Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Charcoal Filter getting old, needed replaced
1 of 3 peoplefound this instruction helpful.
Richard L from PRESCOTT VLY, AZ
Easy
15 - 30 mins
Screw drivers
Removed the face plate above the door (2 Phillips screws.) Removed existing filter and replaced with the new one purchased. Reinstalled the face plate.
Was this helpful?
Thank you for voting!
Lightbulb burned out
1 of 4 peoplefound this instruction helpful.
Roland R from NORTH ANDOVER, MA
Very Easy
Less than 15 mins
Screw drivers
Removed one screw lowered glass cover removed burned out bulb replaced with new one put glass back reinstalled screw. Dune 5 minutes back in business
Was this helpful?
Thank you for voting!
On Turning on the Microwave, it was sparking, was not sure where the sparks are coming from, initially I thought mica at the end of megnatron duct could be the issue
0 of 1 peoplefound this instruction helpful.
RaviShankar from Artesia, CA
Easy
1- 2 hours
Pliers, Screw drivers
when I opened the back cover of microwave, the diode was kind of blackish blown, since there was light bulb and fan were still working, i thought it could be problem with any one of the components like; magnatron or capacitor or diode, so first replaced the diode and mica at the end of the magnatron duct, there was problem with door switc
... Read moreh as well. i fixed that too. Now it is working. It cooks bit faster, Wondering why?
Glass plate of Microwave missing from an in bulit microwave
0 of 1 peoplefound this instruction helpful.
Martin King from Silver City, NM
Really Easy
Less than 15 mins
Glass plate arrived in less than two days. Placed the glass plate in Microwave and presto the microwave works like a charm.
Was this helpful?
Thank you for voting!
glass turntable in microwave cracked in half while cooking
0 of 1 peoplefound this instruction helpful.
barbara from phoenixville, PA
Really Easy
Less than 15 mins
submitted manufacturer info to website and voila! a new glass turntable arrived in 2 days. I don't do well with computers, my 23 yr. old daughter was impressed......couldn't be easier! thanx! will definitely revisit your site
Was this helpful?
Thank you for voting!
Broken Microwave Glass Turntable
0 of 1 peoplefound this instruction helpful.
MICHELLE from BROOK, IN
Really Easy
Less than 15 mins
All I had to do was open the microwave door and place the turntable on the designated grooves, wha lah it fit. I am now back in business. Thanks to partselect, I found my replacement, ordered and it was shipped in no time.
Was this helpful?
Thank you for voting!
OTR microwave oven was missing the installation bracket
0 of 1 peoplefound this instruction helpful.
Rich Dudding from Miami, FL
Really Easy
Less than 15 mins
Screw drivers
I followed the manufacturer's installation instructions. Everything worked perfectly.
Was this helpful?
Thank you for voting!
broken
0 of 1 peoplefound this instruction helpful.
Donald from Pompano Beach, FL
Really Easy
Less than 15 mins
put the turntable in and had a Rum and Coke to celebrate. Your service was GREATTTTTT...
Was this helpful?
Thank you for voting!
Charcoal Filter Replacement
0 of 1 peoplefound this instruction helpful.
Charles from Meridian, MS
Really Easy
Less than 15 mins
Screw drivers
This is an under the counter microwave. Simply removed the two screws holidng the vent grille on top of the unit, lift out the old charcoal filter, clean the vent fan exit surfaces then replace the filter and put the vent grille back. Be careful to not drop either of the two screws after one is installed as you will have to take the gri
... Read morell off and start the screw installation again unless you have a magnetic to retrieve the dropped screw. An easy five minutes at most to change.
Read less
Was this helpful?
Thank you for voting!
Foreclosed home: parts were missing
0 of 2 peoplefound this instruction helpful.
OLIV from OAKLEY, CA
Really Easy
Less than 15 mins
Having the correct model number helps: Just place the parts in the microwave and it worked.
I was sent the wrong fuse by you. I had to procure a fuse in another manner. Very disappointing. The repair was simple. It just took longer because of the failure to send the correct fuse.
Was this helpful?
Thank you for voting!
Burnt Out Light Bulb Replacement
9 of 30 peoplefound this instruction helpful.
alfred from summerville, SC
Easy
Less than 15 mins
Screw drivers
Open compartment, installed bulb, closed compartment
Was this helpful?
Thank you for voting!
it was working fine and it stopped order a fuse and it wasn't the problem
0 of 4 peoplefound this instruction helpful.
Herb from Auburn, IN
A Bit Difficult
1- 2 hours
took it to Buttermore appliance in Auburn Indiana and he changed the fan and added another fuse
Was this helpful?
Thank you for voting!
Put the Fuse in, then plugged it in came on for a min then everything went out!!!!!
4 of 18 peoplefound this instruction helpful.
Stephen from SPRINGFIELD, WV
Very Difficult
1- 2 hours
Pliers, Screw drivers
Took the front off and behind a plate was the fuse, so I replaced it for what good that did!!!
Was this helpful?
Thank you for voting!
The star broke when trying to loosen the bolt at the top
JOHN from Marana, AZ
Difficult
More than 2 hours
I had to hammer out the broken star wrench tip then progressively drill the head off of the bolt. Once accomplished I could remove the door. I used a standard replacement screw I case I ever have to replace the door again. The manufacturer should use a fastener other than a star head bolt.
My Orders
