Refrigerator Blades
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Refrigerator Blades
Your Price
$23.88
In Stock
Refrigerator Drive Blade
2. Revove (1) U type nut keeper & (1) metal washer.
3. Remove (1) plastic nut on end of metal auger.
4. Remove inner plastic cover (4) screws and disconnect control rod. (Note postion of control rod befor disconnecting)
5. Note position and order of metal blades and plastic spacers on auger before siding off the end of auger to reposition them upon re-assembly.
6. Remove metal support panel from end of ice bucket (4) screws.
7. Remove auger & plastic cylinder from ice bucket.
8. Remove - slide drive blade off auger.
9. Drive blade replaced.
10. Re-assembled other items removed in reverse order Read more...
PartSelect Number PS12728807
Manufacturer Part Number 241684503
This drive blade is a little under five inches long. It is used for the icemaker of many refrigerators.
Fixes these symptoms
- Ice maker not making ice
- Ice maker won’t dispense ice
- See more...
Installation Instructions
David from Ponca City, OK
ice maker would not rotate out cube or crushed ice.
1. Remove outer plastic face cover (4) screws. 2. Revove (1) U type nut keeper & (1) metal washer.
3. Remove (1) plastic nut on end of metal auger.
4. Remove inner plastic cover (4) screws and disconnect control rod. (Note postion of control rod befor disconnecting)
5. Note position and order of metal blades and plastic spacers on auger before siding off the end of auger to reposition them upon re-assembly.
6. Remove metal support panel from end of ice bucket (4) screws.
7. Remove auger & plastic cylinder from ice bucket.
8. Remove - slide drive blade off auger.
9. Drive blade replaced.
10. Re-assembled other items removed in reverse order Read more...
Refrigerator Ice Crusher Fixed Blade
PartSelect Number PS12728806
Manufacturer Part Number 241684303
The ice crusher blade grinds the ice cubes in the ice container to create crushed ice.
Refrigerator Evaporator Fan Blade
After a few days, the fan made loud noise. Due to defrog heater was open when it was test with ohmmeter. Ice deposited around the fan.
I had to buy a whole ASSY EVAP-REF part # DA96-00395C, and seperated the evaperator, and replaced the heater and sensor.
Spray bottle was used spray hot water to de-iced the evaperator. And salt accelerated the ice melting process.
Note: spray water to clean salt before installing new parts Read more...
PartSelect Number PS4138288
Manufacturer Part Number DA31-00016A
This evaporator fan blade is for refrigerators. Evaporator fan blade circulates air through the evaporator fins and interior compartment of the refrigerator to improve the cooling efficiency.
Installation Instructions
Ductri from RESEDA, CA
Refrigeration side was not cold enough.
Replaced the Broken Cover Motor and the Fan Blade. Fan motor was test with 12VDC power supply, or by replugging fan connector and holding down the door closing switch.After a few days, the fan made loud noise. Due to defrog heater was open when it was test with ohmmeter. Ice deposited around the fan.
I had to buy a whole ASSY EVAP-REF part # DA96-00395C, and seperated the evaperator, and replaced the heater and sensor.
Spray bottle was used spray hot water to de-iced the evaperator. And salt accelerated the ice melting process.
Note: spray water to clean salt before installing new parts Read more...
Refrigerator Blade - Middle
PartSelect Number PS292309
Manufacturer Part Number WR17X1362
Also called Moving Dispenser Blade.
Installation Instructions
Allan from Pleasanton, CA
meatal parts were rusted
the part is fairly easy to take apart, however pay close attention to how things fit and go together. It took me sometime to figure the reassembly out due to my lack of close attention to taking it apart. other than that it is simple.
Read more...