EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖
Sign In | Create Account
| Your Account

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos
Keep typing for more specific results...

Parts Departments

Top Model Types View All

Expert Repair Videos

Symptoms

Troubleshoot like a pro using your model's symptoms

View symptoms

Model Number Locator

Find your model number to unlock guaranteed fit

Find my model number

Articles & Guides

How to Fix a Samsung Dryer 3C Error Code - PartSelect

If a Samsung dryer is displaying a 3C error code, there is a communication issue with the motor and control board. In this article we’ll cover how to fix this issue.

How to Reset Your Bosch Dishwasher - PartSelect.com

A step-by-step guide to resetting a Bosch dishwasher. Learn what errors and issues a reset can fix, how to do a soft reset, and how to do a hard reset.

How to Fix an F11 Code on a Frigidaire Oven - PartSelect.com

Learn how to clear the F11 error code on your Frigidaire oven and replace the keypad overlay and electronic control board with our easy DIY how-to guide.

 See more articles & guides

Water Tube Kit W10823511

Official part for Kenmore, Whirlpool, KitchenAid, Amana

★★★★★
★★★★★
(8)

Really Easy 

30 - 60 mins 

Bestseller
Install video
11730901-1-M-Whirlpool-W10823511-Water Tube Kit
Part Location Diagram of W10823511 Whirlpool Water Tube Kit
See part 18 in the diagram
Replacing your Kenmore Refrigerator Water Tube Kit
11730901-1-S-Whirlpool-W10823511-Water Tube Kit 360 view
( Grid squares measure 1x1 inch )
11730901-1-S-Whirlpool-W10823511-Water Tube Kit 11730901-2-S-Whirlpool-W10823511-Water Tube Kit 11730901-1-S-Whirlpool-W10823511-Water Tube Kit 360 view
Part Location Diagram of W10823511 Whirlpool Water Tube Kit Replacing your Kenmore Refrigerator Water Tube Kit
Price Match
OEM badge Official OEM Part
$27.36
In Stock
Order now and your part arrives by Sep 3
 Fits your 1069450220!

About This Part

What it does. Why it matters. Everything you need to know for an easy fix.

Water Tube Kit Specifications

This is the replacement water tube kit for your refrigerator. This tubing is made of plastic, is 1/4 inch in diameter, and comes with 2 inserts. This tube may be longer than the original tube, and may need to be cut. This water tube transports water to the ice and water dispensers. If your refrigerator is leaking, or if the ice and water dispensers are not dispensing properly, you may need to replace this tube. This part is sold individually and is an OEM part sourced directly from the manufacturer.
Part #W10823511
Manufactured by Whirlpool for Kenmore, Whirlpool, KitchenAid, Amana

You May Also Need

Because heroes deserve fewer surprise re-installs.

$18.65
In Stock
$11.77
On Order
$20.36
Special Order
$22.52
In Stock
$28.42
In Stock
$18.22
On Order
$27.36
In Stock
$31.58
In Stock

Genuine OEM: Original Parts. Lasting Repairs.

Because quality isn't optional.

OEM stands for Original Equipment Manufacturer. This means that the company who made your appliance is also supplying the replacement part.

How Buying OEM Parts Can Save You Time and Money
Features OEM Generic
Genuine brand name
Guaranteed to fit
Superior Quality
Long term value

Part Videos

Watch our pros, then fix it yourself.

Replacing your Kenmore Refrigerator Water Tube Kit

Replacing your Kenmore Refrigerator Water Tube Kit

About this fix

Common problems and models this part fixes.

