This splutch cam kit is a genuine replacement assembly designed for select Whirlpool, Maytag, and affiliated brand washing machines. It plays a critical role in the wash and spin cycles by engaging the drive motor to rotate the washer basket. The kit includes the clutch assembly, cam ring, spring, basket drive gear, pulley, and mounting n...Read moreut. Replacing this component can resolve issues such as noisy operation, slow or failed spinning, poor agitation, and excessive moisture in clothes after a cycle. In some cases, a burning smell may also indicate a failing clutch. Installation requires basic tools and should be performed with the appliance disconnected from power. Compatibility should be confirmed using your washer’s model number.
This is lid lock designed for use within various washing machines. This lid lock, also known as a latch assembly, is used to secure the lid of your washing machine during the washing cycle. If your washing machine is experiencing issues starting or if the lid is not securing, this lid lock assembly likely needs to be replaced. This lid lo...Read moreck attaches underneath the top portion of your washer and its wire harness connects to the rear of the appliance. To replace this assembly, you will need a screwdriver, flathead screwdriver or putty knife, and wrench. This lid lock is an OEM part that is sold individually and does not come with any other parts or accessories.
This water inlet valve is for washers.
The water inlet valve controls the water flow into the washer.
Unplug the washer and shut off the water supply before installing this part. Wear work gloves to protect your hands.
This 6-pin shift actuator is an authentic OEM part supplied directly by the manufacturer for use in washing machines. The shift actuator is responsible for controlling the movement of the washer transmission during the different phases of the wash cycle. This allows the washer to switch between agitating and spinning modes. Signs of a fau...Read morelty shift actuator include the washer failing to agitate or spin, incomplete cycles where the washer gets stuck in one phase, or unusual noises during operation
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is an 18 ml, or.6 fluid ounces, bottle of touch-up paint. It also features a brush for easy application. This quick-drying, long-lasting paint...Read more is perfect for fixing any nicks, scratches, or chips on the exterior of your appliance. This paint is white in color, and provides a durable finish.
Affresh Washing Machine Cleaner includes three slow-dissolving tablets that help remove odor-causing residue from inside the washer. Suitable for all washer brands, including high-efficiency (HE) machines, the formula is also septic-safe. Place one tablet directly in the empty wash basket and run the Clean Washer cycle, or use a normal cycle with hot water. Use monthly or every 30 wash cycles for best results.
Appliance spray paint is a great way to cover up any chips and scratches that have appeared on your appliances. Instead of replacing the part entirely, this is an easy fix. This is also a great way to give a fresh new look to any handles or areas that have discoloring due to wear. Make sure to clean the area before you begin and wear a pr...Read moreotective mask for safety. Give the can a good shake and spray a few inches away from the surface. Apply the paint until the area is fully covered as desired. Wait until the paint has dried before using the appliance.
This drive belt connects the washing machine’s motor to the system, helping spin the basket. If the washer is having trouble spinning, the belt may need replacement. Ensure compatibility before ordering and unplug the washer before installation.
This Affresh Washing Machine Cleaner deep cleans to help remove the odor-causing residues and grime that daily loads leave behind. The time-release tablets are EPA Safer Choice certified, septic-safe and designed to clean inside all machines, including HE (High Efficiency). Use monthly or every 30 cycles for a consistently clean machine.
This is a genuine suspension rod kit for your washer. Suspension rods are used within the overall structure and support of the washer drum and keep it from shaking excessively during the washing cycle. This kit includes four suspension rods that each measure 26.5 inches long, with hooks on one end. If your washer is shaking significantly ...Read moremore than usual when in operation, the suspension rods are one culprit that if damaged or bad, will need replacing. If only one suspension rod is damaged, it is important to replace all four at the same time because they all wear evenly, and eventually another will break. This is an OEM kit that only includes the four rods and its connecting parts.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
2
3
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jane - For model number WTW4855HW3
February 8, 2025
I run the wash and it does not turn off (doesn't spin but makes a loud noise).
Hello Jane, thank you for your question. These symptoms sound like a faulty Shift Actuator PS11769864. Signs of a faulty shift actuator include the washer failing to agitate or spin, incomplete cycles where the washer gets stuck in one phase, or unusual noises during operation. We hope this helps.
AT THE END OF THE CYCLES IT MAKES A VERY LOUD NOISE, WHAT PART DO I HAVE TO BUY TO FIX THE PROBLEM
Hi Damaris,
Thank you for your question. If the washer makes a loud sound at the end of the wash cycle, it may becoming from the shift actuator. The shift actuator is responsible for controlling the movement of the washer transmission during the different phases of the wash cycle. This allows the washer to switch between agitating and spinning modes. If the washer fails to agitate or spin, if a cycle fails to complete, or there are unusual noises, then the shift actuator should be replaced. The part number for the shift actuator is PS11769864. We hope this helps!
After wash cycle completes, it continues to drain or pump water… constantly. Hours. Smelled like burning. Unplugged it. Investigated the pump, there was a Bobby pin in it. Re assembled, everything seems to function but it still constantly pumps. Any suggestions?
Hi Kendal, thank you for reaching out. Based on our understanding, we would suggest checking the main control board, part number PS16744865. It manages various functions and cycles, ensuring the appliance works efficiently and facilitates user interaction through control settings. You may need to replace it to fix the issue. We hope this solves your problem!
Hi Anthony,
Thank you for your question. If your washer is draining and filling at the same time, we recommend checking the water inlet valve and the water level switch. Before removing and checking these parts, please unplug the washer from the electrical outlet. For the water inlet valve, you will need to test it for continuity with a multimeter on the Rx1 setting. You should receive a reading of 500 to 1500 ohms. If you receive any other readings you will need a replacement water inlet valve. For the water level switch, visually check it for signs of cracking, fraying, wear, or damage. If you find any of these signs, you will need a replacement water level switch. We hope this helps!
The water doesn’t drain properly and in some cases water doesn’t even get to all the clothes. The clothes when cycle is done is always wet with signs of water still within the washer
Hi Mohammed, thank you for reaching out. The issue is likely related to the washing machine's drain system. Common causes include a clogged or obstructed drain hose, or a faulty drain pump. First, inspect the drain hose for any kinks, clogs, or obstructions. Ensure it's properly installed and not pushed too far down the drain pipe. If it is good, the drain pump itself might be malfunctioning and need to be replaced, the part number is PS11770076. We hope this sorts out your problem!
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Noise, grinding sounds. Wash tub stopped turning but motor and cycles kept functioning. Process of elimination, must be the clutch assembly.
71 of 107 peoplefound this instruction helpful.
David from BLOOMINGTON, IN
Easy
30 - 60 mins
Screw drivers, Socket set
Easy, just followed the repair video. Recommend also ordering the drive belt. Bought one locally during my repair.
Was this helpful?
Thank you for voting!
Water would not fill the washer except for 4 inches.
38 of 52 peoplefound this instruction helpful.
Patricia from MURPHYSBORO, IL
Really Easy
Less than 15 mins
Nutdriver, Screw drivers
Once we put in the new Water Inlet Valve, the auto sensor works now and I can wash any size load
Was this helpful?
Thank you for voting!
latch switch was not working
28 of 43 peoplefound this instruction helpful.
John from BEAVER DAMS, NY
Really Easy
30 - 60 mins
Nutdriver, Screw drivers
unfasten top from back, slide top forward and lift up, remove switch and cable (one piece), in stall new switch and cable, put top down and slide back, reinstall screws.
My Orders
