EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖
Sign In | Create Account
| Your Account

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Phone
Keep typing for more specific results...

Parts Departments

Top Model Types View All

Expert Repair Videos

Symptoms

Troubleshoot like a pro using your model's symptoms

View symptoms

Model Number Locator

Find your model number to unlock guaranteed fit

Find my model number

Articles & Guides

How to Fix a Samsung Dryer 3C Error Code - PartSelect

If a Samsung dryer is displaying a 3C error code, there is a communication issue with the motor and control board. In this article we’ll cover how to fix this issue.

How to Reset Your Bosch Dishwasher - PartSelect.com

A step-by-step guide to resetting a Bosch dishwasher. Learn what errors and issues a reset can fix, how to do a soft reset, and how to do a hard reset.

How to Fix an F11 Code on a Frigidaire Oven - PartSelect.com

Learn how to clear the F11 error code on your Frigidaire oven and replace the keypad overlay and electronic control board with our easy DIY how-to guide.

 See more articles & guides

Pump Retainer WP8546127

Official part for Whirlpool, Kenmore, KitchenAid, Roper

★★★★★
★★★★★
(2)

Really Easy 

30 - 60 mins 

Bestseller
Install video
11746362-1-M-Whirlpool-WP8546127-Pump Retainer
Part Location Diagram of WP8546127 Whirlpool Pump Retainer
See part 19 in the diagram
Replacing your Whirlpool Washer Pump Retainer
( Grid squares measure 1x1 inch )
11746362-1-S-Whirlpool-WP8546127-Pump Retainer 11746362-2-S-Whirlpool-WP8546127-Pump Retainer 11746362-3-S-Whirlpool-WP8546127-Pump Retainer Part Location Diagram of WP8546127 Whirlpool Pump Retainer Replacing your Whirlpool Washer Pump Retainer
Price Match
OEM badge Official OEM Part
$9.62
In Stock
Order now and your part arrives by Nov 5
 Fits your 3LA5580XSW1!

About This Part

What it does. Why it matters. Everything you need to know for an easy fix.

Pump Retainer Specifications

Sold Individually.
Part #WP8546127
Manufactured by Whirlpool for Whirlpool, Kenmore, KitchenAid, Roper

You May Also Need

Because heroes deserve fewer surprise re-installs.

$43.18
In Stock
$54.24
In Stock
$20.36
Special Order
$22.52
In Stock
$28.42
In Stock
$18.22
In Stock
$31.58
In Stock
Appliance Cleaner – Part Number: 00312207
Appliance Cleaner
Part #00312207
$53.85
Special Order

Genuine OEM: Original Parts. Lasting Repairs.

Because quality isn't optional.

OEM stands for Original Equipment Manufacturer. This means that the company who made your appliance is also supplying the replacement part.

How Buying OEM Parts Can Save You Time and Money
Features OEM Generic
Genuine brand name
Guaranteed to fit
Superior Quality
Long term value

Part Videos

Watch our pros, then fix it yourself.

Replacing your Whirlpool Washer Pump Retainer

Replacing your Whirlpool Washer Pump Retainer

About this fix

Common problems and models this part fixes.

Really Easy 

30 - 60 mins 

Rated by verified customers

What this part fixes:
  • Leaking
  • Will not drain
Works with the following products:
  • Washer
  • Washer Dryer Combo
Part# WP8546127 replaces these:
AP6013140, 62700, 8546127, WP62700

Customer Reviews

Real ratings from other people who bought this part.

Average Rating:

★★★★★
★★★★★
2 Reviews
5.0

Out of 5

  • 5 Stars
    2
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0

Search reviews left by others. DIY doesn't mean you have to do it alone. Use simple keywords like "fit", "broken", "easy", or "quality" to find reviews that match!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
  • 1
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Daniel C - June 18, 2018
  Verified Purchase
Easy Fix
Used this part along with a new water pump. Installation was easy.
★★★★★
★★★★★
Renate B - August 19, 2020
  Verified Purchase
Easy repair
Washing machine is back in working order. Part came quickly and fit perfectly.
  • 1

Repair Tips

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!