Really Easy 

30 - 60 mins 

Rated by verified customers

What this part fixes:
  • Leaking
  • Ice maker not making ice
  • Not dispensing water
Works with the following products:
  • Refrigerator
  • Ice Maker
  • Freezer
Part# W10823511 replaces these:
AP5989588, 1105233, 1108197, 1108348, 1111250, 1112556, 1113158, 1113159, 1113371, 1113372, 1119096, 2001259, 2001321, 2001322, 2155294, 2172593, 2174662, 2181940, 2181941, 2181942 , 2181943, 2181944, 2181945, 2181946, 2181947, 2181948, 2183156, 2202587, 2204332, 2205746, 2208933, 2210514, 2210517, 2223137, 2252393, 2304859, 2314045, 2314046, 2314047, 4339669, 4339975, 4340032, 4340070, 4341083, 4341084, 4342775, 4343701, 4344404, 4387492, 482003, 483202, 627665, 653200, 653415, 653499, 659811, 758037, 758581, 8170412, 8170934, 8208151, 831304, 836240, 836241, 839060, 839063, 840124, 840125, 840860, 842775, 844847, 845998, 849986, 849987, 867089, 867194, 867200, 937669, 937680, 937681, 939010, 939011, 940828, 944681, 977049, 977052, 983370, 987053, 988220, 992584, 992585, B5705311, B5705315, B5705323, W10175644, W10357068, W10357069, W10357076, W10437857, W10823511VP Show less

Customer Reviews

Real ratings from other people who bought this part.

Average Rating:

★★★★★
★★★★★
8 Reviews
3.9

Out of 5

  • 5 Stars
    5
  • 4 Stars
    0
  • 3 Stars
    1
  • 2 Stars
    1
  • 1 Star
    1

Search reviews left by others. DIY doesn't mean you have to do it alone. Use simple keywords like "fit", "broken", "easy", or "quality" to find reviews that match!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
  • 1
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Daniel F - July 1, 2019
  Verified Purchase
Easy Repair
I need the rubber gasket that goes around door. Your website states it’s “discontinued.” Just need to confirm that it no longer can be purchased. Thanks!
★★★★★
★★★★★
Jennifer I - December 20, 2020
  Verified Purchase
easy repair, great part
Nice tubing, even thicker than the one previously installed in fridge. Easy job but the video was very helpful as a reference as well. Needed a little oil to push thru the last part but otherwise a simple install.
★★★★★
★★★★★
DEBRA B - September 11, 2018
  Verified Purchase
Great part.
Part arrived super fast, however it was the incorrect part. I ordered the wrong part. The customer service rep was super helpful with my return and helping me figure out what I needed!
★★★★★
★★★★★
Robert T - December 25, 2018
  Verified Purchase
It was great
The part was the correct part
★★★★★
★★★★★
Melvin H - May 2, 2020
  Verified Purchase
Too easy
The part was exactly as ordered and I received it fairly quickly. The repair was too easy; it took longer to turn off and on the water supply than it did to replace the part! Thanks!
★★★★★
★★★★★
Mary G - March 16, 2019
  Verified Purchase
Repair was not so easy due to difference in front panel from video
Part was fine
★★★★★
★★★★★
Ronald H - May 16, 2019
  Verified Purchase
The part was entirely different than the original
The part was not at all like the original and no one there was aware of the difference nor were they informed of the different usage application and how installation varied from that of the original item
★★★★★
★★★★★
David L - May 19, 2020
  Verified Purchase
Part was not correct. Wrong fittings on both ends @
I had to order the part from a different source using the same information I provided you. Correct part arrived in two days and worked perfect.
  • 1

Repair Tips

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!

