacing other components. A chipped, misplaced, or grease-covered cap can disturb the flame pattern. Lift it off only after the burner is off and cool, then clean and dry both mating surfaces. Also check the burner ports for debris wi...Read morethout enlarging the openings. If replacement is needed, use the complete range model and burner position to confirm fit. Set the cap level on its matching head before replacing the grate. Test the burner briefly, and turn it off at once if flames remain uneven or you smell gas.

Weak flames or a burner that will not light can point to a cracked, warped, or blocked burner base. This metal support helps hold the small surface burner assembly in place and directs gas toward the head for steady cooking. First clean the removable pieces and confirm that the burner cap is level. Also check the igniter and nearby connec...Read moretions before ordering a replacement. Verify fit using the full appliance model and burner location because similar bases may differ. Turn off the gas valve, unplug the range, and wait for every surface to cool. Avoid bending the igniter or changing the gas orifice. After installation, confirm an even flame and discontinue use if gas odor is present.

The burner cap protects the burner head from spills and helps spread out the burner flame for even heating.

Uneven heating or flames that appear only on one side can point to a dirty, warped, or damaged surface burner head. The metal head sits below the burner cap and guides gas around the burner for steady cooking. First remove loose food, inspect the ports, and make sure the cap lies flat. If damage remains, match a replacement to the complet...Read moree appliance model and exact burner location. Allow all surfaces to cool, close the gas valve, and disconnect electrical power before removal. Do not bend the igniter or change the gas opening. After assembly, check that the flame is even and stop using the range if you smell gas.

This surface burner cap (part number DG62-00137A) is for ranges. Surface burner cap DG62-00137A fits on top of the burner head. The burner cap protects the burner head from spills and helps spread out the burner flame for even heating. Wait until the surface is cool to the touch before installing this part.

This genuine OEM dual burner cap is a durable replacement part designed to sit on the burner head, protecting it from spills and debris while ensuring even heat distribution for consistent cooking results. Made from high-quality materials to withstand high stovetop temperatures, it helps control the flame area for improved safety and perf...Read moreormance. If your existing burner cap is worn or damaged, replacing it restores proper function and efficiency. Installation is simple—just position the cap securely on the burner head.

Sold individually.