My Orders
- Home
- XSS25GYPHCFS
- Instructions
XSS25GYPHCFS General Electric Refrigerator - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Defroster fan burned up
3 of 6 people
found this instruction helpful.
-
Peter M. from Lincoln Park, NJ
- Easy
- 30 - 60 mins
-
Nutdriver, Pliers, Screw drivers, Socket set
First I removed the ice tray rack lifting it out of the way to reach the back cover of the fan. Then, the whole back inside panel had to be removed. Two screws removed the fan and bracket from the freezer unit. The missing bumper lid just snapped into place. Replaced everything in reverse order. Pretty easy job.
Was this helpful?
Thank you for voting!
My bottom drawer in my GE refrigerator was broken.
2 of 3 people
found this instruction helpful.
-
Vernon from NEW PRT RCHY, FL
- Very Easy
- Less than 15 mins
Pulled out broken drawer and inserted new drawer...just that simple!
Was this helpful?
Thank you for voting!
I dropped one of the trays and it hit the light switch and broke off!
2 of 3 people
found this instruction helpful.
-
Cyndy from Rancho Cucamonga, CA
- Really Easy
- Less than 15 mins
-
Screw drivers
It was so darn easy! Took less then 10 minutes to fix. Self explanatory no instructions needed! Very cool!
Was this helpful?
Thank you for voting!
Grill broke removing refer for flooring
10 of 27 people
found this instruction helpful.
-
Ned from Goleta, CA
- Really Easy
- Less than 15 mins
-
Screw drivers
Easy order, fast delivery, two screws, done.
Was this helpful?
Thank you for voting!
The Light Would Not Go On
3 of 6 people
found this instruction helpful.
-
Steve from Littleton, CO
- Really Easy
- Less than 15 mins
Knew the switch was bad. Researched on the internet how to fix. Used a steak knife to pop the old one out, changed the contacts to the new switch and popped it back in. It took longer to open the box than it did to replace the switch. And the part arrived 2 days after I ordered it.
Was this helpful?
Thank you for voting!
Ice dispenser did not dispense ice
2 of 4 people
found this instruction helpful.
-
brian from montgomery, TX
- Really Easy
- Less than 15 mins
Ordered the part on a Tuesday and received the NEXT day. Slid out the damaged part and then slid in the new part!!! Excellent Service from your company and will recommend highly!!!
Was this helpful?
Thank you for voting!
broken shelf face
4 of 10 people
found this instruction helpful.
-
Rick from Vacaville, CA
- Really Easy
- Less than 15 mins
+The shelf face has little plastic locator clips that snapped off. the shelf face just comes off with a light lift of these two clips and a slight upward pull then lift up and off. The new one slips on with the top slipping onto the top rail of shelf, then push the bottom tow clips over the bottom rail of the shelf. There you have it smoo
... Read more
th as glass.
Read less
Was this helpful?
Thank you for voting!
The switch was loose ( no spring). The lights did not work.
1 person
found this instruction helpful.
-
Michael from PALMYRA, VA
- Really Easy
- Less than 15 mins
-
Pliers, Screw drivers
Unplug the refrigerator. Gently pry old switch out with screw driver. Move wires to connector on new switch with needle nose pliers. Pop it back into the hole. Plug back in. Peek inside to see the lights working.
Was this helpful?
Thank you for voting!
The existing dairy door came lose fell and brokeon tile floor.
1 person
found this instruction helpful.
-
Frederick from GEORGETOWN, TX
- Very Easy
- Less than 15 mins
The new part installed without problem always had great service
Was this helpful?
Thank you for voting!
replaced broken dairy door
1 person
found this instruction helpful.
-
dan from OROVILLE, CA
- Really Easy
- Less than 15 mins
Took 2 seconds to replace door
Was this helpful?
Thank you for voting!
dairy door broken.
1 person
found this instruction helpful.
-
carol from LAUREL, MD
- Very Easy
- Less than 15 mins
ordered a new one; took 1 second to put in.
Was this helpful?
Thank you for voting!
I’ve bucket didn’t function properly
1 person
found this instruction helpful.
-
Stephen from CINCINNATI, OH
- Very Easy
- Less than 15 mins
I pulled out the old drawer and installed the new one.
Then dumped thrice from the old drawer into the new one.
Then dumped thrice from the old drawer into the new one.
Was this helpful?
Thank you for voting!
The cover pan glass slipped out and shattered into the kitchen sink.
1 person
found this instruction helpful.
-
Dolores from POULSBO, WA
- Very Easy
- Less than 15 mins
The glass just slipped back into the spot perfectly. Thank you so much.
Was this helpful?
Thank you for voting!
Cracked dairy door
1 person
found this instruction helpful.
-
Robert from FORT BRAGG, CA
- Very Easy
- Less than 15 mins
Clear plastic dairy door snaps into placed at the hinge . No tools required.
Was this helpful?
Thank you for voting!
part broke
1 person
found this instruction helpful.
-
Jose from PASCO, WA
- Really Easy
- Less than 15 mins
-
Socket set
remove three bolts, installed the new part and was all done
Was this helpful?
Thank you for voting!