Really Easy 

30 - 60 mins 

Average repair rating from 9 real customers like you

Sort by:
  • 1

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sorry, we couldn't find any existing installation instruction that matched.
Parts were old
5 of 6 people found this instruction helpful.
  • Dito from LOS ANGELES, CA
  • Really Easy
  • 1- 2 hours
  • Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
Watched the video
Was this helpful?
Thank you for voting!
35 year old water tube became brittle and cracked; leaking water
8 of 10 people found this instruction helpful.
  • Melvin from OPELIKA, AL
  • Very Easy
  • Less than 15 mins
  • Screw drivers
Unscrewed clamp holding water tube to refrigerator ice maker. Pulled water tube from ice maker and water valve inlet. Cut the new tubing to the exact same length and inserted one end to the water valve inlet and the other end to the ice maker then screwed clamp holding water tube back to the refrigerator ice maker.
Was this helpful?
Thank you for voting!
Ice maker not making ice and water leaking from ice maker line
2 of 2 people found this instruction helpful.
  • James from BARTLETT, TN
  • Very Easy
  • 15 - 30 mins
  • Wrench set
Initially I though we had a bad water inlet value and possible ruptured/cracked water line to the icemaker. Once I replaced the water inlet value, water continued to leak from top connection of the hose into the ice water fill tube and at bottom connection into the dual water inlet value. I discovered by reading back through PartSelect's troubleshooting and answers that the problem might be the ice water fill tube. Once I removed it (2 screws and some tugging) it came right out. I saw that it was frozen solid with a plug of ice restricting water from filling the ice maker. I used my wife's hair dryer to melt the ice plug and reattach. Within 30 minutes we had our initial batch of ice. I did in the end have to replace the water line between the water inlet value and the ice maker to get the water leak repaired. I've returned the water inlet value to PartSelect for credit.

