XSS23GYPECFS General Electric Refrigerator - Parts

This part is the replacement fresh food lever for your refrigerator. It is also known as the door closer lever, and it is made of black plastic. It is approximately 3 inches long and 1 inch wide. The fresh food lever works with the cam and the spring and helps with the opening and closing of the door. If the lever is damaged and the door ...Read moreassist isn’t working properly, you may need to replace it. You will find the lever at the bottom of the refrigerator, behind the grate. This part is sold individually and is an OEM part.

Includes the wiring harness and thermistor. This evaporator fan motor is located in the back of the freezer, and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circulated.

Sold individually.

This is a 12-24 TT HX 7/8 S refrigerator or freezer screw. It is a little over 1 inch in total length. This is sourced directly from the original manufacturer.

This water inlet valve is sourced directly from the manufacturer to ensure the best fit with your refrigerator. The water inlet valve is responsible for controlling the flow of water into the water dispenser and ice maker. It is typically located at the back of the refrigerator and is connected to the household water supply line. It opens...Read more to allow water to flow into the refrigerator and once the desired amount of water has been dispensed or the ice maker water reservoir has been filled, the valve closes to stop the flow of water. The water inlet valve will need to be replaced if it is physically damaged or otherwise faulty.

This bypass filter plug is an authentic OEM replacement part designed for your refrigerator. It is small component that is used in the water filtration system. It creates a direct path for water to flow without going through the filter, ensuring that the water dispenser and ice maker continue to function even when the filter is not in use...Read more. If the filter is old or clogged and needs replacement, or if you prefer not to use a filter for any reason, you can insert the bypass filter plug into the filter housing to continue using your fridge.

The ice maker fill cup directs the water into the ice maker cube mold during the fill cycle.