This splutch cam kit is a genuine replacement assembly designed for select Whirlpool, Maytag, and affiliated brand washing machines. It plays a critical role in the wash and spin cycles by engaging the drive motor to rotate the washer basket. The kit includes the clutch assembly, cam ring, spring, basket drive gear, pulley, and mounting n...Read moreut. Replacing this component can resolve issues such as noisy operation, slow or failed spinning, poor agitation, and excessive moisture in clothes after a cycle. In some cases, a burning smell may also indicate a failing clutch. Installation requires basic tools and should be performed with the appliance disconnected from power. Compatibility should be confirmed using your washer’s model number.
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is an 18 ml, or.6 fluid ounces, bottle of touch-up paint. It also features a brush for easy application. This quick-drying, long-lasting paint...Read more is perfect for fixing any nicks, scratches, or chips on the exterior of your appliance. This paint is white in color, and provides a durable finish.
Affresh Washing Machine Cleaner includes three slow-dissolving tablets that help remove odor-causing residue from inside the washer. Suitable for all washer brands, including high-efficiency (HE) machines, the formula is also septic-safe. Place one tablet directly in the empty wash basket and run the Clean Washer cycle, or use a normal cycle with hot water. Use monthly or every 30 wash cycles for best results.
This washer lid lock assembly is designed for top-load washing machines and ensures the lid remains securely closed during wash and spin cycles. It replaces worn or malfunctioning latches, helping prevent the machine from starting or pausing when the lid isn’t properly shut. The assembly includes the solenoid mechanism that engages the lo...Read moreck, contributing to safe and efficient operation. Compatible with a wide range of models, it’s an ideal solution for restoring reliable performance to your appliance.
Appliance spray paint is a great way to cover up any chips and scratches that have appeared on your appliances. Instead of replacing the part entirely, this is an easy fix. This is also a great way to give a fresh new look to any handles or areas that have discoloring due to wear. Make sure to clean the area before you begin and wear a pr...Read moreotective mask for safety. Give the can a good shake and spray a few inches away from the surface. Apply the paint until the area is fully covered as desired. Wait until the paint has dried before using the appliance.
This start capacitor is a key component in your top-load washer, providing the initial voltage surge needed to start the motor and keep the appliance running smoothly. If your washer won’t start or fails to agitate, the capacitor may be faulty and require replacement. Designed for compatibility with select models, this genuine replacement...Read more part helps restore reliable performance. Always disconnect power before installation and consult your washer’s manual to confirm fit.
This part is used to extend washing machine drain hose approximately 4 feet. You may also require the connector (PartSelect Number PS334663) to connect the extension to the existing drain hose.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Yolonda - For model number WTW5100HC3
September 16, 2025
It shows a code #F7E1
Hi Yolonda, thank you for reaching out. This code indicates that the motor can not achieve the correct speed for the cycle selection. We would suggest checking the control board, part number PS16745107. It acts as the brain of the washer, controlling and coordinating all of its functions. You may need to replace it to fix the issue. We hope this solves your problem!
Replaced door lock and door lock switch. Code F5E3
Hi MJ, thank you for reaching out. As you have already replaced the door lock and switch, the issue could be with the control board, part number PS16745107. You may need to replace it to fix the issue. We hope this sorts out your problem!
Does this machine have a lint filter, and if so, how do I access to clean it? I looked online and it said look under the agitator, so I removed the agitator, and there was a little lint around the die-cast spud, but not a filter. Every six months or so I have to snake the wall drain because it gets clogged with lint.
Hi George , thank you for the question. According to our research, your model comes with the drain filter, part number PS16660526, which is located under the inner tub. You may need to remove the inner tub to access the drain filter. We hope this helps!
I have a piece I am looking for for the actual lid. Not the latch, I need that too but it is the piece that is clipped to the inside of the lid itself. I found it on here once before it is a little round piece that has a latch piece on it connected with a spring, but I can't find it this time.
HI Nadine, thank you for contacting us. It seems that you are looking for the lid strike, part number PS16218028. The lid assembly for your model is part number PS12745388. We hope that helps!
Washer will wash but will not advance to the spin cycle during a normal cycle but works fine on the “quick cycle”.
Hi Joann, thank you for getting in touch. Ensure that the door latch is working properly. If it is fine, the issue could be with the shift actuator, part number PS16221077. It shifts the machine from agitating to spinning; if it fails, the machine will often get stuck at the end of the wash cycle. You may need to replace it to fix the issue. We hope this solves your problem!
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Noise, grinding sounds. Wash tub stopped turning but motor and cycles kept functioning. Process of elimination, must be the clutch assembly.
71 of 107 peoplefound this instruction helpful.
David from BLOOMINGTON, IN
Easy
30 - 60 mins
Screw drivers, Socket set
Easy, just followed the repair video. Recommend also ordering the drive belt. Bought one locally during my repair.
Was this helpful?
Thank you for voting!
Making loud noises.
20 of 29 peoplefound this instruction helpful.
Roy from BROOKLYN, NY
Really Easy
30 - 60 mins
Nutdriver, Pliers, Screw drivers, Socket set
The video you sent me was very helpful told me the exact tools I needed and how to do it. Thank you
Was this helpful?
Thank you for voting!
Scratches in Surface
83 of 227 peoplefound this instruction helpful.
Michelle from Richardson, TX
Really Easy
Less than 15 mins
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
My Orders
