- Home
- ZGU48N4GH1SS
- Instructions
ZGU48N4GH1SS General Electric Cooktop - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
old switch would not turn off
12 of 19 people
found this instruction helpful.
-
NORMAN from THOMSON, GA
- Easy
- 15 - 30 mins
-
Pliers, Screw drivers
remove c clip, remove two wires
install new switch,
replace c clip, replace two wires
test
have a cup of coffee
install new switch,
replace c clip, replace two wires
test
have a cup of coffee
Was this helpful?
Thank you for voting!
inability of igniter to shut off
0 of 1 people
found this instruction helpful.
-
Darren from Redondo Beach, CA
- Really Easy
- Less than 15 mins
-
Screw drivers
removed cover, removed clip and exchanged part
Was this helpful?
Thank you for voting!
insert burner is broken
-
sherry from Raleigh, NC
- Really Easy
- Less than 15 mins
-
Screw drivers
replace insert burner
Other Parts Used:
Was this helpful?
Thank you for voting!
Broken gas line & missing cap
-
Frank from Jacksonville, FL
- A Bit Difficult
- More than 2 hours
-
Screw drivers, Socket set
Front control panel must be removed but left hanging on wires, remove kick panel at base of stove, locate and remove all screws that attach side of stove (either side) when all screws have been removed from side panel you can lift up about an inch and remove side panel thus giving you access to base of burners and attached gas lines; afte
... Read more
r replacing gas line i recharged the lines with gas and checked for leakage by using a grill lighter, (no leaks?) i re-installed the side panel, this was the most difficult part of the repair because the side panel must be properly placed and lined up
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!