- Home
- YWFES4530SW0
- Instructions
YWFES4530SW0 Whirlpool Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Broiler element EXPLODED!
-
Beth from Draper, UT
- Easy
- 15 - 30 mins
-
Screw drivers
Yes... it exploded. Ordered the part which was delivered promptly. Installed in about 30 minutes with a helper. Just unscrew the 4 interior screws and a bunch of the screws (10 maybe?) on the back panel. Drop the back panel, remove the electrical connections from the broiler element and have your helper pull it out. Shove the new one in c
... Read more
arefully through the insulation, attach the two electrical connections and reattach all the screws. Worked fine but smelled a bit as it burned off the new coating. About a 30 minute project.
Read less
Was this helpful?
Thank you for voting!
top element was burnt out small burn hole in element
-
Gregory from kissimmee, FL
- Really Easy
- 15 - 30 mins
-
Screw drivers, Socket set
removed the screws that were on back side of oven securing panel that covered element terminals disconnected wiring to upper element then went in side oven area removing 4 upper mount screws that were holding upper element in place then removed old element and reinstalled new in same order was removed..
Was this helpful?
Thank you for voting!