Great Job PartSelect from a satisfied customer
Read less
Was this helpful?
Thank you for voting!
ice maker leaking water, and not making ice
2 of 4 people found this instruction helpful.
  • Jason from CHAMPAIGN, IL
  • A Bit Difficult
  • 30 - 60 mins
  • Nutdriver
Remove the cardboard back cover and the vertical metal strip, all the screws are the same on the back. Remove the front bottom cover, those screws are all the same but longer. The tubing is bad because they tucked it in on the side and it rubbed and wore a hole in it. Remove the tubing nut. You may notice that there is an insert in the tubing, but the new tubing has no insert because it is thicker walled and does not the insert because it is stronger. The nut and compression ring are one piece. Open the front door and pull the tube out of the metal plate to the left, and cut the tube off at the end to remove the metal ring, and to make it easier to pull it out. Pull the tube out from the back, but first carefully remove the sticky gray putty, and put it aside. You might also bend the copper line to the right a little if it is putting pressure on the tube at the top of the unit. Now pull the tubing out, and use it to make the new tube the proper length, You might also want to first tape the new tube to the old tube to fish it through. I did not. It was tricky fishing the tube in from the back of the unit to the resevoir. If you do it my way, then aim it to the right. I got it on the second try and felt lucky. Once you get the tube in there, put the metal ring back on the new tube, and press it into the metal plate to the right. You can feel the groove and hole in the metal plate. I think the metal ring goes under the plate, but honestly I don't think you need the ring on the new tube because it has a thicker wall and is stiffer, so it won't pop out. Make sure you put the putty back in once you have completely installed the tubing. I think this is important to keep the tubing from sweating and to help keep the ice bin cold, like insulation. Do not put the tubing back along the left side of the unit, or you will be replacing it again, but maybe not with the thicker walled tubing. When you are all done, check to make sure your sump pump works by pouring water into the ice tub, if it is plugged in and you do not hear the pump, or the water backs up, then your pump may be bad. I also pulled a piece of white plastic out of the clear tubing just above the pump and never did find where that came from, but it would have been from the ice bin. I then ran a cleaning cycle and the instructions say if there was water still in the resevoir, then do another cleaning. My resevoir was full, so I did another cleaning. IF YOUR RESEVOIR IS FULL, THEN YOU NEED A NEW UPPER PUMP! Mine is on order. Mine was full after both cleanings, and after trying to make ice, I realized what the problem was. It could be that it is very clogged, but they don't appear to be serviceable, and I never heard it try to run. I did hear the lower pump, compressor, and fan all run previously, so I hope that when the new pump is installed, the unit is not low on refrigerant or anything like that. Fingers crossed, and good luck.
Read less
Was this helpful?
Thank you for voting!
water leaked when the paddel was pushed
6 of 8 people found this instruction helpful.
  • Monica from EDMOND, OK
  • Really Easy
  • 30 - 60 mins
  • Nutdriver, Pliers, Screw drivers
Followed the video on parts page. I was worried I would brake the cover but learned from the video the right way to remove the front plate. I found the video very informing. Thank you for saving me a service call and the part cost was minimal compared to a new refrigerator .
Was this helpful?
Thank you for voting!
Broken Water Nozzle at Door
1 person found this instruction helpful.
  • Chris from Brentwood, TN
  • Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
(1) Ordered PS371704 from PartSelect! Best advice EVER! (2) Unplugged refrigerator (since the water solenoid on the back of the refrigerator is powered to switch ON the water, you NEVER have to turn off the water!) (3) Pull off the refrigerator's bottom grill. (4) With a small saucer under the fittings, unscrew the black and white tube fitting. There is only one nut to remove on the white tubing side. You'll need to undo the compression fitting on the black tubing and slide off the compression nut. You'll need to MAKE SURE you keep these nuts and replace onto the black and white tubing the SAME WAY you took them off. You'll NOT need to use nut drivers as finger tight is the key. Too hard and you'll ruin these plastic nuts. You should get only about 1/8 cup or less of water during this whole exercise. (5) Cut off the old, broken water nozzle. (4) Find a screw of the appropriate size to fit tightly 1/2 way inside the new tubing (this is to ensure your old and new tubing are connected to feed through the door). If screw is not tight within the tubing, wrap part of a plastic (thin) sack around this screw a couple of times and force into the tubing. You'll, of course, then need to use the hacksaw to cut the head off the screw as you'll be forcing the other half of the screw into the old cut tubing (6) Chase the dog out of the kitchen and cajole your wife (significant other) to push the newly joined tubes through the top of the dispenser, through the door and out the bottom as you will be gently PULLING on this old tubing from the bottom until the new tubing pops through the doors bottom. (7) Once this new tubing is out, you will separate the old tubing and, using the nuts in the proper sequence, connect this new tubing to the white tubing. (8) Plug the refrigerator back in and test flow the water. Check to ensure the plastic nuts have no leakage ... button up the bottom grill ... and enjoy the fresh water! PS> Don't forget to praise the wife (significant other) and give the dog a treat for staying out of your face!!
Read less
Was this helpful?
Thank you for voting!
Water began to leak under the refrigerator. Source looked like it was coming from control valve suppling water to ice maker and water dispenser.
21 of 32 people found this instruction helpful.
  • jesse from hacienda heights, CA
  • Really Easy
  • 30 - 60 mins
  • Nutdriver, Pliers, Screw drivers
Followed instructions supplied. It was relatively easy and the parts fit exactly right. Sears wanted twice as much for the part and service would have charged me another $100 to come to my home. I saved over $100 doing the project myself.
Was this helpful?
Thank you for voting!
The Ice maker would not work.
22 of 42 people found this instruction helpful.
  • Jerry from Boulder, CO
  • Easy
  • 1- 2 hours
  • Screw drivers
We rolled the refrigerator out away from the wall and it was obvious where the break was located. We took out the old water spout for the ice maker and replaced the tube and the tubing from the solenoid. We turned it on and soon we had water dripping everywhere. We unloaded and defrosted the freezer which got all of the remaining ice that was stuck in there. We put everything back together. I read in some instructions in the manual that it might take 24 hours for the ice maker to reprogram itself and start producing ice. I was only about 12 hours and we had ice again and everything worked well. You really do not have to disconnect the water from the main line, the solinoid controls that part of operation and turns the water off until the ice trays are free and clear.

