ZDIS15CSSJ General Electric Ice Maker - Parts

This is a quarter tubing nut and is sold individually. The tubing nut works in conjunction with your refrigerator/freezer and is made entirely of plastic. The function of this part is to connect the lines that supply water to your ice maker and water dispenser. The most common reason or needing to replace this part is if fluid is leaking ...Read morefrom the water line to your icemaker or water dispenser. The tools you will need to make this repair include a nut driver, a pair of pliers, and a screwdriver set.

This water line 1/4, also known as a ice maker fill tube, is used in freezers and refrigerators. The tube directs the water into the ice maker cup during the cycle in which it fills the cup. The water line height is 0.6 inch and it weighs 0.1 lbs. As a safety precaution, unplug your appliance from the power source before installing this p...Read moreart. Remember to safely store food when it is removed from fridge or freezer. Refer to the installation instructions provided by the manufacturer for further guidance and accuracy.

This ice cutting grid is located behind the ice maker door. The cutting grid consists of thin, heated metal wires that slice the slabs of ice when they slide off the evaporator plate, creating the cubes that fall into the ice bin. When the cutting grid is broken or malfunctioning, the slabs of ice could stack, and the ice production cycle...Read more stops. Replace your existing cutting grid with this OEM replacement part when you discover that the part is not working properly. Remember to ensure that the power is disconnected from your refrigerator before you begin this repair.

The filter dryer filters refrigerant that travels through the sealed system of the refrigerator.

This board controls the operation of the unit. It is located in the control box.