WUI75X15HZ02 Whirlpool Ice Maker - Parts

This genuine OEM replacement part is a water filter for your fridge or freestanding ice maker. The filter is used to remove contaminants and particles from the water, to ensure a clean and fresh taste. The filter should be replaced every six to nine months, or after 2000 gallons of water have passed through, whichever occurs first.

This is a light switch for your refrigerator. It activates when the door of your appliance is opened, and it will turn the light inside on and off. You will need to replace this part is if your light is not working properly. In order to make this repair you will need a Phillips screwdriver, a pair of needle nose pliers, and a small flat b...Read morelade screwdriver. This light switch is almost 2 inches long, 1.5 inches wide, and just over an inch thick.

This ice maker bin temperature sensor is a precision component designed to monitor and regulate the temperature within the ice storage compartment of select refrigerators. By continuously detecting temperature levels, it communicates real-time data to the appliance’s electronic control board, helping to optimize ice production and prevent...Read more issues such as excessive melting or overfilling. Constructed for reliability, this genuine OEM part is compatible with a range of models from Whirlpool, KitchenAid, Maytag, and other affiliated brands. Proper installation ensures consistent ice quality and efficient operation—model verification is recommended prior to purchase.

Sold individually.

Sold individually.

The water distributor tube distributes water from the reservoir to the evaporator plate.

Sold individually. The size of this screw is 1/4" hex head and 10-12 x 1/2".

Used with freestanding ice cube makers.

This is a condenser fan motor for your refrigerator/freezer. This fan motor is most commonly used with frost-free refrigerators with a condenser coil. It controls the rotation of the condenser fan blade. When the compressor runs, so does this fan, circulating air through the refrigerator grille, cooling the compressor and condenser coils....Read more This fan motor also helps to evaporate excess water in the drain pan. This model is all white in color, and is roughly 4 inches long, 3 inches wide, and 3.5 inches thick.

This ice maker scoop is an OEM refrigerator part designed to retrieve ice from the ice maker bin. It is made of plastic and measures approximately 10 3/4 inches in length and 4 inches in width. The scoop is designed to fit inside the ice bin for easy access. You will need to replace the scoop if it is cracked, broken, or lost. Discard the old scoop and insert the new one into its designated compartment.

This ice maker reservoir drain pump assembly is designed to efficiently remove excess water from the reservoir, ensuring proper drainage and preventing leaks or water accumulation. Activated after the defrost cycle or flushing protocol, the pump expels residual water to maintain internal dryness and support optimal cooling performance. It...Read mores role in preventing pooling helps protect the appliance from potential water damage and contributes to consistent ice production. Constructed for reliable operation, this component is essential for maintaining the overall functionality of the ice machine and is suitable for select models. Replacing a faulty pump can restore proper drainage and prevent operational issues caused by excess moisture.

This circulation pump helps form ice by circulating water over the evaporator plate. Designed for select ice makers, it ensures reliable performance.