JLB
Read less
Was this helpful?
Thank you for voting!
water dispenser started leaking
71 of 108 people found this instruction helpful.
  • Trent from Tacoma, WA
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
i wasn't sure it was the inlet valve unit because the leak was at the water dispenser in the freezer door. after some research it looked like the water inlet valve located in the back lower part of the refrigerator was the problem. to replace, take off the cardboard cover, about 6 screws, you have access to the water inlet valve, disconnect the hoses (i think it goes without saying that you should have turned off the water to the frig) replace the inlet valve, connect hoses, turn water back on and you'll be back in business. very easy repair.
Read less
Was this helpful?
Thank you for voting!
  • 1

DIY Questions and Expert Answers

34 questions answered by our Repair Experts.

Ask our experts a question about this part and we'll get back to you as soon as possible!

We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
  • 1
  • 2
  • 3
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Rickey - For model number MSF25D2EAB00
December 22, 2017
I need the plastic water line that connects the main water line to the water filter housing,the small tapered end to the housing has a small hole and is leaking.I have replaced the housing.
Chris Boyle Profile
Hello Rickey, Thank you for your inquiry. The part number to the water filter inlet tube is WPW10281289, which brings the water into the water filter. Hope this helps!
7 people found this instruction helpful.
Was this helpful?
Thank you for voting!
Chrisie - For model number 106.56586500
January 23, 2020
What causes the fill tube for the ice maker freeze up? We have replaced the ice maker.
Chris Boyle Profile
Hello Chrisie, Thank you for the question. The Ice maker Full Tube freezing up can be caused by a frozen ice maker fill tube, faulty water inlet valve, too low freezer temperature setting, or a water filter that needs replacing. Hope this helps.
5 people found this instruction helpful.
Was this helpful?
Thank you for voting!
Lawrence - For model number ABC2037DTS
February 5, 2018
Water leaks under the front of my refrigerator. It happens when i activate the water dispenser inside the refrigerator. I have replaced the inlet water valve, and none of the exterior tubing is leaking. What else could be the cause for the leak, and what parts are available? Also there is a 2 to 5 sec interval when air comes out of the dispenser before the water flows. Could there be a leak in the tubing as it enters or exits the water filter?
Chris Boyle Profile
Hello Lawrence, thank you for your question. I would suggest checking Water Filter Head with Tubing part number WP67006524. There is a good chance the water is leaking from there. Also, be sure you are using a compatible filter in your appliance. Aftermarket filters can sometimes not fit properly, and leak. I hope this helps!
4 people found this instruction helpful.
Was this helpful?
Thank you for voting!
Charles - For model number ED2DHEXWB00
April 2, 2019
Can the water supply tubing that runs through the freezer door to the ice maker and water dispenser be replaced?
Chris Boyle Profile
Hello Charles, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11730901. Thank you for your inquiry, good luck with this repair!
3 people found this instruction helpful.
Was this helpful?
Thank you for voting!
Michael - For model number WRT771REYW00
October 3, 2017
Water leaking from back of freezer under the cold air outlet sheet of ice in freezer
Chris Boyle Profile
Hi Michael, Thank you for your question. There could be a couple of parts that would cause that issue. I would suggest looking at your ice maker and looking at the fill tube to the ice maker. It is possible that leaking is being caused because your fill tube is clogged with ice. Good luck with your repair.
2 people found this instruction helpful.
Was this helpful?
Thank you for voting!
Imani - For model number WRS322FDAB01
November 11, 2019
Does this part come with a filter or is a filter a part of the water/ice dispenser?
Chris Boyle Profile
Hello Imani, thank you for your question. The filter listed for this unit is PartSelect Number: PS11701542. It is attached into the filter housing, which then dispenses the water into ice maker and dispenser. I hope this helps.
2 people found this instruction helpful.
Was this helpful?
Thank you for voting!
Les - For model number PS11730901
February 6, 2020
Please tell me the length
Chris Boyle Profile
Hi Les. They are about 72 inches in length. Thank you for your question and good luck with your repair.
2 people found this instruction helpful.
Was this helpful?
Thank you for voting!
Gilbert - For model number ET21CMXJW00
April 24, 2023
Where is the drain for the defroster. During defrost the water trickles into the fridge where the cold air enters the fridge compartment from the freezer. Is there a drain tube and where is it located.
Chris Boyle Profile
Hi Gilbert, thank you for reaching out. The defrost drain hole is located in the freezer. In order to get access, remove the cover inside the freezer. Locate the defrost drain hole near the evaporator coil. Check if the drain tube is clogged or not. We hope this information is useful!
2 people found this instruction helpful.
Was this helpful?
Thank you for voting!
Mary - For model number 4200520 SubZero Ice Maker
April 15, 2022
Will this tubing fit my SubZero 700TFI, with part number 4200520 ice maker? It requires 1/4" OD tubing to fill the ice maker. Mine has melted in half due to heat. I am not looking for the ice maker kit that attaches to the water source in the wall to the freezer.
Chris Boyle Profile
Hello Mary, thank you for writing. We do have the part PS11747816 which is 1/4" Plastic tubing, 8 1/2 feet long. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
1 person found this instruction helpful.
Was this helpful?
Thank you for voting!
Antonio - For model number TFX24RL
March 18, 2018
I cannot find the water tube inlet (always associated with the number 16) for my refrigerator, just the valve. My refrigerator is leaking due to a problem on the tube inlet. How can I buy it or what alternative do you propose to fix the problem?
Chris Boyle Profile
Hello Antonio, Thanks for your question. The water inlet tubing is part number PS292347 for your model. I hope this helps.
$38.96
Special Order
Tube
1 person found this instruction helpful.
Was this helpful?
Thank you for voting!
  • 1
  • 2
  • 3