Really Easy 

30 - 60 mins 

Average repair rating from 13 real customers like you

Sort by:
  • 1
  • 2

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sorry, we couldn't find any existing installation instruction that matched.
Leaking water from bottom after wash
9 of 11 people found this instruction helpful.
  • Robert from Wildomar, CA
  • Easy
  • 30 - 60 mins
Turn washer on its side unscrewed clamps used pliers to slide clamps off of two hoses connected to pump then took clips off that hold pump replaced with new pump and put new clips connected hoses and clamps on new pump turned it back upright job finished
Was this helpful?
Thank you for voting!
Pump requires 2 retainers. I had 1 good retainer on the top and little tension on the bottom.
1 of 2 people found this instruction helpful.
  • Frank from ROSWELL, NM
  • Really Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
Pull the washer out away from the wall and tip back.
I used a small metal ammo box to hold up the washer.
The bottom pump retainer is easy reach and remove with a flat screwdriver. I was able to pry off with my hand.
Replace retainer insert into slots on drive motor and twist.
I used a pair of Channellock pliers to lift retainer while pressing along the
side till it snaped into place.
Remove the support box and put washer back.
Then tip washer forward to reset self-leveling mechanism.
Read less
Was this helpful?
Thank you for voting!
Leaking pump
3 of 4 people found this instruction helpful.
  • Paul from GARNER, NC
  • Really Easy
  • 30 - 60 mins
I could not make the repair. If you get the pump specified on the shaft that drives the pump, the pump will be broken. I tried to call, nobody answers the phone. I ended up buying a Washing Machine and I'm stuck with a pump I cannot use.
Was this helpful?
Thank you for voting!
washer would not spin to extract vwater
6 of 6 people found this instruction helpful.
  • Richard from WEEKI WACHEE, FL
  • Very Easy
  • 30 - 60 mins
  • Pliers, Screw drivers, Socket set
will not go over step by step here as there are already a multitude of stories on site with exact situation as mine who have already done so.. What I will say is that PartSelect is easily the absolutely best site on the net for a complete problem diagnosis to finished repair experience. Just input your model # and describe the problem and you get instant diagnosis probabilities along with access to a long list of customer Q & A and reviews, along with step by step videos on diagnosing, dis- assembling, and re-assembling along with links to all parts needed and also some secondary tips along the way. The prices are fabulous (example: I got a clutch assembly kit with several parts and 2 additional parts as a just in case for $55 shpg incl, while my local appliance parts place wanted $59 plus tax for just the main part in my assembly kit with a no return policy and no part guarantee, plus it was only 1 day more to have PartSelect pkg arrive than I would have gotten part from local store). This site is FABULOUS !!!
Read less
Was this helpful?
Thank you for voting!
Water leak
3 of 4 people found this instruction helpful.
  • Joe from Buelton, CA
  • Easy
  • 30 - 60 mins
Disconneted hoses,unplugged.removed drain hose.Turned unit on its side.Unsnapped retainers,tryed to to pull off with just my hands,that didn't work.Used a pry bar to pop off.The end of the shaft was rusted out.I took a dremel with wire brush and cleaned up the end.Then the pump njust slid on.I took it off again and applied some anti-sieze on the end of shaft.then put pump back on.Snapped the retainers and put hoses back on.It was easy.When I first looked up washer parts,I found this other site and the price ws doulbe.Then I found you guys ,1/2 the cost and it was here in 2 days.Thank You Parts select.
Read less
Was this helpful?
Thank you for voting!
washer leaking from bottom
2 of 4 people found this instruction helpful.
  • GREG from SAN CARLOS, CA
  • Easy
  • 30 - 60 mins
  • Pliers, Screw drivers
Video was very helpful. Repair was easy. Remove and replace with just hand tools. The hardest part was moving the washer around to tilt it back. Service was great. I picked regular ground shipping and parts showed up the next day.
Was this helpful?
Thank you for voting!
leaking water at bottom
2 of 4 people found this instruction helpful.
  • teresa from heavener, OK
  • Really Easy
  • Less than 15 mins
  • Pliers, Wrench (Adjustable)
got under machine and replaced pump
Was this helpful?
Thank you for voting!
leaking water pump, also little agitation whirlpool washer
5 of 9 people found this instruction helpful.
  • brian from peoria, AZ
  • Really Easy
  • 1- 2 hours
  • Nutdriver, Socket set
1. removed screws holding control panel to the washers main body. unplugg the wire connector that goes to the lid switch.

