My Orders
- Home
- WRT549SZDM05
- Instructions
WRT549SZDM05 Whirlpool Refrigerator - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Cheap plastic part prone to break if crisper drawer jams even slightly.
1 person
found this instruction helpful.
-
Edward from SILVER SPRING, MD
- Really Easy
- 30 - 60 mins
-
Nutdriver
After left side track broke 3 times and then center track also broke, I got tired of buying replacements (even though they are easy to install and not very expensive). So I bought a tube of plastic epoxy and a bit of fiberglass cloth and reinforced the plastic that the (#8 x 1/2 inch) screws go through (where it breaks) on ALL 3 tracks,
... Read more
then redrilled holes, added a washer, and used #8 x 5/8 inch screws). Maybe these wiil last.
Read less
Was this helpful?
Thank you for voting!
freezer became frosty but refrigerator's camera didn'thave any coll at all.
1 person
found this instruction helpful.
-
Yakov from BROOKLYN, NY
- Really Easy
- 30 - 60 mins
-
Screw drivers, Socket set
After describing my problem PartSelect consultant emmidiately diagnost the problem and I ordered Evaporator Fan Motor. Along with purches order confirmation I got video how to install a new motor.
The hardest part was to connectthe ground wire becase space in that area was verylimited. Otherwise it was just like a walk in the park. ... Read more r />As soon as I installed motor and turned on the refrigirator, everything start working properly.
Thank you PartSelect, you sved me hundreds of dollars.
The hardest part was to connectthe ground wire becase space in that area was verylimited. Otherwise it was just like a walk in the park. ... Read more r />As soon as I installed motor and turned on the refrigirator, everything start working properly.
Thank you PartSelect, you sved me hundreds of dollars.
Read less
Was this helpful?
Thank you for voting!
Bottom part of refrigerator wasn't getting cold
1 person
found this instruction helpful.
-
Chad from RIDGEFIELD, NJ
- Really Easy
- 30 - 60 mins
-
Pliers, Screw drivers, Socket set
$80 part motor fan replaced saved me $1000 or more on new fridge.
Called in and you guys helped out
You guys are the best.
Called in and you guys helped out
You guys are the best.
Was this helpful?
Thank you for voting!
Not enough cold air in refrigerator
1 person
found this instruction helpful.
-
RICHARD from VENICE, FL
- Easy
- 30 - 60 mins
Remove food from freezer shelf and ice maker back panel4 screws remove old motor replace with new motor reinstall all removed parts. Plug in and fan instantly came on refrigerator working great since
Was this helpful?
Thank you for voting!
compressor not running
1 person
found this instruction helpful.
-
Doug from Lancaster, CA
- Really Easy
- 15 - 30 mins
Removed the access panel on back of unit located the Run Capacitor on the compressor and removed the bad one and put the new one on and pugged refrigerator back in and it started up and works fine now
Was this helpful?
Thank you for voting!
Countertop Dishwasher - Non Whirlpool
2 of 5 people
found this instruction helpful.
-
Peter from PLEASANT PR, WI
- Very Easy
- Less than 15 mins
Since I have All Whirlpool appliances in the home, the only one not a Whirlpool was a counter top dishwasher that looks exactly like it could be a Whirlpool and so not to be the odd unit out, I labeled it with with a Whirlpool logo nameplate on the face of the door. Now everything matches perfectly and all in the same exact color white t
... Read more
oo.
Just measured and marked where the plate was to be located, cleaned that part of the surface, peeled the backing and carefully placed the logo name plate in place and pressed it on. Voila. Done and looks original as well. Call me the big, deep fakearooski.
Just measured and marked where the plate was to be located, cleaned that part of the surface, peeled the backing and carefully placed the logo name plate in place and pressed it on. Voila. Done and looks original as well. Call me the big, deep fakearooski.
Read less
Was this helpful?
Thank you for voting!
Did not have ice maker
3 of 8 people
found this instruction helpful.
-
Marisa from TEMPE, AZ
- Very Easy
- 1- 2 hours
-
Nutdriver
Followed online video instructions
Was this helpful?
Thank you for voting!
I broke the cooling fan while cleaning the heat exchange area
1 of 3 people
found this instruction helpful.
-
Daniel from N TONAWANDA, NY
- Really Easy
- 15 - 30 mins
Very simple, pulled old fan blade off and pushed new fan blade onto shaft. Perfect fit!
Was this helpful?
Thank you for voting!
Doesn’t cool
1 of 3 people
found this instruction helpful.
-
Benjamin from WASCO, CA
- Very Easy
- Less than 15 mins
-
Screw drivers
Work just perfect
Was this helpful?
Thank you for voting!
you have to turn it off and on to run.
0 of 1 people
found this instruction helpful.
-
chris from woodland hills, CA
- Really Easy
- Less than 15 mins
-
Nutdriver
Just like the video showed me.It still does not work. Have to turn it off and on to make it start up.I also replaced thermostat in freezer. Does not work.
Was this helpful?
Thank you for voting!
replace hinge bracket on fridge door
0 of 2 people
found this instruction helpful.
-
Albert from Dunmore, PA
- Easy
- 15 - 30 mins
-
Socket set
taped the door shut ,measured a block of wood and stuck it under the door for support.....unbolted bottom hinge,slipped on hinge bracket and reassembled.no muss no fuss.
Was this helpful?
Thank you for voting!
Refer wasn't cold but freezer was working great
-
Heather from Marysville, WA
- Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
Removed the ice maker (3 screws) removed the back plate (2 screws) Remove the bracket holding the fan in (2 screws) Remove the rubber mounts on the old motor and the fan itself off the old motor. Then put it all back together in reverse order.
Was this helpful?
Thank you for voting!
refrigerator section was not cooling
-
Vernon from Carmel, ME
- Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
unplug, turn water off, remove ice maker & unplug,remove back panel remove old fan unit & unplug remove fan remove fan blades just pull off install new fan, put fan blades on new fan & install on bracket & re install plug in re install back panel. plug in ice maker re install ice maker . turn water back on plug refrigerator back in ( q
... Read more
uite easy )
Read less
Was this helpful?
Thank you for voting!
the part was loos
-
Deravine from New London, CT
- Easy
- 15 - 30 mins
-
Wrench set
the repair it good and easy ,vo helper to do it.
Was this helpful?
Thank you for voting!
Broken rear support wheel
-
Adam from Freeland, MI
- Easy
- 15 - 30 mins
-
Nutdriver, Socket set
remove fiber grill cover, remove large bolt holding under frame ( with a 2X4 block, place under refrigerator on outside edge so frame can drop down.) remove pin from broken wheel, replace reversing proceedure. Note: when blocking refrigerator, care must be taken not to let block extend under entire frame. it only needs to be placed app
... Read more
rox 3/4" under edge of refrigerator.
Read less
Was this helpful?
Thank you for voting!