This Part Also Fits These Models

Don't see your model? Use our Fit Checker to confirm!

Check Part Fit
Part #W10823511
Brand
Model Number
Description
Kenmore
1064650042713
Refrigerator - Kenmore 1064650042713 Side By Side Refrigerator
Kenmore
1064650043713
Refrigerator - Kenmore 1064650043713 Side By Side Refrigerator
Kenmore
1064650043714
Refrigerator - Kenmore Refrigerator 1064650043714
Kenmore
1064650049713
Refrigerator - Kenmore 1064650049713 Side By Side Refrigerator
Kenmore
1064650049714
Refrigerator - Kenmore 1064650049714 Side By Side Refrigerator
Kenmore
1064651752714
Refrigerator - Kenmore 1064651752714 Side By Side Refrigerator
Kenmore
1064651753713
Refrigerator - Kenmore 1064651753713 Side By Side Refrigerator
Kenmore
1064651759713
Refrigerator - Kenmore 1064651759713 Side By Side Refrigerator
Kenmore
1064689482991
Ice Maker
Kenmore
10647021790
Refrigerator
Kenmore
10647021791
Refrigerator
Kenmore
10647022790
Refrigerator
Kenmore
10647022791
Refrigerator
Kenmore
10647028790
Refrigerator
Kenmore
10647028791
Refrigerator
Kenmore
10650022000
Refrigerator
Kenmore
10650022001
Refrigerator
Kenmore
10650022002
Refrigerator
Kenmore
10650022003
Refrigerator
Kenmore
10650022004
Refrigerator
Kenmore
10650027000
Refrigerator
Kenmore
10650027001
Refrigerator
Kenmore
10650027002
Refrigerator
Kenmore
10650027003
Refrigerator
Kenmore
10650027004
Refrigerator
Kenmore
10650029213
Refrigerator - REFRIGERATOR
Kenmore
10650032000
Refrigerator
Kenmore
10650032001
Refrigerator
Kenmore
10650032002
Refrigerator
Kenmore
10650032003
Refrigerator
Water Tube Kit
$27.36
In Stock
✖
Stock Status

In Stock

Item is in stock and is estimated to be delivered in 2-3 business days via Standard Shipping.

On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.