This compression ring is meant to hold the evaporator fan motor in place in the freezer compartment of your refrigerator. This is is a genuine OEM part. The tools needed to complete this repair are a Phillips screw driver and small flat blade screw driver. Be sure to turn off your refrigerator before removing the evaporator fan cover so t...Read morehe fan does not turn on during repair. It is recommended to check the grommets, evaporator fan, and fan blades during repair in case they also need replacning. The compression ring may need replacing if the fan is noisy, or the refrigerator compartments are too warm. This part is sold individually.
This part is the replacement door handle fastener for your refrigerator. It is made of white plastic and metal, is sold individually, and measures approximately 1-1/4 inches by 1 inch. The door handle fastener allows you to connect your door handle to the refrigerator door. If your door handle is loose or missing, this is the part that wi...Read morell replace it. This part is an authentic OEM part sourced directly from the manufacturer.
This part helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer. This part has been updated by the manufacturer and may appear different than the original, but should function the same.
This evaporator fan blade is for your refrigerator, and it circulates air so that the temperature of the fridge is regulated. This model has 3 blades, and is a little more than 4 inches in diameter. It is made of white plastic and is sold individually. If your refrigerator is noisy and you hear a clicking sound, it is a good indication th...Read moreat the evaporator fan blade is warped or damaged. If the fridge or freezer sections become too warm, the fan could be to blame as well.
This refrigerator door bin is a functional storage accessory designed to attach securely to the interior of the right-hand door. Ideal for organizing jars, bottles, and other small items, it helps maximize usable space within the appliance. Made from durable plastic, it offers a snug fit and reliable performance. Installation is straightf...Read moreorward—refer to your refrigerator’s owner’s manual for step-by-step guidance. This bin is compatible with select models and serves as a direct replacement for damaged or missing door bins.
This water inlet valve is sourced directly from the manufacturer to ensure the best fit with your refrigerator. The water inlet valve is responsible for controlling the flow of water into the water dispenser and ice maker. It is typically located at the back of the refrigerator and is connected to the household water supply line. It opens...Read more to allow water to flow into the refrigerator and once the desired amount of water has been dispensed or the ice maker water reservoir has been filled, the valve closes to stop the flow of water. The water inlet valve will need to be replaced if it is physically damaged or otherwise faulty.
This bypass filter plug is an authentic OEM replacement part designed for your refrigerator. It is small component that is used in the water filtration system. It creates a direct path for water to flow without going through the filter, ensuring that the water dispenser and ice maker continue to function even when the filter is not in use...Read more. If the filter is old or clogged and needs replacement, or if you prefer not to use a filter for any reason, you can insert the bypass filter plug into the filter housing to continue using your fridge.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
lower pull out drawer handle fastener to freezer was broken on one side.
11 of 12 peoplefound this instruction helpful.
David from BENICIA, CA
Very Easy
Less than 15 mins
Screw drivers
I ordered the plastic fastener, that held the handle to the freezer door. after I received the part I used a screw driver to attach the fastener to the door. Then I placed the handle onto the fastener and bumped the handle with my hand to the left. this attached the handle to the door.
Was this helpful?
Thank you for voting!
Spring on Articulating mullion was broke causing manual shutting of door.
11 of 13 peoplefound this instruction helpful.
Todd from EOLIA, MO
Very Easy
Less than 15 mins
Screw drivers
Literally took the two Phillips head screws out of the middle hinge, disconnect the wire, slide old one off. Plug in new plug, slide new one on replace screws. Less than 5 minutes.
Was this helpful?
Thank you for voting!
Fridge keeps cycling on and off and a clicking sound happens every time compressor cycles.
10 of 11 peoplefound this instruction helpful.
Kirk E from GRASS VALLEY, CA
Easy
Less than 15 mins
Screw drivers
I opened the back panel of the fridge and exposed the compressor. Unplugged existing run capacitor and installed new one with the addition of the sleeve that is stated must be installed around the run capacitor. Everything I read and on this web site says that based on these symptoms, that the problem is the run capacitor. I search
... Read moreed and search for a part called a start relay which plugs in to the compressor. This run capacitor plugs in to this other part which I take as the start relay.
Installing this run capacitor did not solve the problem. The fridge compressor keeps cycling on and off. Freezer doesn't keep as cold as it should.