2. slide the whole body off, makes it easier than tilting washer back..when removing a stubborn pump.

3.disconnected both hoses from water pump.
removed 2 retaining clips

4.pulled the old pump off , put the new one on.

so easy .......my mom could do this
Read less
Was this helpful?
Thank you for voting!
leaking drain pump. Obviously a common problem with this washer
15 of 17 people found this instruction helpful.
  • John from Solana Beach, CA
  • Really Easy
  • 15 - 30 mins
  • Pliers, Wrench (Adjustable)
Just turned the washer on its side, popped out the two retainer clips with pliers and screwdriver, pulled the pump out by hand, put the new one in and replaced one rusty clip with the new one from parts select, and used the other old one. I ordered the parts on Monday, and they came tuesday, even with the standard shipping. Also the website parts diagram and whole website design is good.
Read less
Was this helpful?
Thank you for voting!
Water Pump was leaking
9 of 13 people found this instruction helpful.
  • Rick from Liberty, SC
  • Easy
  • 30 - 60 mins
  • Pliers, Screw drivers
The water pump had a small leak when washing clothes, and my wife was nagging me about it. I know men, youwere shocked that I said nagging and wife in the same sentence. Me being a man, I would have just left it since it is in the laundry room in the carport.

I turned the washer on its side and felt where the leak was on the pump, went inside and ordered the new pump. It was here in 2 days and it took 15 mins to put it back on with only a screwdriver to snap off the retainers and pliers to undo two hoses.

I told my woman that it was fixed and we have lived happily ever after and we played Appliance Repair Man and I was paid very well for the "House Call" if you know what I mean!!!!!
Read less
Was this helpful?
Thank you for voting!
  • 1
  • 2

DIY Questions and Expert Answers

1 question answered by our Repair Experts.

Ask our experts a question about this part and we'll get back to you as soon as possible!

We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Thuc - For model number LLR8245AWO
October 27, 2022
My Whirlpool washer is leaking from the bottom near the front during fill
Chris Boyle Profile
Hello Thuc, thank you for contacting us. According to our research on model number LLR8245AWO, the problem appears to be with the direct drive pump, part number PS11741239. If that does not help then the issue is likely to be with the water inlet valve, part number PS334646. We also recommend checking the tub hoses for blockage and damage. Customer service is always available to help you place an order if you are having trouble doing so. Good luck with your repair!
$32.63
In Stock
Water Inlet Valve with Mounting Bracket
$43.18
In Stock
Washer Direct Drive Water Pump
Was this helpful?
Thank you for voting!
  • 1

This Part Also Fits These Models

Don't see your model? Use our Fit Checker to confirm!

Check Part Fit
Part #WP8546127
Brand
Model Number
Description
Kenmore
10682872600
Washer - Kenmore Washing Machine Model 106.82872600 (10682872600, 106 82872600) Parts
Kenmore
110088732791
Washer Dryer Combo
Kenmore
1101050299
Washer - Kenmore Washing Machine Model 110.1050299 (1101050299, 110 1050299) Parts
Kenmore
11013212200
Washer
Kenmore
11014102300
Washer
Kenmore
11014112300
Washer
Kenmore
11014202300
Washer
Kenmore
11014212200
Washer
Kenmore
11014222300
Washer
Kenmore
11014502300
Washer
Kenmore
11014852300
Washer
Kenmore
11015732400
Washer
Kenmore
11015842400
Washer - Kenmore Washing Machine
Kenmore
11015852400
Washer
Kenmore
11015862400
Washer
Kenmore
11015864400
Washer
Kenmore
11015942400
Washer
Kenmore
11015942401
Washer
Kenmore
11015944400
Washer
Kenmore
11015944401
Washer
Kenmore
11015952400
Washer
Kenmore
11015952401
Washer
Kenmore
11015954400
Washer
Kenmore
11015954401
Washer
Kenmore
11015962400
Washer
Kenmore
11015962401
Washer
Kenmore
11015964400
Washer
Kenmore
11015964401
Washer
Kenmore
11016101690
Washer
Kenmore
11016101691
Washer
Pump Retainer
$9.62
In Stock
✖
Stock Status

In Stock

Item is in stock and is estimated to be delivered in 2-3 business days via Standard Shipping.

On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.