XSS23GGPECWW General Electric Refrigerator - Instructions

Poped whole switch out with flat head screw driver. Removed wires with needle nose players and held the wires so they wouldn't get pulled back inside fridge shell. Attached wires to new part like a plug. Lights ccame back put new switch back inside wall. Shut door

The light switch was accidentally broken. I looked it up on your site and found the part. I ordered it and switched it out in a matter of minutes. It also helped having people who purchased their switches from the site explain how they repaired their switches with relative ease.

Took out old, inserted new. Less than 5 minutes. Easy to find part on website. Quick delivery.

Used a 2" putty knife to lift off the old switch. Disconnected the broken switch and replaced it with the new one. Took about 1 minute.

I wish I could say differenet but it was very easy just a bit of pressure on on side an the dairy door snap in place.Thank you for following up

frig ran to much and pump on to long noticed light switch sticking when door was opened replaced the light switch took care of the problem the switch controlles more than just the light popped out with a screwdriver careful to find the side of it that has the retainer clip on it and the direction of the switch in correct position so it g ... Read more oes off when you close the door flat side facing the back a 2 minute job at most

Easy. Followed the video instrucations. the part was right there next to the compressor.

Used screw driver to lightly remove the old switch. Disconnected the 2 electrical leads to the old switch, then I connected those leads to the new switch. The light immediately came back on and I placed the switch into its housing hole and popped it in place. It works perfectly now. My wife said "let there be light"! Very easy install ... Read more ation. Thanks.

repair went great, snap out snap in, less then 2min

its not the repair we live in the last town of n h and I broke the dairy door of my refrigerator in millions of peace I found your site in the middle of the afternoon order the parts and the next morning the part was there we pay for over night deleverie and it always come couple day after never never see a company like yours thank you fo ... Read more r your site I tell every bodies about you

No tools needed - simply a middle hydrator drawer replacement. Pulled out old (broken) drawer and slid in new replacement.

i followed all the other submited solutions. really easy. popped out the broken light switch with thin tip screwdriver. careful not to let wires slip into compartment. then attached wires as i pulled them off broken switch. then carefully pop the new switch back in the slot. when i was younger i worked for an appliance repair company. i f ... Read more elt confident in this repair.

I reached into the refrigerator top shelf for the bottle of milk and my arm caught on the Dairy Door and pulled it from the door and it fell to the floor and shattered. Thanks to you I was able to order another. After couple of weeks, I asked my wife, Rita if we received the Dairy Door. She said, "Oh yes. I installed it already." Boy ... Read more was I surprised. Rita doesn't do installations!!!! Thank you, Thank you, Thank you.

Watched a youtube on capacitors- though on a motor with a pulley, the symptoms were the same, motor running and pulley not turning-bad capacitor. Took a chance for a 17+ dollar part vs a new compressor. It worked.

We just pried off the fan blades and pushed on the new part. Could not have been easier. The rat has been permanently dipatched and, hopefully, that is that.